Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <20200119163104.13274-1-samuel@sholland.org> <20200119163104.13274-3-samuel@sholland.org>
 <20200121090539.mgswdzfharrfy5ad@gilmour.lan> <8006a501-733e-b998-edb3-378769cd3a4c@sholland.org>
 <20200124163318.y3pykbfgpwsqiru6@gilmour.lan>
In-Reply-To: <20200124163318.y3pykbfgpwsqiru6@gilmour.lan>
From:   Vasily Khoruzhick <anarsoul@gmail.com>
Date:   Fri, 24 Jan 2020 15:11:29 -0800
Message-ID: <CA+E=qVf0wcds7SzLOQT5BS2fVXT5w6-e9yhTK4=BXBm==P3Kzg@mail.gmail.com>
Subject: Re: [PATCH 3/9] arm64: dts: allwinner: pinebook: Remove unused AXP803 regulators
To:     Maxime Ripard <maxime@cerno.tech>
Cc:     Samuel Holland <samuel@sholland.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Chen-Yu Tsai <wens@csie.org>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        linux-sunxi <linux-sunxi@googlegroups.com>,
        Rob Herring <robh+dt@kernel.org>,
        arm-linux <linux-arm-kernel@lists.infradead.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Fri, Jan 24, 2020 at 8:36 AM Maxime Ripard <maxime@cerno.tech> wrote:
>
> On Tue, Jan 21, 2020 at 09:14:02PM -0600, Samuel Holland wrote:
> > On 1/21/20 3:05 AM, Maxime Ripard wrote:
> > > On Sun, Jan 19, 2020 at 10:30:58AM -0600, Samuel Holland wrote:
> > >> The Pinebook does not use the CSI bus on the A64. In fact it does not
> > >> use GPIO port E for anything at all. Thus the following regulators are
> > >> not used and do not need voltages set:
> > >>
> > >>  - ALDO1: Connected to VCC-PE only
> > >>  - DLDO3: Not connected
> > >>  - ELDO3: Not connected
> > >>
> > >> Signed-off-by: Samuel Holland <samuel@sholland.org>
> > >> ---
> > >>  .../boot/dts/allwinner/sun50i-a64-pinebook.dts   | 16 +---------------
> > >>  1 file changed, 1 insertion(+), 15 deletions(-)
> > >>
> > >> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
> > >> index ff32ca1a495e..8e7ce6ad28dd 100644
> > >> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
> > >> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
> > >> @@ -202,9 +202,7 @@
> > >>  };
> > >>
> > >>  &reg_aldo1 {
> > >> -  regulator-min-microvolt = <2800000>;
> > >> -  regulator-max-microvolt = <2800000>;
> > >> -  regulator-name = "vcc-csi";
> > >> +  regulator-name = "vcc-pe";
> > >>  };
> > >
> > > If it's connected to PE, I'd expect the voltage to be at 3.3v?
> >
> > If we provide voltage constraints, the regulator core will enable the regulator
> > and set its voltage at boot. That seems like a bit of a waste.
>
> I'm not sure the regulator core enables them if there's neither
> regulator-boot-on nor regulator-always-on.
>
> > I don't think the voltage really matters, since nothing is plugged in to the
> > port. ALDO1 can't go over 3.3V anyway, so even if it does get turned on for some
> > reason, nothing will get damaged.
>
> Looking at the schematics, it looks like the PE pins are connected to
> the front-facing camera?

The only camera on Pinebook is UVC

>
> Maxime
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel