Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Ludovic Barre <ludovic.barre@st.com>
To:     Ulf Hansson <ulf.hansson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>
CC:     <srinivas.kandagatla@linaro.org>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        Alexandre Torgue <alexandre.torgue@st.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-mmc@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH V2 8/9] mmc: mmci: sdmmc: add voltage switch functions
Date:   Tue, 28 Jan 2020 10:06:35 +0100
Message-ID: <20200128090636.13689-9-ludovic.barre@st.com>
In-Reply-To: <20200128090636.13689-1-ludovic.barre@st.com>
References: <20200128090636.13689-1-ludovic.barre@st.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

To prepare the voltage switch procedure, the VSWITCHEN bit must be
set before sending the cmd11.
To confirm completion of voltage switch, the VSWEND flag must be
checked.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 drivers/mmc/host/mmci.h             |  4 +++
 drivers/mmc/host/mmci_stm32_sdmmc.c | 43 +++++++++++++++++++++++++++++
 2 files changed, 47 insertions(+)

diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index c3bc0a38d4cb..e1a9b96a3396 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -165,6 +165,7 @@
 /* Extended status bits for the STM32 variants */
 #define MCI_STM32_BUSYD0	BIT(20)
 #define MCI_STM32_BUSYD0END	BIT(21)
+#define MCI_STM32_VSWEND	BIT(25)
 
 #define MMCICLEAR		0x038
 #define MCI_CMDCRCFAILCLR	(1 << 0)
@@ -182,6 +183,9 @@
 #define MCI_ST_SDIOITC		(1 << 22)
 #define MCI_ST_CEATAENDC	(1 << 23)
 #define MCI_ST_BUSYENDC		(1 << 24)
+/* Extended clear bits for the STM32 variants */
+#define MCI_STM32_VSWENDC	BIT(25)
+#define MCI_STM32_CKSTOPC	BIT(26)
 
 #define MMCIMASK0		0x03c
 #define MCI_CMDCRCFAILMASK	(1 << 0)
diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index fa875febcc85..f76e82f8f12f 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -32,6 +32,7 @@
 #define DLYB_CFGR_UNIT_MAX	127
 
 #define DLYB_LNG_TIMEOUT_US	1000
+#define SDMMC_VSWEND_TIMEOUT_US 10000
 
 struct sdmmc_lli_desc {
 	u32 idmalar;
@@ -265,6 +266,7 @@ static void mmci_sdmmc_set_pwrreg(struct mmci_host *host, unsigned int pwr)
 	struct mmc_ios ios = host->mmc->ios;
 	struct sdmmc_dlyb *dlyb = host->variant_priv;
 
+	/* adds OF options */
 	pwr = host->pwr_reg_add;
 
 	sdmmc_dlyb_input_ck(dlyb);
@@ -291,6 +293,10 @@ static void mmci_sdmmc_set_pwrreg(struct mmci_host *host, unsigned int pwr)
 		writel(MCI_IRQENABLE | host->variant->start_err,
 		       host->base + MMCIMASK0);
 
+		/* preserves voltage switch bits */
+		pwr |= host->pwr_reg & (MCI_STM32_VSWITCHEN |
+					MCI_STM32_VSWITCH);
+
 		/*
 		 * After a power-cycle state, we must set the SDMMC in
 		 * Power-off. The SDMMC_D[7:0], SDMMC_CMD and SDMMC_CK are
@@ -456,6 +462,41 @@ static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	return sdmmc_dlyb_phase_tuning(host, opcode);
 }
 
+static void sdmmc_pre_sig_volt_vswitch(struct mmci_host *host)
+{
+	/* clear the voltage switch completion flag */
+	writel_relaxed(MCI_STM32_VSWENDC, host->base + MMCICLEAR);
+	/* enable Voltage switch procedure */
+	mmci_write_pwrreg(host, host->pwr_reg | MCI_STM32_VSWITCHEN);
+}
+
+static int sdmmc_post_sig_volt_switch(struct mmci_host *host,
+				      struct mmc_ios *ios)
+{
+	unsigned long flags;
+	u32 status;
+	int ret = 0;
+
+	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
+		spin_lock_irqsave(&host->lock, flags);
+		mmci_write_pwrreg(host, host->pwr_reg | MCI_STM32_VSWITCH);
+		spin_unlock_irqrestore(&host->lock, flags);
+
+		/* wait voltage switch completion while 10ms */
+		ret = readl_relaxed_poll_timeout(host->base + MMCISTATUS,
+						 status,
+						 (status & MCI_STM32_VSWEND),
+						 10, SDMMC_VSWEND_TIMEOUT_US);
+
+		writel_relaxed(MCI_STM32_VSWENDC | MCI_STM32_CKSTOPC,
+			       host->base + MMCICLEAR);
+		mmci_write_pwrreg(host, host->pwr_reg &
+				  ~(MCI_STM32_VSWITCHEN | MCI_STM32_VSWITCH));
+	}
+
+	return ret;
+}
+
 static struct mmci_host_ops sdmmc_variant_ops = {
 	.validate_data = sdmmc_idma_validate_data,
 	.prep_data = sdmmc_idma_prep_data,
@@ -467,6 +508,8 @@ static struct mmci_host_ops sdmmc_variant_ops = {
 	.set_clkreg = mmci_sdmmc_set_clkreg,
 	.set_pwrreg = mmci_sdmmc_set_pwrreg,
 	.busy_complete = sdmmc_busy_complete,
+	.pre_sig_volt_switch = sdmmc_pre_sig_volt_vswitch,
+	.post_sig_volt_switch = sdmmc_post_sig_volt_switch,
 };
 
 void sdmmc_variant_init(struct mmci_host *host)
-- 
2.17.1