Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751481AbWBCUhz (ORCPT ); Fri, 3 Feb 2006 15:37:55 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751480AbWBCUhz (ORCPT ); Fri, 3 Feb 2006 15:37:55 -0500 Received: from osl1smout1.broadpark.no ([80.202.4.58]:21949 "EHLO osl1smout1.broadpark.no") by vger.kernel.org with ESMTP id S1751481AbWBCUhy (ORCPT ); Fri, 3 Feb 2006 15:37:54 -0500 Date: Fri, 03 Feb 2006 21:44:20 +0100 From: Helge Hafting Subject: Unable to read DVDs - what could be wrong? To: linux-kernel@vger.kernel.org Message-id: <43E3C0A4.2080009@broadpark.no> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7BIT X-Accept-Language: en-us, en User-Agent: Debian Thunderbird 1.0.7 (X11/20051019) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1855 Lines: 47 (Using kernel 2.6.16rc2 on amd64) I have this dvd writer: hda: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive It works well for reading and burning CDs, but it seem to be unable to use DVDs. I tried to mount a dvd, and got "No medium found". cat /dev/hda also got that message, so it can't be a missing fs driver. I only have one data dvd - it could theoretically be broken. But attempts to play movies are equally fruitless, and I know those works. Booting with a dvd in the drive gives me this in dmesg: VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 94X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hda: packet command error: status=0x51 { DriveReady SeekComplete Error } hda: packet command error: error=0x44 { AbortedCommand LastFailedSense=0x04 } ide: failed opcode was: unknown ATAPI device hda: Error: Hardware error -- (Sense key=0x04) Tracking servo failure -- (asc=0x09, ascq=0x01) The failed "Read Cd/Dvd Capacity" packet command was: "25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 " I have upgraded the device from firmware 1.01 to the latest which is 1.07. That and a cold boot changed nothing. Am I doing something wrong/stupid here? Strange if it is broken, I haven't used it that much and it is flawless with CDs. Helge Hafting - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/