Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Thu, 30 Jan 2020 14:45:30 +0100
From:   Guido =?iso-8859-1?Q?G=FCnther?= <agx@sigxcpu.org>
To:     Tomas Novotny <tomas@novotny.cz>
Cc:     Jonathan Cameron <jic23@kernel.org>,
        Hartmut Knaack <knaack.h@gmx.de>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
        "Angus Ainslie (Purism)" <angus@akkea.ca>,
        Marco Felsch <m.felsch@pengutronix.de>,
        Thomas Gleixner <tglx@linutronix.de>,
        linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] iio: vncl4000: Enable runtime pm for vcnl4200/4040
Message-ID: <20200130134530.GA287278@bogon.m.sigxcpu.org>
References: <cover.1579531608.git.agx@sigxcpu.org>
 <65d5c7b562f9f7c17857310e8538afe0bb1b2ddb.1579531608.git.agx@sigxcpu.org>
 <20200120182853.37a724fa@tomas.local.tbs-biometrics.cz>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20200120182853.37a724fa@tomas.local.tbs-biometrics.cz>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,
On Mon, Jan 20, 2020 at 06:28:53PM +0100, Tomas Novotny wrote:
> Hi Guido,
> 
> On Mon, 20 Jan 2020 16:01:24 +0100
> Guido G?nther <agx@sigxcpu.org> wrote:
> 
> > This is modelled after the vcnl4035 driver. The vcnl4000 does not seem
> > to have a way to save power so we just leave it running.
> 
> To be precise - only the on-demand measurement is done for vcnl4000/4010/4020
> in this driver (so it is not running in the end). The periodic measurement
> (only) is done for vcnl4040/4200.

Fixed in the commit message.

> 
> Note below.
> 
> > Signed-off-by: Guido G?nther <agx@sigxcpu.org>
> > ---
> >  drivers/iio/light/vcnl4000.c | 126 +++++++++++++++++++++++++++++++++--
> >  1 file changed, 120 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
> > index 8f198383626b..b0396a3f1915 100644
> > --- a/drivers/iio/light/vcnl4000.c
> > +++ b/drivers/iio/light/vcnl4000.c
> > @@ -22,6 +22,7 @@
> >  #include <linux/i2c.h>
> >  #include <linux/err.h>
> >  #include <linux/delay.h>
> > +#include <linux/pm_runtime.h>
> >  
> >  #include <linux/iio/iio.h>
> >  #include <linux/iio/sysfs.h>
> > @@ -57,6 +58,8 @@
> >  #define VCNL4000_AL_OD		BIT(4) /* start on-demand ALS measurement */
> >  #define VCNL4000_PS_OD		BIT(3) /* start on-demand proximity measurement */
> >  
> > +#define VCNL4000_SLEEP_DELAY_MS	2000 /* before we enter pm_runtime_suspend */
> > +
> >  enum vcnl4000_device_ids {
> >  	VCNL4000,
> >  	VCNL4010,
> > @@ -87,6 +90,7 @@ struct vcnl4000_chip_spec {
> >  	int (*init)(struct vcnl4000_data *data);
> >  	int (*measure_light)(struct vcnl4000_data *data, int *val);
> >  	int (*measure_proximity)(struct vcnl4000_data *data, int *val);
> > +	int (*set_power_state)(struct vcnl4000_data *data, bool on);
> >  };
> >  
> >  static const struct i2c_device_id vcnl4000_id[] = {
> > @@ -99,6 +103,12 @@ static const struct i2c_device_id vcnl4000_id[] = {
> >  };
> >  MODULE_DEVICE_TABLE(i2c, vcnl4000_id);
> >  
> > +static int vcnl4000_set_power_state(struct vcnl4000_data *data, bool on)
> > +{
> > +	/* no suspend op */
> > +	return 0;
> > +}
> > +
> >  static int vcnl4000_init(struct vcnl4000_data *data)
> >  {
> >  	int ret, prod_id;
> > @@ -127,9 +137,24 @@ static int vcnl4000_init(struct vcnl4000_data *data)
> >  	data->al_scale = 250000;
> >  	mutex_init(&data->vcnl4000_lock);
> >  
> > +	ret = data->chip_spec->set_power_state(data, true);
> > +	if (ret < 0)
> > +		return ret;
> > +
> >  	return 0;
> >  };
> >  
> > +static int vcnl4200_set_power_state(struct vcnl4000_data *data, bool on)
> > +{
> > +	u16 val = on ? 0 /* power on */ : 1 /* shut down */;
> > +	int ret;
> > +
> > +	ret = i2c_smbus_write_word_data(data->client, VCNL4200_AL_CONF, val);
> > +	if (ret < 0)
> > +		return ret;
> > +	return i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF1, val);
> > +}
> > +
> >  static int vcnl4200_init(struct vcnl4000_data *data)
> >  {
> >  	int ret, id;
> > @@ -155,11 +180,7 @@ static int vcnl4200_init(struct vcnl4000_data *data)
> >  
> >  	data->rev = (ret >> 8) & 0xf;
> >  
> > -	/* Set defaults and enable both channels */
> > -	ret = i2c_smbus_write_word_data(data->client, VCNL4200_AL_CONF, 0);
> > -	if (ret < 0)
> > -		return ret;
> > -	ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF1, 0);
> > +	ret = data->chip_spec->set_power_state(data, true);
> >  	if (ret < 0)
> >  		return ret;
> >  
> > @@ -291,24 +312,28 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
> >  		.init = vcnl4000_init,
> >  		.measure_light = vcnl4000_measure_light,
> >  		.measure_proximity = vcnl4000_measure_proximity,
> > +		.set_power_state = vcnl4000_set_power_state,
> >  	},
> >  	[VCNL4010] = {
> >  		.prod = "VCNL4010/4020",
> >  		.init = vcnl4000_init,
> >  		.measure_light = vcnl4000_measure_light,
> >  		.measure_proximity = vcnl4000_measure_proximity,
> > +		.set_power_state = vcnl4000_set_power_state,
> >  	},
> >  	[VCNL4040] = {
> >  		.prod = "VCNL4040",
> >  		.init = vcnl4200_init,
> >  		.measure_light = vcnl4200_measure_light,
> >  		.measure_proximity = vcnl4200_measure_proximity,
> > +		.set_power_state = vcnl4200_set_power_state,
> >  	},
> >  	[VCNL4200] = {
> >  		.prod = "VCNL4200",
> >  		.init = vcnl4200_init,
> >  		.measure_light = vcnl4200_measure_light,
> >  		.measure_proximity = vcnl4200_measure_proximity,
> > +		.set_power_state = vcnl4200_set_power_state,
> >  	},
> >  };
> >  
> > @@ -323,6 +348,23 @@ static const struct iio_chan_spec vcnl4000_channels[] = {
> >  	}
> >  };
> >  
> > +static int vcnl4000_set_pm_runtime_state(struct vcnl4000_data *data, bool on)
> > +{
> > +	struct device *dev = &data->client->dev;
> > +	int ret;
> > +
> > +	if (on) {
> > +		ret = pm_runtime_get_sync(dev);
> > +		if (ret < 0)
> > +			pm_runtime_put_noidle(dev);
> > +	} else {
> > +		pm_runtime_mark_last_busy(dev);
> > +		ret = pm_runtime_put_autosuspend(dev);
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> >  static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> >  				struct iio_chan_spec const *chan,
> >  				int *val, int *val2, long mask)
> > @@ -332,6 +374,10 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> >  
> >  	switch (mask) {
> >  	case IIO_CHAN_INFO_RAW:
> > +		ret = vcnl4000_set_pm_runtime_state(data, true);
> > +		if  (ret < 0)
> > +			return ret;
> > +
> >  		switch (chan->type) {
> >  		case IIO_LIGHT:
> >  			ret = data->chip_spec->measure_light(data, val);
> > @@ -346,6 +392,7 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> >  		default:
> >  			ret = -EINVAL;
> >  		}
> > +		vcnl4000_set_pm_runtime_state(data, false);
> >  		return ret;
> >  	case IIO_CHAN_INFO_SCALE:
> >  		if (chan->type != IIO_LIGHT)
> > @@ -394,7 +441,22 @@ static int vcnl4000_probe(struct i2c_client *client,
> >  	indio_dev->name = VCNL4000_DRV_NAME;
> >  	indio_dev->modes = INDIO_DIRECT_MODE;
> >  
> > -	return devm_iio_device_register(&client->dev, indio_dev);
> > +	ret = pm_runtime_set_active(&client->dev);
> > +	if (ret < 0)
> > +		goto fail_poweroff;
> > +
> > +	ret = iio_device_register(indio_dev);
> > +	if (ret < 0)
> > +		goto fail_poweroff;
> > +
> > +	pm_runtime_enable(&client->dev);
> > +	pm_runtime_set_autosuspend_delay(&client->dev, VCNL4000_SLEEP_DELAY_MS);
> > +	pm_runtime_use_autosuspend(&client->dev);
> > +
> > +	return 0;
> > +fail_poweroff:
> > +	data->chip_spec->set_power_state(data, false);
> > +	return ret;
> >  }
> >  
> >  static const struct of_device_id vcnl_4000_of_match[] = {
> > @@ -422,13 +484,65 @@ static const struct of_device_id vcnl_4000_of_match[] = {
> >  };
> >  MODULE_DEVICE_TABLE(of, vcnl_4000_of_match);
> >  
> > +static int vcnl4000_remove(struct i2c_client *client)
> > +{
> > +	struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > +	struct vcnl4000_data *data = iio_priv(indio_dev);
> > +
> > +	pm_runtime_dont_use_autosuspend(&client->dev);
> > +	pm_runtime_disable(&client->dev);
> > +	iio_device_unregister(indio_dev);
> > +	pm_runtime_set_suspended(&client->dev);
> > +
> > +	return data->chip_spec->set_power_state(data, false);
> > +}
> > +
> > +static int __maybe_unused vcnl4000_runtime_suspend(struct device *dev)
> > +{
> > +	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> > +	struct vcnl4000_data *data = iio_priv(indio_dev);
> > +	int ret;
> > +
> > +	ret = data->chip_spec->set_power_state(data, false);
> > +
> > +	return ret;
> > +}
> > +
> > +static int __maybe_unused vcnl4000_runtime_resume(struct device *dev)
> > +{
> > +	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> > +	struct vcnl4000_data *data = iio_priv(indio_dev);
> > +	unsigned int msecs;
> > +	int ret;
> > +
> > +	ret = data->chip_spec->set_power_state(data, true);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	/* wait for 1 ALS integration cycle */
> > +	msecs =  data->vcnl4200_al.sampling_rate ?
> > +		ktime_to_ms(data->vcnl4200_al.sampling_rate) : 100;
> > +	msleep(ktime_to_ms(msecs));
> 
> What about setting the vcnl4200_{al,ps}.last_measurement to ktime_get() in
> case of vcnl4040/4200? The sleeping will be handled in the respective channel
> during measurement. And it will be much faster if you are interested in
> proximity reading only (you will be blocked only for proximity's 4.2ms
> instead of 54ms because of ambient light).

Good point. By just moving that into vcnl4200_set_power_state this
becomes even more readable.

Cheers,
 -- Guido

> 
> The sleeping for vcnl4000 is not needed, as there is currently on-demand
> measurement only.
> 
> BTW the second ktime_to_ms shouldn't be called.
> 
> Tomas
> 
> > +	return 0;
> > +}
> > +
> > +static const struct dev_pm_ops vcnl4000_pm_ops = {
> > +	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> > +				pm_runtime_force_resume)
> > +	SET_RUNTIME_PM_OPS(vcnl4000_runtime_suspend,
> > +			   vcnl4000_runtime_resume, NULL)
> > +};
> > +
> >  static struct i2c_driver vcnl4000_driver = {
> >  	.driver = {
> >  		.name   = VCNL4000_DRV_NAME,
> > +		.pm	= &vcnl4000_pm_ops,
> >  		.of_match_table = vcnl_4000_of_match,
> >  	},
> >  	.probe  = vcnl4000_probe,
> >  	.id_table = vcnl4000_id,
> > +	.remove	= vcnl4000_remove,
> >  };
> >  
> >  module_i2c_driver(vcnl4000_driver);
>