Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1946230AbWBDAub (ORCPT ); Fri, 3 Feb 2006 19:50:31 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1946229AbWBDAub (ORCPT ); Fri, 3 Feb 2006 19:50:31 -0500 Received: from sorrow.cyrius.com ([65.19.161.204]:47117 "EHLO sorrow.cyrius.com") by vger.kernel.org with ESMTP id S1946230AbWBDAua (ORCPT ); Fri, 3 Feb 2006 19:50:30 -0500 Date: Sat, 4 Feb 2006 00:50:14 +0000 From: Martin Michlmayr To: stern@rowland.harvard.edu, jgarzik@pobox.com Cc: linux-kernel@vger.kernel.org Subject: Bad interaction between uhci_hcd and de2104x Message-ID: <20060204005014.GA13351@deprecation.cyrius.com> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="zhXaljGHf11kAtnf" Content-Disposition: inline User-Agent: Mutt/1.5.11 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 21176 Lines: 489 --zhXaljGHf11kAtnf Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I have a machine on which the de2104x driver doesn't work when uhci_hcd is loaded. It used to work fine with 2.4 and the tulip driver (and usb-uhci). Basically, when I boot I get the following traceback and then eth0 doesn't work. When I unload de2104x and uhci_hcd and load only de2104x again then Ethernet works. Similarly, when I completely blacklist the uhci_hcd module the de2104x driver works without any problems. eth0: enabling interface eth0: set link 10baseT auto eth0: mode 0x7ffc0040, sia 0x10c4,0xffffef01,0xffffffff,0xffff0008 eth0: set mode 0x7ffc0040, set sia 0xef01,0xffff,0x8 irq 10: nobody cared (try booting with the "irqpoll" option) [] __report_bad_irq+0x31/0x73 [] note_interrupt+0x75/0x98 [] __do_IRQ+0x67/0x91 [] do_IRQ+0x19/0x24 [] common_interrupt+0x1a/0x20 [] __do_softirq+0x2c/0x7d [] do_softirq+0x22/0x26 [] do_IRQ+0x1e/0x24 [] common_interrupt+0x1a/0x20 [] de_set_rx_mode+0xf/0x12 [de2104x] [] de_init_hw+0x6d/0x76 [de2104x] [] de_open+0x64/0xe4 [de2104x] [] dev_open+0x30/0x66 [] dev_change_flags+0x4d/0xf0 [] devinet_ioctl+0x224/0x4bd [] do_ioctl+0x21/0x50 [] vfs_ioctl+0x152/0x161 [] sys_ioctl+0x48/0x65 [] syscall_call+0x7/0xb handlers: [] (usb_hcd_irq+0x0/0x56 [usbcore]) Disabling IRQ #10 lspci information: 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 02) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Flags: bus master, medium devsel, latency 64, IRQ 10 I/O ports at e400 [size=32] 0000:00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 11) Flags: bus master, medium devsel, latency 64, IRQ 10 I/O ports at e800 [size=128] Memory at e8000000 (32-bit, non-prefetchable) [size=128] Expansion ROM at e7000000 [disabled] [size=256K] Attached are two boot logs: 1. Booting, loading both drivers, unloading both, loading de2104x again. 2. Booting with the uhci_hcd module being blacklisted. -- Martin Michlmayr http://www.cyrius.com/ --zhXaljGHf11kAtnf Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="2.6.15-dereg-hcd-reload-de" Linux version 2.6.15-1-486 (Debian 2.6.15-3) (horms@verge.net.au) (gcc version 4.0.3 20060115 (prerelease) (Debian 4.0.2-7)) #1 Wed Jan 18 14:56:12 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000003ff0000 (usable) BIOS-e820: 0000000003ff0000 - 0000000003ff3000 (ACPI NVS) BIOS-e820: 0000000003ff3000 - 0000000004000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 63MB LOWMEM available. On node 0 totalpages: 16368 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 12272 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:0 DMI 2.1 present. ACPI: RSDP (v000 VIAVP3 ) @ 0x000f7180 ACPI: RSDT (v001 VIAVP3 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x03ff3000 ACPI: FADT (v001 VIAVP3 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x03ff3040 ACPI: DSDT (v001 VIAVP3 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x5008 Allocating PCI resources starting at 10000000 (gap: 04000000:fbff0000) Built 1 zonelists Kernel command line: root=/dev/hda1 ro No local APIC present or hardware disabled mapped APIC to ffffd000 (01081000) Initializing CPU#0 PID hash table entries: 256 (order: 8, 4096 bytes) Detected 400.955 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 57540k/65472k available (1516k kernel code, 7528k reserved, 574k data, 228k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 802.36 BogoMIPS (lpj=401184) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002 00000000 00000000 00000000 mtrr: v2.0 (20020519) CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e00) checking if image is initramfs... it is Freeing initrd memory: 4327k freed NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 5000-50ff claimed by vt82c586 ACPI Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: e4000000-e5ffffff PREFETCH window: e6000000-e6ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 audit: initializing netlink socket (disabled) audit(1139015562.912:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Activating ISA DMA hang workarounds. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 5 EISA: Detected 0 cards. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode ACPI wakeup devices: USB0 USB1 ACPI: (supports S0 S1 S5) Freeing unused kernel memory: 228k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 2 throttling states) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci0000:00:07.1 ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... de2104x PCI Ethernet driver v0.7 (Mar 17, 2004) usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 hda: Maxtor 90871U2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 de0: SROM leaf offset 30, default media 10baseT auto de0: media block #0: 10baseT-FD de0: media block #1: BNC de0: media block #2: 10baseT-HD eth0: 21041 at 0xc4834000, 00:80:c8:33:4f:96, IRQ 10 ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 PCI: Via IRQ fixup for 0000:00:07.2, from 11 to 10 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 10, io base 0x0000e400 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Probing IDE interface ide1... hda: max request size: 128KiB hda: 16992864 sectors (8700 MB) w/512KiB Cache, CHS=16858/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 < hda5 hda6 > Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA Apollo MVP3 chipset agpgart: AGP aperture is 64M @ 0xe0000000 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] Real Time Clock Driver v1.12 input: PC Speaker as /class/input/input1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 mice: PS/2 mouse device common for all mice Adding 305192k swap on /dev/hda5. Priority:-1 extents:1 across:305192k EXT3 FS on hda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: enabling interface eth0: set link 10baseT auto eth0: mode 0x7ffc0040, sia 0x10c4,0xffffef01,0xffffffff,0xffff0008 eth0: set mode 0x7ffc0040, set sia 0xef01,0xffff,0x8 irq 10: nobody cared (try booting with the "irqpoll" option) [] __report_bad_irq+0x31/0x73 [] note_interrupt+0x75/0x98 [] __do_IRQ+0x67/0x91 [] do_IRQ+0x19/0x24 [] common_interrupt+0x1a/0x20 [] __do_softirq+0x2c/0x7d [] do_softirq+0x22/0x26 [] do_IRQ+0x1e/0x24 [] common_interrupt+0x1a/0x20 [] de_set_rx_mode+0xf/0x12 [de2104x] [] de_init_hw+0x6d/0x76 [de2104x] [] de_open+0x64/0xe4 [de2104x] [] dev_open+0x30/0x66 [] dev_change_flags+0x4d/0xf0 [] devinet_ioctl+0x224/0x4bd [] do_ioctl+0x21/0x50 [] vfs_ioctl+0x152/0x161 [] sys_ioctl+0x48/0x65 [] syscall_call+0x7/0xb handlers: [] (usb_hcd_irq+0x0/0x56 [usbcore]) Disabling IRQ #10 eth0: link up, media 10baseT auto NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present uhci_hcd 0000:00:07.2: remove, state 1 usb usb1: USB disconnect, address 1 uhci_hcd 0000:00:07.2: USB bus 1 deregistered ACPI: PCI interrupt for device 0000:00:07.2 disabled eth0: disabling interface ACPI: PCI interrupt for device 0000:00:0b.0 disabled ACPI: PCI interrupt for device 0000:00:0b.0 disabled de2104x PCI Ethernet driver v0.7 (Mar 17, 2004) ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 de0: SROM leaf offset 30, default media 10baseT auto de0: media block #0: 10baseT-FD de0: media block #1: BNC de0: media block #2: 10baseT-HD eth0: 21041 at 0xc4834000, 00:80:c8:33:4f:96, IRQ 10 eth0: enabling interface eth0: set link 10baseT auto eth0: mode 0x7ffc0040, sia 0x10c4,0xffffef01,0xffffffff,0xffff0008 eth0: set mode 0x7ffc0040, set sia 0xef01,0xffff,0x8 ADDRCONF(NETDEV_UP): eth0: link is not ready eth0: link up, media 10baseT auto ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present --zhXaljGHf11kAtnf Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="2.6.15-no-hcd" Linux version 2.6.15-1-486 (Debian 2.6.15-3) (horms@verge.net.au) (gcc version 4.0.3 20060115 (prerelease) (Debian 4.0.2-7)) #1 Wed Jan 18 14:56:12 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000003ff0000 (usable) BIOS-e820: 0000000003ff0000 - 0000000003ff3000 (ACPI NVS) BIOS-e820: 0000000003ff3000 - 0000000004000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 63MB LOWMEM available. On node 0 totalpages: 16368 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 12272 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:0 DMI 2.1 present. ACPI: RSDP (v000 VIAVP3 ) @ 0x000f7180 ACPI: RSDT (v001 VIAVP3 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x03ff3000 ACPI: FADT (v001 VIAVP3 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x03ff3040 ACPI: DSDT (v001 VIAVP3 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x5008 Allocating PCI resources starting at 10000000 (gap: 04000000:fbff0000) Built 1 zonelists Kernel command line: root=/dev/hda1 ro No local APIC present or hardware disabled mapped APIC to ffffd000 (01081000) Initializing CPU#0 PID hash table entries: 256 (order: 8, 4096 bytes) Detected 401.032 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 59488k/65472k available (1516k kernel code, 5580k reserved, 574k data, 228k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 802.33 BogoMIPS (lpj=401167) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002 00000000 00000000 00000000 mtrr: v2.0 (20020519) CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e00) checking if image is initramfs... it is Freeing initrd memory: 2379k freed NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 5000-50ff claimed by vt82c586 ACPI Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: e4000000-e5ffffff PREFETCH window: e6000000-e6ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 audit: initializing netlink socket (disabled) audit(1139016545.868:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Activating ISA DMA hang workarounds. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 5 EISA: Detected 0 cards. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode ACPI wakeup devices: USB0 USB1 ACPI: (supports S0 S1 S5) Freeing unused kernel memory: 228k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 2 throttling states) Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA Apollo MVP3 chipset agpgart: AGP aperture is 64M @ 0xe0000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci0000:00:07.1 ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... de2104x PCI Ethernet driver v0.7 (Mar 17, 2004) hda: Maxtor 90871U2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 de0: SROM leaf offset 30, default media 10baseT auto de0: media block #0: 10baseT-FD de0: media block #1: BNC de0: media block #2: 10baseT-HD eth0: 21041 at 0xc4802000, 00:80:c8:33:4f:96, IRQ 10 Probing IDE interface ide1... hda: max request size: 128KiB hda: 16992864 sectors (8700 MB) w/512KiB Cache, CHS=16858/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 < hda5 hda6 > Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Real Time Clock Driver v1.12 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] Floppy drive(s): fd0 is 1.44M input: PC Speaker as /class/input/input1 FDC 0 is a post-1991 82077 mice: PS/2 mouse device common for all mice Adding 305192k swap on /dev/hda5. Priority:-1 extents:1 across:305192k EXT3 FS on hda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: enabling interface eth0: set link 10baseT auto eth0: mode 0x7ffc0040, sia 0x10c4,0xffffef01,0xffffffff,0xffff0008 eth0: set mode 0x7ffc0040, set sia 0xef01,0xffff,0x8 eth0: link up, media 10baseT auto NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present --zhXaljGHf11kAtnf-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/