Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Wed, 12 Feb 2020 13:35:00 +0530
From:   afzal mohammed <afzal.mohd.ma@gmail.com>
To:     linux-kernel@vger.kernel.org
Cc:     Guan Xuetao <gxt@pku.edu.cn>,
        Kate Stewart <kstewart@linuxfoundation.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Enrico Weigelt <info@metux.net>,
        Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH 13/18] unicore32: replace setup_irq() by request_irq()
Message-ID: <ee227282a3a8cddb037891bb70fd2264d682fe4f.1581478324.git.afzal.mohd.ma@gmail.com>
References: <cover.1581478323.git.afzal.mohd.ma@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <cover.1581478323.git.afzal.mohd.ma@gmail.com>
User-Agent: Mutt/1.9.3 (2018-01-21)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

request_irq() is preferred over setup_irq(). Existing callers of
setup_irq() reached mostly via 'init_IRQ()' & 'time_init()', while
memory allocators are ready by 'mm_init()'.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---

Since cc'ing cover letter to all maintainers/reviewers would be too
many, refer for cover letter,
 https://lkml.kernel.org/r/cover.1581478323.git.afzal.mohd.ma@gmail.com

 arch/unicore32/kernel/time.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c
index 8b217a761bf0..6f29c3ae95ff 100644
--- a/arch/unicore32/kernel/time.c
+++ b/arch/unicore32/kernel/time.c
@@ -72,13 +72,6 @@ static struct clocksource cksrc_puv3_oscr = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static struct irqaction puv3_timer_irq = {
-	.name		= "ost0",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= puv3_ost0_interrupt,
-	.dev_id		= &ckevt_puv3_osmr0,
-};
-
 void __init time_init(void)
 {
 	writel(0, OST_OIER);		/* disable any timer interrupts */
@@ -94,7 +87,9 @@ void __init time_init(void)
 	ckevt_puv3_osmr0.min_delta_ticks = MIN_OSCR_DELTA * 2;
 	ckevt_puv3_osmr0.cpumask = cpumask_of(0);
 
-	setup_irq(IRQ_TIMER0, &puv3_timer_irq);
+	if (request_irq(IRQ_TIMER0, puv3_ost0_interrupt,
+			IRQF_TIMER | IRQF_IRQPOLL, "ost0", &ckevt_puv3_osmr0))
+		pr_err("request_irq() on %s failed\n", "ost0");
 
 	clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE);
 	clockevents_register_device(&ckevt_puv3_osmr0);
-- 
2.24.1