Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Chunyan Zhang <zhang.lyra@gmail.com>
To:     Stephen Boyd <sboyd@kernel.org>,
        Michael Turquette <mturquette@baylibre.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>
Cc:     linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Orson Zhai <orsonzhai@gmail.com>,
        Baolin Wang <baolin.wang7@gmail.com>,
        Chunyan Zhang <zhang.lyra@gmail.com>,
        Chunyan Zhang <chunyan.zhang@unisoc.com>
Subject: [PATCH v5 0/7] Add clocks for Unisoc's SC9863A
Date:   Wed, 19 Feb 2020 12:09:08 +0800
Message-Id: <20200219040915.2153-1-zhang.lyra@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

Add SC9863A specific clock driver and devicetree bindings for it,
this patch add to support the new way of specifying parents
without name strings of clocks.

Also this patchset added support gate clock for pll which need to
wait a certain time for stable after being switched on.

Changes from v4:
* Fixed dt_binding_check warnings.

Changes from v3:
* Rebased onto v5.6-rc1.

Changes from v2:
* Addressed comments from Stephen:
- Remove ununsed header file from sc9863a-clk.c;
- Added comments for clocks which were marked with CLK_IGNORE_UNUSED,
  and removed some unnecessary CLK_IGNORE_UNUSED;
- Added error checking for sprd_clk_regmap_init().

* Addressed comments from Rob:
- Put some clocks under syscon nodes, since these clocks have the same
  physical address base with the syscon;
- Added clocks maxItems and listed out clock-names.

* Added Rob's reviewed-by on patch 4.

Changes from v1:
* Addressed comments:
- Removed redefine things;
- Switched DT bindings to yaml schema;
- Added macros for the new way of specifying clk parents; 
- Switched to use the new way of specifying clk parents;
- Clean CLK_IGNORE_UNUSED flags for some SC9863A clocks;
- Dropped the module alias;
- Use device_get_match_data() instead of of_match_node();

* Added Rob's Acked-by on patch 2.

Chunyan Zhang (6):
  dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC
    specific
  dt-bindings: clk: sprd: add bindings for sc9863a clock controller
  clk: sprd: Add dt-bindings include file for SC9863A
  clk: sprd: Add macros for referencing parents without strings
  clk: sprd: support to get regmap from parent node
  clk: sprd: add clocks support for SC9863A

Xiaolong Zhang (1):
  clk: sprd: add gate for pll clocks

 .../clock/{sprd.txt => sprd,sc9860-clk.txt}   |    2 +-
 .../bindings/clock/sprd,sc9863a-clk.yaml      |  110 +
 drivers/clk/sprd/Kconfig                      |    8 +
 drivers/clk/sprd/Makefile                     |    1 +
 drivers/clk/sprd/common.c                     |   10 +-
 drivers/clk/sprd/composite.h                  |   39 +-
 drivers/clk/sprd/div.h                        |   20 +-
 drivers/clk/sprd/gate.c                       |   17 +
 drivers/clk/sprd/gate.h                       |  120 +-
 drivers/clk/sprd/mux.h                        |   28 +-
 drivers/clk/sprd/pll.h                        |   55 +-
 drivers/clk/sprd/sc9863a-clk.c                | 1772 +++++++++++++++++
 include/dt-bindings/clock/sprd,sc9863a-clk.h  |  334 ++++
 13 files changed, 2462 insertions(+), 54 deletions(-)
 rename Documentation/devicetree/bindings/clock/{sprd.txt => sprd,sc9860-clk.txt} (98%)
 create mode 100644 Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
 create mode 100644 drivers/clk/sprd/sc9863a-clk.c
 create mode 100644 include/dt-bindings/clock/sprd,sc9863a-clk.h

-- 
2.20.1