Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH v4 3/3] clocksource: Add Low Power STM32 timers driver
To:     Benjamin Gaignard <benjamin.gaignard@st.com>, lee.jones@linaro.org,
        robh+dt@kernel.org, mark.rutland@arm.com,
        mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
        tglx@linutronix.de, fabrice.gasnier@st.com
Cc:     devicetree@vger.kernel.org,
        linux-stm32@st-md-mailman.stormreply.com,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Benjamin Gaignard <benjamin.gaignard@linaro.org>,
        Pascal Paillet <p.paillet@st.com>
References: <20200217134546.14562-1-benjamin.gaignard@st.com>
 <20200217134546.14562-4-benjamin.gaignard@st.com>
From:   Daniel Lezcano <daniel.lezcano@linaro.org>
Autocrypt: addr=daniel.lezcano@linaro.org; prefer-encrypt=mutual; keydata=
 xsFNBFv/yykBEADDdW8RZu7iZILSf3zxq5y8YdaeyZjI/MaqgnvG/c3WjFaunoTMspeusiFE
 sXvtg3ehTOoyD0oFjKkHaia1Zpa1m/gnNdT/WvTveLfGA1gH+yGes2Sr53Ht8hWYZFYMZc8V
 2pbSKh8wepq4g8r5YI1XUy9YbcTdj5mVrTklyGWA49NOeJz2QbfytMT3DJmk40LqwK6CCSU0
 9Ed8n0a+vevmQoRZJEd3Y1qXn2XHys0F6OHCC+VLENqNNZXdZE9E+b3FFW0lk49oLTzLRNIq
 0wHeR1H54RffhLQAor2+4kSSu8mW5qB0n5Eb/zXJZZ/bRiXmT8kNg85UdYhvf03ZAsp3qxcr
 xMfMsC7m3+ADOtW90rNNLZnRvjhsYNrGIKH8Ub0UKXFXibHbafSuq7RqyRQzt01Ud8CAtq+w
 P9EftUysLtovGpLSpGDO5zQ++4ZGVygdYFr318aGDqCljKAKZ9hYgRimPBToDedho1S1uE6F
 6YiBFnI3ry9+/KUnEP6L8Sfezwy7fp2JUNkUr41QF76nz43tl7oersrLxHzj2dYfWUAZWXva
 wW4IKF5sOPFMMgxoOJovSWqwh1b7hqI+nDlD3mmVMd20VyE9W7AgTIsvDxWUnMPvww5iExlY
 eIC0Wj9K4UqSYBOHcUPrVOKTcsBVPQA6SAMJlt82/v5l4J0pSQARAQABzSpEYW5pZWwgTGV6
 Y2FubyA8ZGFuaWVsLmxlemNhbm9AbGluYXJvLm9yZz7Cwa4EEwEIAEECGwEFCwkIBwIGFQoJ
 CAsCBBYCAwECHgECF4ACGQEWIQQk1ibyU76eh+bOW/SP9LjScWdVJwUCXAkeagUJDRnjhwAh
 CRCP9LjScWdVJxYhBCTWJvJTvp6H5s5b9I/0uNJxZ1Un69gQAJK0ODuKzYl0TvHPU8W7uOeu
 U7OghN/DTkG6uAkyqW+iIVi320R5QyXN1Tb6vRx6+yZ6mpJRW5S9fO03wcD8Sna9xyZacJfO
 UTnpfUArs9FF1pB3VIr95WwlVoptBOuKLTCNuzoBTW6jQt0sg0uPDAi2dDzf+21t/UuF7I3z
 KSeVyHuOfofonYD85FkQJN8lsbh5xWvsASbgD8bmfI87gEbt0wq2ND5yuX+lJK7FX4lMO6gR
 ZQ75g4KWDprOO/w6ebRxDjrH0lG1qHBiZd0hcPo2wkeYwb1sqZUjQjujlDhcvnZfpDGR4yLz
 5WG+pdciQhl6LNl7lctNhS8Uct17HNdfN7QvAumYw5sUuJ+POIlCws/aVbA5+DpmIfzPx5Ak
 UHxthNIyqZ9O6UHrVg7SaF3rvqrXtjtnu7eZ3cIsfuuHrXBTWDsVwub2nm1ddZZoC530BraS
 d7Y7eyKs7T4mGwpsi3Pd33Je5aC/rDeF44gXRv3UnKtjq2PPjaG/KPG0fLBGvhx0ARBrZLsd
 5CTDjwFA4bo+pD13cVhTfim3dYUnX1UDmqoCISOpzg3S4+QLv1bfbIsZ3KDQQR7y/RSGzcLE
 z164aDfuSvl+6Myb5qQy1HUQ0hOj5Qh+CzF3CMEPmU1v9Qah1ThC8+KkH/HHjPPulLn7aMaK
 Z8t6h7uaAYnGzjMEXZLIEhYJKwYBBAHaRw8BAQdAGdRDglTydmxI03SYiVg95SoLOKT5zZW1
 7Kpt/5zcvt3CwhsEGAEIACAWIQQk1ibyU76eh+bOW/SP9LjScWdVJwUCXZLIEgIbAgCvCRCP
 9LjScWdVJ40gBBkWCAAdFiEEbinX+DPdhovb6oob3uarTi9/eqYFAl2SyBIAIQkQ3uarTi9/
 eqYWIQRuKdf4M92Gi9vqihve5qtOL396pnZGAP0c3VRaj3RBEOUGKxHzcu17ZUnIoJLjpHdk
 NfBnWU9+UgD/bwTxE56Wd8kQZ2e2UTy4BM8907FsJgAQLL4tD2YZggwWIQQk1ibyU76eh+bO
 W/SP9LjScWdVJ5CaD/0YQyfUzjpR1GnCSkbaLYTEUsyaHuWPI/uSpKTtcbttpYv+QmYsIwD9
 8CeH3zwY0Xl/1fE9Hy59z6Vxv9YVapLx0nPDOA1zDVNq2MnutxHb8t+Imjz4ERCxysqtfYrv
 gao3E/h0c8SEeh+bh5MkjwmU8CwZ3doWyiVdULKESe7/Gs5OuhFzaDVPCpWdsKdCAGyUuP/+
 qRWwKGVpWP0Rrt6MTK24Ibeu3xEZO8c3XOEXH5d9nf6YRqBEIizAecoCr00E9c+6BlRS0AqR
 OQC3/Mm7rWtco3+WOridqVXkko9AcZ8AiM5nu0F8AqYGKg0y7vkL2LOP8us85L0p57MqIR1u
 gDnITlTY0x4RYRWJ9+k7led5WsnWlyv84KNzbDqQExTm8itzeZYW9RvbTS63r/+FlcTa9Cz1
 5fW3Qm0BsyECvpAD3IPLvX9jDIR0IkF/BQI4T98LQAkYX1M/UWkMpMYsL8tLObiNOWUl4ahb
 PYi5Yd8zVNYuidXHcwPAUXqGt3Cs+FIhihH30/Oe4jL0/2ZoEnWGOexIFVFpue0jdqJNiIvA
 F5Wpx+UiT5G8CWYYge5DtHI3m5qAP9UgPuck3N8xCihbsXKX4l8bdHfziaJuowief7igeQs/
 WyY9FnZb0tl29dSa7PdDKFWu+B+ZnuIzsO5vWMoN6hMThTl1DxS+jc7ATQRb/8z6AQgAvSkg
 5w7dVCSbpP6nXc+i8OBz59aq8kuL3YpxT9RXE/y45IFUVuSc2kuUj683rEEgyD7XCf4QKzOw
 +XgnJcKFQiACpYAowhF/XNkMPQFspPNM1ChnIL5KWJdTp0DhW+WBeCnyCQ2pzeCzQlS/qfs3
 dMLzzm9qCDrrDh/aEegMMZFO+reIgPZnInAcbHj3xUhz8p2dkExRMTnLry8XXkiMu9WpchHy
 XXWYxXbMnHkSRuT00lUfZAkYpMP7La2UudC/Uw9WqGuAQzTqhvE1kSQe0e11Uc+PqceLRHA2
 bq/wz0cGriUrcCrnkzRmzYLoGXQHqRuZazMZn2/pSIMZdDxLbwARAQABwsGNBBgBCAAgFiEE
 JNYm8lO+nofmzlv0j/S40nFnVScFAlv/zPoCGwwAIQkQj/S40nFnVScWIQQk1ibyU76eh+bO
 W/SP9LjScWdVJ/g6EACFYk+OBS7pV9KZXncBQYjKqk7Kc+9JoygYnOE2wN41QN9Xl0Rk3wri
 qO7PYJM28YjK3gMT8glu1qy+Ll1bjBYWXzlsXrF4szSqkJpm1cCxTmDOne5Pu6376dM9hb4K
 l9giUinI4jNUCbDutlt+Cwh3YuPuDXBAKO8YfDX2arzn/CISJlk0d4lDca4Cv+4yiJpEGd/r
 BVx2lRMUxeWQTz+1gc9ZtbRgpwoXAne4iw3FlR7pyg3NicvR30YrZ+QOiop8psWM2Fb1PKB9
 4vZCGT3j2MwZC50VLfOXC833DBVoLSIoL8PfTcOJOcHRYU9PwKW0wBlJtDVYRZ/CrGFjbp2L
 eT2mP5fcF86YMv0YGWdFNKDCOqOrOkZVmxai65N9d31k8/O9h1QGuVMqCiOTULy/h+FKpv5q
 t35tlzA2nxPOX8Qj3KDDqVgQBMYJRghZyj5+N6EKAbUVa9Zq8xT6Ms2zz/y7CPW74G1GlYWP
 i6D9VoMMi6ICko/CXUZ77OgLtMsy3JtzTRbn/wRySOY2AsMgg0Sw6yJ0wfrVk6XAMoLGjaVt
 X4iPTvwocEhjvrO4eXCicRBocsIB2qZaIj3mlhk2u4AkSpkKm9cN0KWYFUxlENF4/NKWMK+g
 fGfsCsS3cXXiZpufZFGr+GoHwiELqfLEAQ9AhlrHGCKcgVgTOI6NHg==
Message-ID: <687ab83c-6381-57aa-3bc1-3628e27644b5@linaro.org>
Date:   Thu, 20 Feb 2020 11:36:47 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.4.1
MIME-Version: 1.0
In-Reply-To: <20200217134546.14562-4-benjamin.gaignard@st.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 17/02/2020 14:45, Benjamin Gaignard wrote:
> From: Benjamin Gaignard <benjamin.gaignard@linaro.org>
> 
> Implement clock event driver using low power STM32 timers.
> Low power timer counters running even when CPUs are stopped.
> It could be used as clock event broadcaster to wake up CPUs but not like
> a clocksource because each it rise an interrupt the counter restart from 0.
> 
> Low power timers have a 16 bits counter and a prescaler which allow to
> divide the clock per power of 2 to up 128 to target a 32KHz rate.
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
> Signed-off-by: Pascal Paillet <p.paillet@st.com>
> ---
> version 4:
> - move defines in mfd/stm32-lptimer.h
> - change compatiblename
> - reword commit message
> - make driver Kconfig depends of MFD_STM32_LPTIMER
> - remove useless include
> - remove rate and clk fields from the private structure
> - to add comments about the registers sequence in stm32_clkevent_lp_set_timer
> - rework probe function and use devm_request_irq()
> - do not allow module to be removed
> - make sure that wakeup interrupt is set
> 
>  drivers/clocksource/Kconfig          |   7 ++
>  drivers/clocksource/Makefile         |   1 +
>  drivers/clocksource/timer-stm32-lp.c | 213 +++++++++++++++++++++++++++++++++++
>  3 files changed, 221 insertions(+)
>  create mode 100644 drivers/clocksource/timer-stm32-lp.c
> 
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index cc909e465823..9fc2b513db6f 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -292,6 +292,13 @@ config CLKSRC_STM32
>  	select CLKSRC_MMIO
>  	select TIMER_OF
>  
> +config CLKSRC_STM32_LP
> +	bool "Low power clocksource for STM32 SoCs"
> +	depends on MFD_STM32_LPTIMER || COMPILE_TEST
> +	help
> +	  This option enables support for STM32 low power clockevent available
> +	  on STM32 SoCs
> +
>  config CLKSRC_MPS2
>  	bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
>  	depends on GENERIC_SCHED_CLOCK
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 713686faa549..c00fffbd4769 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -44,6 +44,7 @@ obj-$(CONFIG_BCM_KONA_TIMER)	+= bcm_kona_timer.o
>  obj-$(CONFIG_CADENCE_TTC_TIMER)	+= timer-cadence-ttc.o
>  obj-$(CONFIG_CLKSRC_EFM32)	+= timer-efm32.o
>  obj-$(CONFIG_CLKSRC_STM32)	+= timer-stm32.o
> +obj-$(CONFIG_CLKSRC_STM32_LP)	+= timer-stm32-lp.o
>  obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
>  obj-$(CONFIG_CLKSRC_LPC32XX)	+= timer-lpc32xx.o
>  obj-$(CONFIG_CLKSRC_MPS2)	+= mps2-timer.o
> diff --git a/drivers/clocksource/timer-stm32-lp.c b/drivers/clocksource/timer-stm32-lp.c
> new file mode 100644
> index 000000000000..50eecdb88216
> --- /dev/null
> +++ b/drivers/clocksource/timer-stm32-lp.c
> @@ -0,0 +1,213 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
> + * Authors: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
> + *	    Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clockchips.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/stm32-lptimer.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_wakeirq.h>
> +
> +#define CFGR_PSC_OFFSET		9
> +#define STM32_LP_RATING		400
> +#define STM32_TARGET_CLKRATE	(32000 * HZ)
> +#define STM32_LP_MAX_PSC	7
> +
> +struct stm32_lp_private {
> +	struct regmap *reg;
> +	struct clock_event_device clkevt;
> +	unsigned long period;
> +};
> +
> +static struct stm32_lp_private*
> +to_priv(struct clock_event_device *clkevt)
> +{
> +	return container_of(clkevt, struct stm32_lp_private, clkevt);
> +}
> +
> +static int stm32_clkevent_lp_shutdown(struct clock_event_device *clkevt)
> +{
> +	struct stm32_lp_private *priv = to_priv(clkevt);
> +
> +	regmap_write(priv->reg, STM32_LPTIM_CR, 0);
> +	regmap_write(priv->reg, STM32_LPTIM_IER, 0);
> +	/* clear pending flags */
> +	regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
> +
> +	return 0;
> +}
> +
> +static int stm32_clkevent_lp_set_timer(unsigned long evt,
> +				       struct clock_event_device *clkevt,
> +				       int is_periodic)
> +{
> +	struct stm32_lp_private *priv = to_priv(clkevt);
> +
> +	/* disable LPTIMER to be able to write into IER register*/
> +	regmap_write(priv->reg, STM32_LPTIM_CR, 0);
> +	/* enable ARR interrupt */
> +	regmap_write(priv->reg, STM32_LPTIM_IER, STM32_LPTIM_ARRMIE);
> +	/* enable LPTIMER to be able to write into ARR register */
> +	regmap_write(priv->reg, STM32_LPTIM_CR, STM32_LPTIM_ENABLE);
> +	/* set next event counter */
> +	regmap_write(priv->reg, STM32_LPTIM_ARR, evt);
> +
> +	/* start counter */
> +	if (is_periodic)
> +		regmap_write(priv->reg, STM32_LPTIM_CR,
> +			     STM32_LPTIM_CNTSTRT | STM32_LPTIM_ENABLE);
> +	else
> +		regmap_write(priv->reg, STM32_LPTIM_CR,
> +			     STM32_LPTIM_SNGSTRT | STM32_LPTIM_ENABLE);

The regmap config in stm32-lptimer is not defined with the fast_io flag
(on purpose or not?) that means we can potentially deadlock here as the
lock is a mutex.

Isn't it detected with the lock validation scheme?

> +	return 0;
> +}
> +static int stm32_clkevent_lp_remove(struct platform_device *pdev)
> +{
> +	return -EBUSY; /* cannot unregister clockevent */
> +}

Won't be the mfd into an inconsistent state here? The other subsystems
will be removed but this one will prevent to unload the module leading
to a situation where the mfd is partially removed but still there
without a possible recovery, no?

> +static const struct of_device_id stm32_clkevent_lp_of_match[] = {
> +	{ .compatible = "st,stm32-lptimer-timer", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, stm32_clkevent_lp_of_match);
> +
> +static struct platform_driver stm32_clkevent_lp_driver = {
> +	.probe	= stm32_clkevent_lp_probe,
> +	.remove = stm32_clkevent_lp_remove,
> +	.driver	= {
> +		.name = "stm32-lptimer-timer",
> +		.of_match_table = of_match_ptr(stm32_clkevent_lp_of_match),
> +	},
> +};


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog