Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Thara Gopinath <thara.gopinath@linaro.org>
To:     mingo@redhat.com, peterz@infradead.org, ionela.voinescu@arm.com,
        vincent.guittot@linaro.org, dietmar.eggemann@arm.com,
        rui.zhang@intel.com, qperret@google.com, daniel.lezcano@linaro.org,
        viresh.kumar@linaro.org, rostedt@goodmis.org, will@kernel.org,
        catalin.marinas@arm.com, sudeep.holla@arm.com,
        juri.lelli@redhat.com, corbet@lwn.net
Cc:     linux-kernel@vger.kernel.org, amit.kachhap@gmail.com,
        javi.merino@kernel.org, amit.kucheria@verdurent.com
Subject: [Patch v10 1/9] sched/pelt: Add support to track thermal pressure
Date:   Fri, 21 Feb 2020 19:52:05 -0500
Message-Id: <20200222005213.3873-2-thara.gopinath@linaro.org>
In-Reply-To: <20200222005213.3873-1-thara.gopinath@linaro.org>
References: <20200222005213.3873-1-thara.gopinath@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Extrapolating on the existing framework to track rt/dl utilization using
pelt signals, add a similar mechanism to track thermal pressure. The
difference here from rt/dl utilization tracking is that, instead of
tracking time spent by a cpu running a rt/dl task through util_avg, the
average thermal pressure is tracked through load_avg. This is because
thermal pressure signal is weighted time "delta" capacity unlike util_avg
which is binary. "delta capacity" here means delta between the actual
capacity of a cpu and the decreased capacity a cpu due to a thermal event.

In order to track average thermal pressure, a new sched_avg variable
avg_thermal is introduced. Function update_thermal_load_avg can be called
to do the periodic bookkeeping (accumulate, decay and average) of the
thermal pressure.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
---
v6->v7:
	- Added CONFIG_HAVE_SCHED_THERMAL_PRESSURE to stub out
	  update_thermal_load_avg in unsupported architectures as per
	  review comments from Peter, Dietmar and Quentin.
	- Updated comment for update_thermal_load_avg as per review
	  comments from Peter and Dietmar.
v7->v8:
	- Fixed typo in defining update_thermal_load_avg which was
	  causing build errors (reported by kbuild test report)
v8->v9:
	- Defined thermal_load_avg to read rq->avg_thermal.load_avg and
	  avoid cacheline miss in unsupported cases as per Peter's
          suggestion.
v9->v10:
	- Fixed typos in comments as per Amit Kucheria's review comments.

 include/trace/events/sched.h |  4 ++++
 init/Kconfig                 |  4 ++++
 kernel/sched/pelt.c          | 31 +++++++++++++++++++++++++++++++
 kernel/sched/pelt.h          | 31 +++++++++++++++++++++++++++++++
 kernel/sched/sched.h         |  3 +++
 5 files changed, 73 insertions(+)

diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index 420e80e56e55..a8fb667c669e 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -613,6 +613,10 @@ DECLARE_TRACE(pelt_dl_tp,
 	TP_PROTO(struct rq *rq),
 	TP_ARGS(rq));
 
+DECLARE_TRACE(pelt_thermal_tp,
+	TP_PROTO(struct rq *rq),
+	TP_ARGS(rq));
+
 DECLARE_TRACE(pelt_irq_tp,
 	TP_PROTO(struct rq *rq),
 	TP_ARGS(rq));
diff --git a/init/Kconfig b/init/Kconfig
index 2a25c769eaaa..8d56902efa70 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -464,6 +464,10 @@ config HAVE_SCHED_AVG_IRQ
 	depends on IRQ_TIME_ACCOUNTING || PARAVIRT_TIME_ACCOUNTING
 	depends on SMP
 
+config HAVE_SCHED_THERMAL_PRESSURE
+	bool "Enable periodic averaging of thermal pressure"
+	depends on SMP
+
 config BSD_PROCESS_ACCT
 	bool "BSD Process Accounting"
 	depends on MULTIUSER
diff --git a/kernel/sched/pelt.c b/kernel/sched/pelt.c
index bd006b79b360..1fdacbf6fb44 100644
--- a/kernel/sched/pelt.c
+++ b/kernel/sched/pelt.c
@@ -367,6 +367,37 @@ int update_dl_rq_load_avg(u64 now, struct rq *rq, int running)
 	return 0;
 }
 
+#ifdef CONFIG_HAVE_SCHED_THERMAL_PRESSURE
+/*
+ * thermal:
+ *
+ *   load_sum = \Sum se->avg.load_sum but se->avg.load_sum is not tracked
+ *
+ *   util_avg and runnable_load_avg are not supported and meaningless.
+ *
+ * Unlike rt/dl utilization tracking that track time spent by a cpu
+ * running a rt/dl task through util_avg, the average thermal pressure is
+ * tracked through load_avg. This is because thermal pressure signal is
+ * time weighted "delta" capacity unlike util_avg which is binary.
+ * "delta capacity" =  actual capacity  -
+ *			capped capacity a cpu due to a thermal event.
+ */
+
+int update_thermal_load_avg(u64 now, struct rq *rq, u64 capacity)
+{
+	if (___update_load_sum(now, &rq->avg_thermal,
+			       capacity,
+			       capacity,
+			       capacity)) {
+		___update_load_avg(&rq->avg_thermal, 1, 1);
+		trace_pelt_thermal_tp(rq);
+		return 1;
+	}
+
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_HAVE_SCHED_AVG_IRQ
 /*
  * irq:
diff --git a/kernel/sched/pelt.h b/kernel/sched/pelt.h
index afff644da065..916979a54782 100644
--- a/kernel/sched/pelt.h
+++ b/kernel/sched/pelt.h
@@ -7,6 +7,26 @@ int __update_load_avg_cfs_rq(u64 now, struct cfs_rq *cfs_rq);
 int update_rt_rq_load_avg(u64 now, struct rq *rq, int running);
 int update_dl_rq_load_avg(u64 now, struct rq *rq, int running);
 
+#ifdef CONFIG_HAVE_SCHED_THERMAL_PRESSURE
+int update_thermal_load_avg(u64 now, struct rq *rq, u64 capacity);
+
+static inline u64 thermal_load_avg(struct rq *rq)
+{
+	return READ_ONCE(rq->avg_thermal.load_avg);
+}
+#else
+static inline int
+update_thermal_load_avg(u64 now, struct rq *rq, u64 capacity)
+{
+	return 0;
+}
+
+static inline u64 thermal_load_avg(struct rq *rq)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_HAVE_SCHED_AVG_IRQ
 int update_irq_load_avg(struct rq *rq, u64 running);
 #else
@@ -158,6 +178,17 @@ update_dl_rq_load_avg(u64 now, struct rq *rq, int running)
 	return 0;
 }
 
+static inline int
+update_thermal_load_avg(u64 now, struct rq *rq, u64 capacity)
+{
+	return 0;
+}
+
+static inline u64 thermal_load_avg(struct rq *rq)
+{
+	return 0;
+}
+
 static inline int
 update_irq_load_avg(struct rq *rq, u64 running)
 {
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 12bf82d86156..211411ac0efa 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -943,6 +943,9 @@ struct rq {
 	struct sched_avg	avg_dl;
 #ifdef CONFIG_HAVE_SCHED_AVG_IRQ
 	struct sched_avg	avg_irq;
+#endif
+#ifdef CONFIG_HAVE_SCHED_THERMAL_PRESSURE
+	struct sched_avg	avg_thermal;
 #endif
 	u64			idle_stamp;
 	u64			avg_idle;
-- 
2.20.1