Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Andre Przywara <andre.przywara@arm.com>
To:     Rob Herring <robh@kernel.org>,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org
Cc:     Maxime Ripard <mripard@kernel.org>,
        Robert Richter <rric@kernel.org>, soc@kernel.org,
        Jon Loeliger <jdl@jdl.com>,
        Mark Langsdorf <mlangsdo@redhat.com>,
        Eric Auger <eric.auger@redhat.com>,
        Will Deacon <will@kernel.org>,
        Catalin Marinas <catalin.marinas@arm.com>
Subject: [PATCH v2 02/13] arm: dts: calxeda: Provide UART clock
Date:   Thu, 27 Feb 2020 18:21:59 +0000
Message-Id: <20200227182210.89512-3-andre.przywara@arm.com>
In-Reply-To: <20200227182210.89512-1-andre.przywara@arm.com>
References: <20200227182210.89512-1-andre.przywara@arm.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The PL011 UART binding requires two clocks to be named in a node.
Add the second clock, which is the bus gate, that just gets enabled.
Since this is a fixed clock anyway, it doesn't make any difference.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm/boot/dts/ecx-common.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index 66ee1d34f72b..f819e3328a9e 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -114,8 +114,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xfff36000 0x1000>;
 			interrupts = <0 20 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
+			clocks = <&pclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		smic@fff3a000 {
-- 
2.17.1