Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030434AbWBNFW4 (ORCPT ); Tue, 14 Feb 2006 00:22:56 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1030471AbWBNFW2 (ORCPT ); Tue, 14 Feb 2006 00:22:28 -0500 Received: from ns.miraclelinux.com ([219.118.163.66]:7887 "EHLO mail01.miraclelinux.com") by vger.kernel.org with ESMTP id S1030361AbWBNFFA (ORCPT ); Tue, 14 Feb 2006 00:05:00 -0500 Message-Id: <20060214050442.899865000@localhost.localdomain> References: <20060214050351.252615000@localhost.localdomain> Date: Tue, 14 Feb 2006 14:03:57 +0900 From: Akinobu Mita To: linux-kernel@vger.kernel.org Cc: akpm@osdl.org, Chris Zankel , Keith Owens , Akinobu Mita Subject: [patch 06/47] generic {,test_and_}{set,clear,change}_bit() Content-Disposition: inline; filename=atomic-bitops.patch Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7084 Lines: 224 This patch introduces the C-language equivalents of the functions below: void set_bit(int nr, volatile unsigned long *addr); void clear_bit(int nr, volatile unsigned long *addr); void change_bit(int nr, volatile unsigned long *addr); int test_and_set_bit(int nr, volatile unsigned long *addr); int test_and_clear_bit(int nr, volatile unsigned long *addr); int test_and_change_bit(int nr, volatile unsigned long *addr); In include/asm-generic/bitops/atomic.h This code largely copied from: include/asm-powerpc/bitops.h include/asm-parisc/bitops.h include/asm-parisc/atomic.h Signed-off-by: Akinobu Mita include/asm-generic/bitops/atomic.h | 191 ++++++++++++++++++++++++++++++++++++ 1 files changed, 191 insertions(+) Index: 2.6-rc/include/asm-generic/bitops/atomic.h =================================================================== --- /dev/null +++ 2.6-rc/include/asm-generic/bitops/atomic.h @@ -0,0 +1,191 @@ +#ifndef _ASM_GENERIC_BITOPS_ATOMIC_H_ +#define _ASM_GENERIC_BITOPS_ATOMIC_H_ + +#include + +#define BITOP_MASK(nr) (1UL << ((nr) % BITS_PER_LONG)) +#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) + +#ifdef CONFIG_SMP +#include +#include /* we use L1_CACHE_BYTES */ + +/* Use an array of spinlocks for our atomic_ts. + * Hash function to index into a different SPINLOCK. + * Since "a" is usually an address, use one spinlock per cacheline. + */ +# define ATOMIC_HASH_SIZE 4 +# define ATOMIC_HASH(a) (&(__atomic_hash[ (((unsigned long) a)/L1_CACHE_BYTES) & (ATOMIC_HASH_SIZE-1) ])) + +extern raw_spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned; + +/* Can't use raw_spin_lock_irq because of #include problems, so + * this is the substitute */ +#define _atomic_spin_lock_irqsave(l,f) do { \ + raw_spinlock_t *s = ATOMIC_HASH(l); \ + local_irq_save(f); \ + __raw_spin_lock(s); \ +} while(0) + +#define _atomic_spin_unlock_irqrestore(l,f) do { \ + raw_spinlock_t *s = ATOMIC_HASH(l); \ + __raw_spin_unlock(s); \ + local_irq_restore(f); \ +} while(0) + + +#else +# define _atomic_spin_lock_irqsave(l,f) do { local_irq_save(f); } while (0) +# define _atomic_spin_unlock_irqrestore(l,f) do { local_irq_restore(f); } while (0) +#endif + +/* + * NMI events can occur at any time, including when interrupts have been + * disabled by *_irqsave(). So you can get NMI events occurring while a + * *_bit fucntion is holding a spin lock. If the NMI handler also wants + * to do bit manipulation (and they do) then you can get a deadlock + * between the original caller of *_bit() and the NMI handler. + * + * by Keith Owens + */ + +/** + * set_bit - Atomically set a bit in memory + * @nr: the bit to set + * @addr: the address to start counting from + * + * This function is atomic and may not be reordered. See __set_bit() + * if you do not require the atomic guarantees. + * + * Note: there are no guarantees that this function will not be reordered + * on non x86 architectures, so if you are writting portable code, + * make sure not to rely on its reordering guarantees. + * + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void set_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + unsigned long flags; + + _atomic_spin_lock_irqsave(p, flags); + *p |= mask; + _atomic_spin_unlock_irqrestore(p, flags); +} + +/** + * clear_bit - Clears a bit in memory + * @nr: Bit to clear + * @addr: Address to start counting from + * + * clear_bit() is atomic and may not be reordered. However, it does + * not contain a memory barrier, so if it is used for locking purposes, + * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * in order to ensure changes are visible on other processors. + */ +static inline void clear_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + unsigned long flags; + + _atomic_spin_lock_irqsave(p, flags); + *p &= ~mask; + _atomic_spin_unlock_irqrestore(p, flags); +} + +/** + * change_bit - Toggle a bit in memory + * @nr: Bit to change + * @addr: Address to start counting from + * + * change_bit() is atomic and may not be reordered. It may be + * reordered on other architectures than x86. + * Note that @nr may be almost arbitrarily large; this function is not + * restricted to acting on a single-word quantity. + */ +static inline void change_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + unsigned long flags; + + _atomic_spin_lock_irqsave(p, flags); + *p ^= mask; + _atomic_spin_unlock_irqrestore(p, flags); +} + +/** + * test_and_set_bit - Set a bit and return its old value + * @nr: Bit to set + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It may be reordered on other architectures than x86. + * It also implies a memory barrier. + */ +static inline int test_and_set_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + unsigned long old; + unsigned long flags; + + _atomic_spin_lock_irqsave(p, flags); + old = *p; + *p = old | mask; + _atomic_spin_unlock_irqrestore(p, flags); + + return (old & mask) != 0; +} + +/** + * test_and_clear_bit - Clear a bit and return its old value + * @nr: Bit to clear + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It can be reorderdered on other architectures other than x86. + * It also implies a memory barrier. + */ +static inline int test_and_clear_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + unsigned long old; + unsigned long flags; + + _atomic_spin_lock_irqsave(p, flags); + old = *p; + *p = old & ~mask; + _atomic_spin_unlock_irqrestore(p, flags); + + return (old & mask) != 0; +} + +/** + * test_and_change_bit - Change a bit and return its old value + * @nr: Bit to change + * @addr: Address to count from + * + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. + */ +static inline int test_and_change_bit(int nr, volatile unsigned long *addr) +{ + unsigned long mask = BITOP_MASK(nr); + unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); + unsigned long old; + unsigned long flags; + + _atomic_spin_lock_irqsave(p, flags); + old = *p; + *p = old ^ mask; + _atomic_spin_unlock_irqrestore(p, flags); + + return (old & mask) != 0; +} + +#endif /* _ASM_GENERIC_BITOPS_ATOMIC_H */ -- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/