Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH v6 3/3] arm64: dts: meson: add support for the SmartLabs
 SML-5442TW
To:     Christian Hewitt <christianshewitt@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Kevin Hilman <khilman@baylibre.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     =?UTF-8?Q?Andreas_F=c3=a4rber?= <afaerber@suse.de>,
        =?UTF-8?Q?Jer=c3=b4me_Brunet?= <jbrunet@baylibre.com>
References: <1583036241-88937-1-git-send-email-christianshewitt@gmail.com>
 <1583036241-88937-4-git-send-email-christianshewitt@gmail.com>
From:   Neil Armstrong <narmstrong@baylibre.com>
Autocrypt: addr=narmstrong@baylibre.com; prefer-encrypt=mutual; keydata=
 xsBNBE1ZBs8BCAD78xVLsXPwV/2qQx2FaO/7mhWL0Qodw8UcQJnkrWmgTFRobtTWxuRx8WWP
 GTjuhvbleoQ5Cxjr+v+1ARGCH46MxFP5DwauzPekwJUD5QKZlaw/bURTLmS2id5wWi3lqVH4
 BVF2WzvGyyeV1o4RTCYDnZ9VLLylJ9bneEaIs/7cjCEbipGGFlfIML3sfqnIvMAxIMZrvcl9
 qPV2k+KQ7q+aXavU5W+yLNn7QtXUB530Zlk/d2ETgzQ5FLYYnUDAaRl+8JUTjc0CNOTpCeik
 80TZcE6f8M76Xa6yU8VcNko94Ck7iB4vj70q76P/J7kt98hklrr85/3NU3oti3nrIHmHABEB
 AAHNKE5laWwgQXJtc3Ryb25nIDxuYXJtc3Ryb25nQGJheWxpYnJlLmNvbT7CwHsEEwEKACUC
 GyMGCwkIBwMCBhUIAgkKCwQWAgMBAh4BAheABQJXDO2CAhkBAAoJEBaat7Gkz/iubGIH/iyk
 RqvgB62oKOFlgOTYCMkYpm2aAOZZLf6VKHKc7DoVwuUkjHfIRXdslbrxi4pk5VKU6ZP9AKsN
 NtMZntB8WrBTtkAZfZbTF7850uwd3eU5cN/7N1Q6g0JQihE7w4GlIkEpQ8vwSg5W7hkx3yQ6
 2YzrUZh/b7QThXbNZ7xOeSEms014QXazx8+txR7jrGF3dYxBsCkotO/8DNtZ1R+aUvRfpKg5
 ZgABTC0LmAQnuUUf2PHcKFAHZo5KrdO+tyfL+LgTUXIXkK+tenkLsAJ0cagz1EZ5gntuheLD
 YJuzS4zN+1Asmb9kVKxhjSQOcIh6g2tw7vaYJgL/OzJtZi6JlIXOwU0EVid/pAEQAND7AFhr
 5faf/EhDP9FSgYd/zgmb7JOpFPje3uw7jz9wFb28Cf0Y3CcncdElYoBNbRlesKvjQRL8mozV
 9RN+IUMHdUx1akR/A4BPXNdL7StfzKWOCxZHVS+rIQ/fE3Qz/jRmT6t2ZkpplLxVBpdu95qJ
 YwSZjuwFXdC+A7MHtQXYi3UfCgKiflj4+/ITcKC6EF32KrmIRqamQwiRsDcUUKlAUjkCLcHL
 CQvNsDdm2cxdHxC32AVm3Je8VCsH7/qEPMQ+cEZk47HOR3+Ihfn1LEG5LfwsyWE8/JxsU2a1
 q44LQM2lcK/0AKAL20XDd7ERH/FCBKkNVzi+svYJpyvCZCnWT0TRb72mT+XxLWNwfHTeGALE
 +1As4jIS72IglvbtONxc2OIid3tR5rX3k2V0iud0P7Hnz/JTdfvSpVj55ZurOl2XAXUpGbq5
 XRk5CESFuLQV8oqCxgWAEgFyEapI4GwJsvfl/2Er8kLoucYO1Id4mz6N33+omPhaoXfHyLSy
 dxD+CzNJqN2GdavGtobdvv/2V0wukqj86iKF8toLG2/Fia3DxMaGUxqI7GMOuiGZjXPt/et/
 qeOySghdQ7Sdpu6fWc8CJXV2mOV6DrSzc6ZVB4SmvdoruBHWWOR6YnMz01ShFE49pPucyU1h
 Av4jC62El3pdCrDOnWNFMYbbon3vABEBAAHCwn4EGAECAAkFAlYnf6QCGwICKQkQFpq3saTP
 +K7BXSAEGQECAAYFAlYnf6QACgkQd9zb2sjISdGToxAAkOjSfGxp0ulgHboUAtmxaU3viucV
 e2Hl1BVDtKSKmbIVZmEUvx9D06IijFaEzqtKD34LXD6fjl4HIyDZvwfeaZCbJbO10j3k7FJE
 QrBtpdVqkJxme/nYlGOVzcOiKIepNkwvnHVnuVDVPcXyj2wqtsU7VZDDX41z3X4xTQwY3SO1
 9nRO+f+i4RmtJcITgregMa2PcB0LvrjJlWroI+KAKCzoTHzSTpCXMJ1U/dEqyc87bFBdc+DI
 k8mWkPxsccdbs4t+hH0NoE3Kal9xtAl56RCtO/KgBLAQ5M8oToJVatxAjO1SnRYVN1EaAwrR
 xkHdd97qw6nbg9BMcAoa2NMc0/9MeiaQfbgW6b0reIz/haHhXZ6oYSCl15Knkr4t1o3I2Bqr
 Mw623gdiTzotgtId8VfLB2Vsatj35OqIn5lVbi2ua6I0gkI6S7xJhqeyrfhDNgzTHdQVHB9/
 7jnM0ERXNy1Ket6aDWZWCvM59dTyu37g3VvYzGis8XzrX1oLBU/tTXqo1IFqqIAmvh7lI0Se
 gCrXz7UanxCwUbQBFjzGn6pooEHJYRLuVGLdBuoApl/I4dLqCZij2AGa4CFzrn9W0cwm3HCO
 lR43gFyz0dSkMwNUd195FrvfAz7Bjmmi19DnORKnQmlvGe/9xEEfr5zjey1N9+mt3//geDP6
 clwKBkq0JggA+RTEAELzkgPYKJ3NutoStUAKZGiLOFMpHY6KpItbbHjF2ZKIU1whaRYkHpB2
 uLQXOzZ0d7x60PUdhqG3VmFnzXSztA4vsnDKk7x2xw0pMSTKhMafpxaPQJf494/jGnwBHyi3
 h3QGG1RjfhQ/OMTX/HKtAUB2ct3Q8/jBfF0hS5GzT6dYtj0Ci7+8LUsB2VoayhNXMnaBfh+Q
 pAhaFfRZWTjUFIV4MpDdFDame7PB50s73gF/pfQbjw5Wxtes/0FnqydfId95s+eej+17ldGp
 lMv1ok7K0H/WJSdr7UwDAHEYU++p4RRTJP6DHWXcByVlpNQ4SSAiivmWiwOt490+Ac7ATQRN
 WQbPAQgAvIoM384ZRFocFXPCOBir5m2J+96R2tI2XxMgMfyDXGJwFilBNs+fpttJlt2995A8
 0JwPj8SFdm6FBcxygmxBBCc7i/BVQuY8aC0Z/w9Vzt3Eo561r6pSHr5JGHe8hwBQUcNPd/9l
 2ynP57YTSE9XaGJK8gIuTXWo7pzIkTXfN40Wh5jeCCspj4jNsWiYhljjIbrEj300g8RUT2U0
 FcEoiV7AjJWWQ5pi8lZJX6nmB0lc69Jw03V6mblgeZ/1oTZmOepkagwy2zLDXxihf0GowUif
 GphBDeP8elWBNK+ajl5rmpAMNRoKxpN/xR4NzBg62AjyIvigdywa1RehSTfccQARAQABwsBf
 BBgBAgAJBQJNWQbPAhsMAAoJEBaat7Gkz/iuteIH+wZuRDqK0ysAh+czshtG6JJlLW6eXJJR
 Vi7dIPpgFic2LcbkSlvB8E25Pcfz/+tW+04Urg4PxxFiTFdFCZO+prfd4Mge7/OvUcwoSub7
 ZIPo8726ZF5/xXzajahoIu9/hZ4iywWPAHRvprXaim5E/vKjcTeBMJIqZtS4u/UK3EpAX59R
 XVxVpM8zJPbk535ELUr6I5HQXnihQm8l6rt9TNuf8p2WEDxc8bPAZHLjNyw9a/CdeB97m2Tr
 zR8QplXA5kogS4kLe/7/JmlDMO8Zgm9vKLHSUeesLOrjdZ59EcjldNNBszRZQgEhwaarfz46
 BSwxi7g3Mu7u5kUByanqHyA=
Organization: Baylibre
Message-ID: <71666393-43c8-6ddf-5efb-05f418d68866@baylibre.com>
Date:   Tue, 3 Mar 2020 15:46:59 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.4.1
MIME-Version: 1.0
In-Reply-To: <1583036241-88937-4-git-send-email-christianshewitt@gmail.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

On 01/03/2020 05:17, Christian Hewitt wrote:
> The SmartLabs SML-5442TW is broadly similar to the P231 reference design
> but with the following differences:
> 
> - The Yellow and Blue LEDs are available but disabled
> - The Red and Green LEDs are used to signal off/on status
> - uart_AO can be accessed after opening the case; soldered pins exist
> - GPIOX_17 is forced high to enable the QCA9377 module
> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile               |   1 +
>  .../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 292 +++++++++++++++++++++
>  2 files changed, 293 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index eef0045..6cf8c4a 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-sml5442tw.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
> new file mode 100644
> index 0000000..5fdf1ca
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
> @@ -0,0 +1,292 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + * Copyright (c) 2018 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-gxl-s905d.dtsi"
> +
> +/ {
> +	compatible = "smartlabs,sml5442tw", "amlogic,s905d",
> +		"amlogic,meson-gxl";
> +	model = "SmartLabs SML-5442TW";
> +
> +	aliases {
> +		serial0 = &uart_AO;
> +		serial1 = &uart_A;
> +		ethernet0 = &ethmac;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x0 0x0 0x80000000>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		yellow {
> +			label = "sml5442tw:yellow";


The bindings of leds has changed, now you should use function and color ids as described in Documentation/devicetree/bindings/leds/common.yaml

> +			gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		blue {
> +			label = "sml5442tw:blue";
> +			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		green {
> +			label = "sml5442tw:green";
> +			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
> +			default-state = "on";
> +		};
> +
> +		red {
> +			label = "sml5442tw:red";
> +			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +	};
> +
> +	hdmi_5v: regulator-hdmi-5v {
> +		compatible = "regulator-fixed";
> +
> +		regulator-name = "HDMI_5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +
> +		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +
> +	vddio_ao18: regulator-vddio_ao18 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDIO_AO18";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	vddio_boot: regulator-vddio_boot {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDIO_BOOT";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	vddao_3v3: regulator-vddao_3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDAO_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	vcc_3v3: regulator-vcc_3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	emmc_pwrseq: emmc-pwrseq {
> +		compatible = "mmc-pwrseq-emmc";
> +		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	wifi32k: wifi32k {
> +		compatible = "pwm-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> +		clocks = <&wifi32k>;
> +		clock-names = "ext_clock";
> +	};
> +
> +	cvbs-connector {
> +		compatible = "composite-video-connector";
> +
> +		port {
> +			cvbs_connector_in: endpoint {
> +				remote-endpoint = <&cvbs_vdac_out>;
> +			};
> +		};
> +	};
> +
> +	hdmi-connector {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_connector_in: endpoint {
> +				remote-endpoint = <&hdmi_tx_tmds_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&cec_AO {
> +	status = "okay";
> +	pinctrl-0 = <&ao_cec_pins>;
> +	pinctrl-names = "default";
> +	hdmi-phandle = <&hdmi_tx>;
> +};
> +
> +&cvbs_vdac_port {
> +	cvbs_vdac_out: endpoint {
> +		remote-endpoint = <&cvbs_connector_in>;
> +	};
> +};
> +
> +&ethmac {
> +	status = "okay";
> +	phy-mode = "rmii";
> +	phy-handle = <&internal_phy>;
> +};
> +
> +/* This will enable the bluetooth module */
> +&gpio {
> +	bt-en {
> +		gpio-hog;
> +		gpios = <GPIOX_17 GPIO_ACTIVE_HIGH>;
> +		output-high;
> +		line-name = "bt-en";
> +	};
> +};

Did you try using the qcom,qca6174-bt compatible similar to the broadcom BT module as
described in Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt ?

> +
> +&hdmi_tx {
> +	status = "okay";
> +	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> +	pinctrl-names = "default";
> +	hdmi-supply = <&hdmi_5v>;
> +};
> +
> +&hdmi_tx_tmds_port {
> +	hdmi_tx_tmds_out: endpoint {
> +		remote-endpoint = <&hdmi_connector_in>;
> +	};
> +};
> +
> +&i2c_A {
> +	status = "okay";
> +	pinctrl-0 = <&i2c_a_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&internal_phy {
> +	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&ir {
> +	status = "okay";
> +	pinctrl-0 = <&remote_input_ao_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&pwm_ef {
> +	status = "okay";
> +	pinctrl-0 = <&pwm_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&clkc CLKID_FCLK_DIV4>;
> +	clock-names = "clkin0";
> +};
> +
> +&saradc {
> +	status = "okay";
> +	vref-supply = <&vddio_ao18>;
> +};
> +
> +/* Wireless SDIO Module */
> +&sd_emmc_a {
> +	status = "okay";
> +	pinctrl-0 = <&sdio_pins>;
> +	pinctrl-1 = <&sdio_clk_gate_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	max-frequency = <100000000>;
> +
> +	non-removable;
> +	disable-wp;
> +
> +	mmc-pwrseq = <&sdio_pwrseq>;
> +
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> +	status = "okay";
> +	pinctrl-0 = <&sdcard_pins>;
> +	pinctrl-1 = <&sdcard_clk_gate_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	max-frequency = <100000000>;
> +	disable-wp;
> +
> +	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
> +	cd-inverted;
> +
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> +	status = "okay";
> +	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
> +	pinctrl-1 = <&emmc_clk_gate_pins>;
> +	pinctrl-names = "default", "clk-gate";
> +
> +	bus-width = <8>;
> +	cap-mmc-highspeed;
> +	max-frequency = <100000000>;
> +	non-removable;
> +	disable-wp;
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
> +
> +	mmc-pwrseq = <&emmc_pwrseq>;
> +	vmmc-supply = <&vcc_3v3>;
> +	vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* This is connected to the Bluetooth module: */
> +&uart_A {
> +	status = "okay";
> +	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> +	pinctrl-names = "default";
> +	uart-has-rtscts;
> +};
> +
> +/* This UART is brought out to the debug header */
> +&uart_AO {
> +	status = "okay";
> +	pinctrl-0 = <&uart_ao_a_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&usb0 {
> +	status = "okay";
> +};
> 

Neil