Received: by 2002:a25:c205:0:0:0:0:0 with SMTP id s5csp3481004ybf; Tue, 3 Mar 2020 06:47:53 -0800 (PST) X-Google-Smtp-Source: ADFU+vvYEkxijUncKVoCLflOur4mqnM3LCX0pJIRjY6e0k849V6j6qK2KiG9Mk2GPtNvUUZPxxsa X-Received: by 2002:a9d:2028:: with SMTP id n37mr3760334ota.127.1583246873047; Tue, 03 Mar 2020 06:47:53 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1583246873; cv=none; d=google.com; s=arc-20160816; b=jO2yi+hhtVNsAfMxtLRKCc8lTLPKGRD+8AvK5T2sWvxnn9donIERdXLkgSbSmjhazC a6gE2vceUwUOuWDILukR84OrryEY7CedGbgzP5nrOFOpvEGWwRZZF6JqMZWV9V37gv8z kOl4OOc+CDy6ae6k5Bgm/n3Fa62uEAZJuPXD1mmj+AWPAvDnQSJmApukHOmN4NhCBQOK 1V2mqs7L1M+6nAXoeOGm8eZHSoiISrlCw3Wz9udV/l3GYfElpEeKKMhnk1qFpLRMJkte ID4jXGHb2M0YqHuGisH9lK95cY8LazTOMVmMdsPwo17BfjJG6JXcWJ5xU0HhJm1CfUlj XCtA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding :content-language:in-reply-to:mime-version:user-agent:date :message-id:organization:autocrypt:from:references:cc:to:subject :dkim-signature; bh=YlXpdgCgCxVLbA0DWJljFI84zXiu8Z8tgW6virKJ4Wk=; b=oPUgDEM1/G/dn7vsoocP0wvPg7VitqdM8V9SiUUv4bcT72fkv3K+sQwegVO3xygsME gXU8xiQ0yiMXC16eILC9/YLerCdOhOok8e9RKGzBN6JswHILabw83N+1sqSe/p749dA0 ObQoW2bFc/6oZBhyf/FSGknYWlP24EMXfLr70ELRgAipZfics6l8shQWaeOho7auGlW7 mWfM86kHvFpOJ8pqbeHN61zSujLwRJccOppDQIlDwLel4MRrM4sbPUdHQIo4lXUy/wdW sFm85AsrBWbKiX057SsZE0SKXKc7Xw2gHbchokttnDuZD5zhzKFKDVcXsL7tdcUSOKUh y4vA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@baylibre-com.20150623.gappssmtp.com header.s=20150623 header.b=iYf79LP+; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id a15si1516545otr.85.2020.03.03.06.47.41; Tue, 03 Mar 2020 06:47:53 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@baylibre-com.20150623.gappssmtp.com header.s=20150623 header.b=iYf79LP+; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729730AbgCCOrD (ORCPT + 99 others); Tue, 3 Mar 2020 09:47:03 -0500 Received: from mail-wr1-f65.google.com ([209.85.221.65]:38792 "EHLO mail-wr1-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729372AbgCCOrC (ORCPT ); Tue, 3 Mar 2020 09:47:02 -0500 Received: by mail-wr1-f65.google.com with SMTP id t11so4675680wrw.5 for ; Tue, 03 Mar 2020 06:46:58 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20150623.gappssmtp.com; s=20150623; h=subject:to:cc:references:from:autocrypt:organization:message-id :date:user-agent:mime-version:in-reply-to:content-language :content-transfer-encoding; bh=YlXpdgCgCxVLbA0DWJljFI84zXiu8Z8tgW6virKJ4Wk=; b=iYf79LP++ES4zBL+18dxHew7hPg1bIQ51mQWazVrzMt61tlkZ9TdL5Uq5oqfFl3oNf oyrQOXdycmXUk6cIxcKy1fxxTC8NJbF4UEGfzQwfFPTCkiRCIEBtcWbwvoLqrRkE+b1i AsAkIycsx/bW718h09BbrcCXlrRAyiuGPDO5iGWxYqlZuKS5ioLD84lHc1pKLqSBUvKj m6sIdb+IjdsiIpEEIa++UoIL9che0Hg403sO713dZOKcMgbEckFrW0wNWCIT55THbvBd yTw/280159Kleewia3ifO+j5ywrtR3XuvVIx/WU46iSeLAUKuTQyInuO8UoBp6Inoj8O tQUg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:subject:to:cc:references:from:autocrypt :organization:message-id:date:user-agent:mime-version:in-reply-to :content-language:content-transfer-encoding; bh=YlXpdgCgCxVLbA0DWJljFI84zXiu8Z8tgW6virKJ4Wk=; b=gm0JNMYmSAZP5xzkJyejoTDtHW5HUAhrsskLuNI6wW5rtSMRgN1W3M0BAVyZnAAzue u6ptbioVoy0QCR5U8icuKutkk35OnYZm937QYYWKD87snuAX9yr2YDpEkP6n5qJ3+zYu 451sH6WoHCQKj/rNYLUeJ8y+oeAhgQ1kuZ6q54P7pydExiE6cZcIdclcVDJbq3WKqrZO zCt+GrwsajjrZTsF5XGPTHmNmz3yalWv+PItCF76PaFeRFmkZcOd7FuuobVShldTslcz dKA6STnZ1/f7WH5Kt6wnmdZ17103jKQBnjIqVgk5OfLG0RYuV+2U7UFN3XgzqXASBFqU 0lMw== X-Gm-Message-State: ANhLgQ21IMpi+maCGHy2jjAN8+cXOkj/29i3SS8OQP3E0hO3VnmjTsE2 142qD/8bngFZEH1T4WxMwG7UOQ== X-Received: by 2002:a5d:4902:: with SMTP id x2mr6199315wrq.301.1583246817859; Tue, 03 Mar 2020 06:46:57 -0800 (PST) Received: from [10.1.3.173] (laubervilliers-658-1-213-31.w90-63.abo.wanadoo.fr. [90.63.244.31]) by smtp.gmail.com with ESMTPSA id p16sm33803254wrw.15.2020.03.03.06.46.56 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Tue, 03 Mar 2020 06:46:57 -0800 (PST) Subject: Re: [PATCH v6 3/3] arm64: dts: meson: add support for the SmartLabs SML-5442TW To: Christian Hewitt , Rob Herring , Mark Rutland , Kevin Hilman , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org Cc: =?UTF-8?Q?Andreas_F=c3=a4rber?= , =?UTF-8?Q?Jer=c3=b4me_Brunet?= References: <1583036241-88937-1-git-send-email-christianshewitt@gmail.com> <1583036241-88937-4-git-send-email-christianshewitt@gmail.com> From: Neil Armstrong Autocrypt: addr=narmstrong@baylibre.com; prefer-encrypt=mutual; keydata= xsBNBE1ZBs8BCAD78xVLsXPwV/2qQx2FaO/7mhWL0Qodw8UcQJnkrWmgTFRobtTWxuRx8WWP GTjuhvbleoQ5Cxjr+v+1ARGCH46MxFP5DwauzPekwJUD5QKZlaw/bURTLmS2id5wWi3lqVH4 BVF2WzvGyyeV1o4RTCYDnZ9VLLylJ9bneEaIs/7cjCEbipGGFlfIML3sfqnIvMAxIMZrvcl9 qPV2k+KQ7q+aXavU5W+yLNn7QtXUB530Zlk/d2ETgzQ5FLYYnUDAaRl+8JUTjc0CNOTpCeik 80TZcE6f8M76Xa6yU8VcNko94Ck7iB4vj70q76P/J7kt98hklrr85/3NU3oti3nrIHmHABEB AAHNKE5laWwgQXJtc3Ryb25nIDxuYXJtc3Ryb25nQGJheWxpYnJlLmNvbT7CwHsEEwEKACUC GyMGCwkIBwMCBhUIAgkKCwQWAgMBAh4BAheABQJXDO2CAhkBAAoJEBaat7Gkz/iubGIH/iyk RqvgB62oKOFlgOTYCMkYpm2aAOZZLf6VKHKc7DoVwuUkjHfIRXdslbrxi4pk5VKU6ZP9AKsN NtMZntB8WrBTtkAZfZbTF7850uwd3eU5cN/7N1Q6g0JQihE7w4GlIkEpQ8vwSg5W7hkx3yQ6 2YzrUZh/b7QThXbNZ7xOeSEms014QXazx8+txR7jrGF3dYxBsCkotO/8DNtZ1R+aUvRfpKg5 ZgABTC0LmAQnuUUf2PHcKFAHZo5KrdO+tyfL+LgTUXIXkK+tenkLsAJ0cagz1EZ5gntuheLD YJuzS4zN+1Asmb9kVKxhjSQOcIh6g2tw7vaYJgL/OzJtZi6JlIXOwU0EVid/pAEQAND7AFhr 5faf/EhDP9FSgYd/zgmb7JOpFPje3uw7jz9wFb28Cf0Y3CcncdElYoBNbRlesKvjQRL8mozV 9RN+IUMHdUx1akR/A4BPXNdL7StfzKWOCxZHVS+rIQ/fE3Qz/jRmT6t2ZkpplLxVBpdu95qJ YwSZjuwFXdC+A7MHtQXYi3UfCgKiflj4+/ITcKC6EF32KrmIRqamQwiRsDcUUKlAUjkCLcHL CQvNsDdm2cxdHxC32AVm3Je8VCsH7/qEPMQ+cEZk47HOR3+Ihfn1LEG5LfwsyWE8/JxsU2a1 q44LQM2lcK/0AKAL20XDd7ERH/FCBKkNVzi+svYJpyvCZCnWT0TRb72mT+XxLWNwfHTeGALE +1As4jIS72IglvbtONxc2OIid3tR5rX3k2V0iud0P7Hnz/JTdfvSpVj55ZurOl2XAXUpGbq5 XRk5CESFuLQV8oqCxgWAEgFyEapI4GwJsvfl/2Er8kLoucYO1Id4mz6N33+omPhaoXfHyLSy dxD+CzNJqN2GdavGtobdvv/2V0wukqj86iKF8toLG2/Fia3DxMaGUxqI7GMOuiGZjXPt/et/ qeOySghdQ7Sdpu6fWc8CJXV2mOV6DrSzc6ZVB4SmvdoruBHWWOR6YnMz01ShFE49pPucyU1h Av4jC62El3pdCrDOnWNFMYbbon3vABEBAAHCwn4EGAECAAkFAlYnf6QCGwICKQkQFpq3saTP +K7BXSAEGQECAAYFAlYnf6QACgkQd9zb2sjISdGToxAAkOjSfGxp0ulgHboUAtmxaU3viucV e2Hl1BVDtKSKmbIVZmEUvx9D06IijFaEzqtKD34LXD6fjl4HIyDZvwfeaZCbJbO10j3k7FJE QrBtpdVqkJxme/nYlGOVzcOiKIepNkwvnHVnuVDVPcXyj2wqtsU7VZDDX41z3X4xTQwY3SO1 9nRO+f+i4RmtJcITgregMa2PcB0LvrjJlWroI+KAKCzoTHzSTpCXMJ1U/dEqyc87bFBdc+DI k8mWkPxsccdbs4t+hH0NoE3Kal9xtAl56RCtO/KgBLAQ5M8oToJVatxAjO1SnRYVN1EaAwrR xkHdd97qw6nbg9BMcAoa2NMc0/9MeiaQfbgW6b0reIz/haHhXZ6oYSCl15Knkr4t1o3I2Bqr Mw623gdiTzotgtId8VfLB2Vsatj35OqIn5lVbi2ua6I0gkI6S7xJhqeyrfhDNgzTHdQVHB9/ 7jnM0ERXNy1Ket6aDWZWCvM59dTyu37g3VvYzGis8XzrX1oLBU/tTXqo1IFqqIAmvh7lI0Se gCrXz7UanxCwUbQBFjzGn6pooEHJYRLuVGLdBuoApl/I4dLqCZij2AGa4CFzrn9W0cwm3HCO lR43gFyz0dSkMwNUd195FrvfAz7Bjmmi19DnORKnQmlvGe/9xEEfr5zjey1N9+mt3//geDP6 clwKBkq0JggA+RTEAELzkgPYKJ3NutoStUAKZGiLOFMpHY6KpItbbHjF2ZKIU1whaRYkHpB2 uLQXOzZ0d7x60PUdhqG3VmFnzXSztA4vsnDKk7x2xw0pMSTKhMafpxaPQJf494/jGnwBHyi3 h3QGG1RjfhQ/OMTX/HKtAUB2ct3Q8/jBfF0hS5GzT6dYtj0Ci7+8LUsB2VoayhNXMnaBfh+Q pAhaFfRZWTjUFIV4MpDdFDame7PB50s73gF/pfQbjw5Wxtes/0FnqydfId95s+eej+17ldGp lMv1ok7K0H/WJSdr7UwDAHEYU++p4RRTJP6DHWXcByVlpNQ4SSAiivmWiwOt490+Ac7ATQRN WQbPAQgAvIoM384ZRFocFXPCOBir5m2J+96R2tI2XxMgMfyDXGJwFilBNs+fpttJlt2995A8 0JwPj8SFdm6FBcxygmxBBCc7i/BVQuY8aC0Z/w9Vzt3Eo561r6pSHr5JGHe8hwBQUcNPd/9l 2ynP57YTSE9XaGJK8gIuTXWo7pzIkTXfN40Wh5jeCCspj4jNsWiYhljjIbrEj300g8RUT2U0 FcEoiV7AjJWWQ5pi8lZJX6nmB0lc69Jw03V6mblgeZ/1oTZmOepkagwy2zLDXxihf0GowUif GphBDeP8elWBNK+ajl5rmpAMNRoKxpN/xR4NzBg62AjyIvigdywa1RehSTfccQARAQABwsBf BBgBAgAJBQJNWQbPAhsMAAoJEBaat7Gkz/iuteIH+wZuRDqK0ysAh+czshtG6JJlLW6eXJJR Vi7dIPpgFic2LcbkSlvB8E25Pcfz/+tW+04Urg4PxxFiTFdFCZO+prfd4Mge7/OvUcwoSub7 ZIPo8726ZF5/xXzajahoIu9/hZ4iywWPAHRvprXaim5E/vKjcTeBMJIqZtS4u/UK3EpAX59R XVxVpM8zJPbk535ELUr6I5HQXnihQm8l6rt9TNuf8p2WEDxc8bPAZHLjNyw9a/CdeB97m2Tr zR8QplXA5kogS4kLe/7/JmlDMO8Zgm9vKLHSUeesLOrjdZ59EcjldNNBszRZQgEhwaarfz46 BSwxi7g3Mu7u5kUByanqHyA= Organization: Baylibre Message-ID: <047e8315-9782-82a4-f14a-f7fa40ca854a@baylibre.com> Date: Tue, 3 Mar 2020 15:46:56 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.4.1 MIME-Version: 1.0 In-Reply-To: <1583036241-88937-4-git-send-email-christianshewitt@gmail.com> Content-Type: text/plain; charset=utf-8 Content-Language: en-US Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, On 01/03/2020 05:17, Christian Hewitt wrote: > The SmartLabs SML-5442TW is broadly similar to the P231 reference design > but with the following differences: > > - The Yellow and Blue LEDs are available but disabled > - The Red and Green LEDs are used to signal off/on status > - uart_AO can be accessed after opening the case; soldered pins exist > - GPIOX_17 is forced high to enable the QCA9377 module > > Signed-off-by: Christian Hewitt > --- > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 292 +++++++++++++++++++++ > 2 files changed, 293 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts > > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > index eef0045..6cf8c4a 100644 > --- a/arch/arm64/boot/dts/amlogic/Makefile > +++ b/arch/arm64/boot/dts/amlogic/Makefile > @@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb > +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-sml5442tw.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts > new file mode 100644 > index 0000000..5fdf1ca > --- /dev/null > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts > @@ -0,0 +1,292 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2016 Endless Computers, Inc. > + * Author: Carlo Caione > + * Copyright (c) 2018 BayLibre, SAS > + * Author: Neil Armstrong > + */ > + > +/dts-v1/; > + > +#include "meson-gxl-s905d.dtsi" > + > +/ { > + compatible = "smartlabs,sml5442tw", "amlogic,s905d", > + "amlogic,meson-gxl"; > + model = "SmartLabs SML-5442TW"; > + > + aliases { > + serial0 = &uart_AO; > + serial1 = &uart_A; > + ethernet0 = ðmac; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x80000000>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + yellow { > + label = "sml5442tw:yellow"; The bindings of leds has changed, now you should use function and color ids as described in Documentation/devicetree/bindings/leds/common.yaml > + gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + blue { > + label = "sml5442tw:blue"; > + gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + green { > + label = "sml5442tw:green"; > + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + }; > + > + red { > + label = "sml5442tw:red"; > + gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + }; > + > + hdmi_5v: regulator-hdmi-5v { > + compatible = "regulator-fixed"; > + > + regulator-name = "HDMI_5V"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + > + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-always-on; > + }; > + > + vddio_ao18: regulator-vddio_ao18 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_AO18"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vddio_boot: regulator-vddio_boot { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_BOOT"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vddao_3v3: regulator-vddao_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDAO_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vcc_3v3: regulator-vcc_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; > + }; > + > + wifi32k: wifi32k { > + compatible = "pwm-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; > + clocks = <&wifi32k>; > + clock-names = "ext_clock"; > + }; > + > + cvbs-connector { > + compatible = "composite-video-connector"; > + > + port { > + cvbs_connector_in: endpoint { > + remote-endpoint = <&cvbs_vdac_out>; > + }; > + }; > + }; > + > + hdmi-connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi_tx_tmds_out>; > + }; > + }; > + }; > +}; > + > +&cec_AO { > + status = "okay"; > + pinctrl-0 = <&ao_cec_pins>; > + pinctrl-names = "default"; > + hdmi-phandle = <&hdmi_tx>; > +}; > + > +&cvbs_vdac_port { > + cvbs_vdac_out: endpoint { > + remote-endpoint = <&cvbs_connector_in>; > + }; > +}; > + > +ðmac { > + status = "okay"; > + phy-mode = "rmii"; > + phy-handle = <&internal_phy>; > +}; > + > +/* This will enable the bluetooth module */ > +&gpio { > + bt-en { > + gpio-hog; > + gpios = ; > + output-high; > + line-name = "bt-en"; > + }; > +}; Did you try using the qcom,qca6174-bt compatible similar to the broadcom BT module as described in Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt ? > + > +&hdmi_tx { > + status = "okay"; > + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; > + pinctrl-names = "default"; > + hdmi-supply = <&hdmi_5v>; > +}; > + > +&hdmi_tx_tmds_port { > + hdmi_tx_tmds_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > +}; > + > +&i2c_A { > + status = "okay"; > + pinctrl-0 = <&i2c_a_pins>; > + pinctrl-names = "default"; > +}; > + > +&internal_phy { > + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; > + pinctrl-names = "default"; > +}; > + > +&ir { > + status = "okay"; > + pinctrl-0 = <&remote_input_ao_pins>; > + pinctrl-names = "default"; > +}; > + > +&pwm_ef { > + status = "okay"; > + pinctrl-0 = <&pwm_e_pins>; > + pinctrl-names = "default"; > + clocks = <&clkc CLKID_FCLK_DIV4>; > + clock-names = "clkin0"; > +}; > + > +&saradc { > + status = "okay"; > + vref-supply = <&vddio_ao18>; > +}; > + > +/* Wireless SDIO Module */ > +&sd_emmc_a { > + status = "okay"; > + pinctrl-0 = <&sdio_pins>; > + pinctrl-1 = <&sdio_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + bus-width = <4>; > + cap-sd-highspeed; > + max-frequency = <100000000>; > + > + non-removable; > + disable-wp; > + > + mmc-pwrseq = <&sdio_pwrseq>; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +/* SD card */ > +&sd_emmc_b { > + status = "okay"; > + pinctrl-0 = <&sdcard_pins>; > + pinctrl-1 = <&sdcard_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <4>; > + cap-sd-highspeed; > + max-frequency = <100000000>; > + disable-wp; > + > + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; > + cd-inverted; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +/* eMMC */ > +&sd_emmc_c { > + status = "okay"; > + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; > + pinctrl-1 = <&emmc_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <8>; > + cap-mmc-highspeed; > + max-frequency = <100000000>; > + non-removable; > + disable-wp; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + > + mmc-pwrseq = <&emmc_pwrseq>; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +/* This is connected to the Bluetooth module: */ > +&uart_A { > + status = "okay"; > + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; > + pinctrl-names = "default"; > + uart-has-rtscts; > +}; > + > +/* This UART is brought out to the debug header */ > +&uart_AO { > + status = "okay"; > + pinctrl-0 = <&uart_ao_a_pins>; > + pinctrl-names = "default"; > +}; > + > +&usb0 { > + status = "okay"; > +}; > Neil