Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Wed, 4 Mar 2020 12:28:12 +0000
From:   Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To:     Kevin Hilman <khilman@baylibre.com>
Cc:     Remi Pommarel <repk@triplefau.lt>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Yue Wang <yue.wang@Amlogic.com>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Jerome Brunet <jbrunet@baylibre.com>,
        linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [PATCH v6 0/7] PCI: amlogic: Make PCIe working reliably on AXG
 platforms
Message-ID: <20200304122812.GB6613@e121166-lin.cambridge.arm.com>
References: <20200123232943.10229-1-repk@triplefau.lt>
 <20200224141549.GB15614@e121166-lin.cambridge.arm.com>
 <7h8sklbcmo.fsf@baylibre.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <7h8sklbcmo.fsf@baylibre.com>
User-Agent: Mutt/1.9.4 (2018-02-28)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Sat, Feb 29, 2020 at 05:07:43PM +0100, Kevin Hilman wrote:
> Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> writes:
> 
> > On Fri, Jan 24, 2020 at 12:29:36AM +0100, Remi Pommarel wrote:
> >> PCIe device probing failures have been seen on AXG platforms and were
> >> due to unreliable clock signal output. Setting HHI_MIPI_CNTL0[26] bit
> >> in MIPI's PHY registers solved the problem. This bit controls band gap
> >> reference.
> >> 
> >> As discussed here [1] one of these shared MIPI/PCIE analog PHY register
> >> bits was implemented in the clock driver as CLKID_MIPI_ENABLE. This adds
> >> a PHY driver to control this bit instead, as well as setting the band
> >> gap one in order to get reliable PCIE communication.
> >> 
> >> While at it add another PHY driver to control PCIE only PHY registers,
> >> making AXG code more similar to G12A platform thus allowing to remove
> >> some specific platform handling in pci-meson driver.
> >> 
> >> Please note that CLKID_MIPI_ENABLE removable will be done in a different
> >> serie.
> >> 
> >> Changes since v5:
> >>  - Add additionalProperties in device tree binding documentation
> >>  - Make analog PHY required
> >> 
> >> Changes since v4:
> >>  - Rename the shared MIPI/PCIe PHY to analog
> >>  - Chain the MIPI/PCIe PHY to the PCIe one
> >> 
> >> Changes since v3:
> >>  - Go back to the shared MIPI/PCIe phy driver solution from v2
> >>  - Remove syscon usage
> >>  - Add all dt-bindings documentation
> >> 
> >> Changes since v2:
> >>  - Remove shared MIPI/PCIE device driver and use syscon to access register
> >>    in PCIE only driver instead
> >>  - Include devicetree documentation
> >> 
> >> Changes sinve v1:
> >>  - Move HHI_MIPI_CNTL0 bit control in its own PHY driver
> >>  - Add a PHY driver for PCIE_PHY registers
> >>  - Modify pci-meson.c to make use of both PHYs and remove specific
> >>    handling for AXG and G12A
> >> 
> >> [1] https://lkml.org/lkml/2019/12/16/119
> >> 
> >> Remi Pommarel (7):
> >>   dt-bindings: Add AXG PCIE PHY bindings
> >>   dt-bindings: Add AXG shared MIPI/PCIE analog PHY bindings
> >>   dt-bindings: PCI: meson: Update PCIE bindings documentation
> >>   arm64: dts: meson-axg: Add PCIE PHY nodes
> >>   phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY Driver
> >>   phy: amlogic: Add Amlogic AXG PCIE PHY Driver
> >>   PCI: amlogic: Use AXG PCIE
> >> 
> >>  .../bindings/pci/amlogic,meson-pcie.txt       |  22 +-
> >>  .../amlogic,meson-axg-mipi-pcie-analog.yaml   |  35 ++++
> >>  .../bindings/phy/amlogic,meson-axg-pcie.yaml  |  52 +++++
> >>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi    |  16 ++
> >>  drivers/pci/controller/dwc/pci-meson.c        | 116 ++---------
> >>  drivers/phy/amlogic/Kconfig                   |  22 ++
> >>  drivers/phy/amlogic/Makefile                  |  12 +-
> >>  .../amlogic/phy-meson-axg-mipi-pcie-analog.c  | 188 +++++++++++++++++
> >>  drivers/phy/amlogic/phy-meson-axg-pcie.c      | 192 ++++++++++++++++++
> >>  9 files changed, 543 insertions(+), 112 deletions(-)
> >>  create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
> >>  create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml
> >>  create mode 100644 drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
> >>  create mode 100644 drivers/phy/amlogic/phy-meson-axg-pcie.c
> >
> > Hi Remi,
> >
> > I am ready to pull this series in, do you want me to ? Or you prefer
> > it to go via a different tree upstream ?
> 
> To avoid conflicts, I'll take the DT patch (PATCH 4/7) through my
> amlogic tree, but feel free to take the rest.

Applied patches [1,2,3,5,6,7] to pci/amlogic for v5.7, thanks.

Lorenzo