Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH 10/10] ARM: dts: bcm2711: Add vmmc regulator in emmc2
To:     Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
        devicetree@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com,
        linux-rpi-kernel@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org,
        Rob Herring <robh+dt@kernel.org>
Cc:     ulf.hansson@linaro.org, f.fainelli@gmail.com, phil@raspberrypi.org,
        adrian.hunter@intel.com, linux-kernel@vger.kernel.org
References: <20200306103857.23962-1-nsaenzjulienne@suse.de>
 <20200306103857.23962-11-nsaenzjulienne@suse.de>
From:   Stefan Wahren <stefan.wahren@i2se.com>
Message-ID: <408aa93f-b5c8-c4b3-384b-c8d018a8d549@i2se.com>
Date:   Fri, 6 Mar 2020 12:07:41 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
 Thunderbird/60.9.0
MIME-Version: 1.0
In-Reply-To: <20200306103857.23962-11-nsaenzjulienne@suse.de>
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Content-Language: en-US
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Nicolas,

On 06.03.20 11:38, Nicolas Saenz Julienne wrote:
> The SD card power can be controlled trough a pin routed into the board's
> external GPIO expander. Turn that into a regulator and provide it to
> emmc2.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> ---
>  arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> index e26ea9006378..8e98e917f9f4 100644
> --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> @@ -56,6 +56,16 @@ sd_io_1v8_reg: sd_io_1v8_reg {
>  			  3300000 0x0>;
>  		status = "okay";
>  	};
> +
> +	sd_vcc_reg: sd_vcc_reg {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc-sd";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		enable-active-high;
> +		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
this new GPIO has an empty GPIO label, please add it.
> +	};
>  };
>  
>  &firmware {
> @@ -174,6 +184,7 @@ brcmf: wifi@1 {
>  /* EMMC2 is used to drive the SD card */
>  &emmc2 {
>  	vqmmc-supply = <&sd_io_1v8_reg>;
> +	vmmc-supply = <&sd_vcc_reg>;
>  	broken-cd;
>  	status = "okay";
>  };