Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To:     Mauro Carvalho Chehab <mchehab@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Sakari Ailus <sakari.ailus@linux.intel.com>,
        Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc:     linux-media@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        Lad Prabhakar <prabhakar.csengg@gmail.com>,
        Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH 2/2] media: i2c: ov5645: Switch to assigned-clock-rates
Date:   Mon,  9 Mar 2020 11:46:13 +0000
Message-Id: <1583754373-16510-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
In-Reply-To: <1583754373-16510-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
References: <1583754373-16510-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This patch switches to assigned-clock-rates for specifying the clock rate.
The clk-conf.c internally handles setting the clock rate, as a result
setting the clk rate from the driver is dropped.

Correspondingly imx6qdl-wandboard.dtsi which references to ov5645 has been
updated to use assigned-clock-rates in the same patch to avoid bisect
failures.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 3 ++-
 drivers/media/i2c/ov5645.c               | 9 ++-------
 2 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index c070893..71f5f75 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -126,7 +126,8 @@
 		reg = <0x3c>;
 		clocks = <&clks IMX6QDL_CLK_CKO2>;
 		clock-names = "xclk";
-		clock-frequency = <24000000>;
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO2>;
+		assigned-clock-rates = <24000000>;
 		vdddo-supply = <&reg_1p8v>;
 		vdda-supply = <&reg_2p8v>;
 		vddd-supply = <&reg_1p5v>;
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index a6c17d1..2aa2677 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -1094,7 +1094,8 @@ static int ov5645_probe(struct i2c_client *client)
 		return PTR_ERR(ov5645->xclk);
 	}
 
-	ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
+	ret = of_property_read_u32(dev->of_node, "assigned-clock-rates",
+				   &xclk_freq);
 	if (ret) {
 		dev_err(dev, "could not get xclk frequency\n");
 		return ret;
@@ -1107,12 +1108,6 @@ static int ov5645_probe(struct i2c_client *client)
 		return -EINVAL;
 	}
 
-	ret = clk_set_rate(ov5645->xclk, xclk_freq);
-	if (ret) {
-		dev_err(dev, "could not set xclk frequency\n");
-		return ret;
-	}
-
 	for (i = 0; i < OV5645_NUM_SUPPLIES; i++)
 		ov5645->supplies[i].supply = ov5645_supply_name[i];
 
-- 
2.7.4