Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Sat, 14 Mar 2020 22:19:24 +0100
From:   Andrew Lunn <andrew@lunn.ch>
To:     Madalin Bucur <madalin.bucur@oss.nxp.com>
Cc:     davem@davemloft.net, netdev@vger.kernel.org,
        devicetree@vger.kernel.org, shawnguo@kernel.org,
        leoyang.li@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH net 3/3] arm64: dts: ls1046ardb: set RGMII interfaces to
 RGMII_ID mode
Message-ID: <20200314211924.GC8622@lunn.ch>
References: <1584101065-3482-1-git-send-email-madalin.bucur@oss.nxp.com>
 <1584101065-3482-4-git-send-email-madalin.bucur@oss.nxp.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1584101065-3482-4-git-send-email-madalin.bucur@oss.nxp.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Fri, Mar 13, 2020 at 02:04:25PM +0200, Madalin Bucur wrote:
> The correct setting for the RGMII ports on LS1046ARDB is to
> enable delay on both Rx and Tx so the interface mode used must
> be PHY_INTERFACE_MODE_RGMII_ID.
> 
> Since commit 1b3047b5208a80 ("net: phy: realtek: add support for
> configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
> has control over the RGMII RX delay and it is disabling it for
> RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but
> in the device tree the mode was described as "rgmii".
> 
> Changing the phy-connection-type to "rgmii-id" to address the issue.
> 
> Fixes: 3fa395d2c48a ("arm64: dts: add LS1046A DPAA FMan nodes")
> Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew