Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030293AbWBTPv6 (ORCPT ); Mon, 20 Feb 2006 10:51:58 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1030291AbWBTPv6 (ORCPT ); Mon, 20 Feb 2006 10:51:58 -0500 Received: from [217.7.64.195] ([217.7.64.195]:1230 "EHLO moci.net4u.de") by vger.kernel.org with ESMTP id S1030293AbWBTPv4 (ORCPT ); Mon, 20 Feb 2006 10:51:56 -0500 From: Ernst Herzberg Reply-To: earny@net4u.de Organization: Net4U To: linux-kernel@vger.kernel.org Subject: 2.6.16-rc4 bridge/iptables Oops Date: Mon, 20 Feb 2006 16:51:50 +0100 User-Agent: KMail/1.8.3 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200602201651.50217.list-lkml@net4u.de> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 31059 Lines: 705 This machine oopses one to three (or more?) times a day. Occurs since upgrading from -rc3 to -rc4 (and adding/reconfiguring raid). It is reproducable, i have only to wait 10min to a couple of hours:-) Opps copy/pasted from a serial console, long lines maybe truncated. dmesg is from the _previous_ boot/oops.... ------------------------------------------- Oops: 0000 [#1] PREEMPT Modules linked in: ebt_log ebt_ip ebtable_filter ebtables nfsd exportfs lockd sunrpc w83627hf hwmon_vid i2c_isa xt_tcpudp xt_state ipt_MASQUERADE iptable_e CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010282 (2.6.16-rc4 #3) EIP is at xfrm_lookup+0x1f/0x47d eax: 00000000 ebx: b0452bb4 ecx: 00000000 edx: b0452bb4 esi: b0452c90 edi: d6c9aa58 ebp: 80000000 esp: b0452b08 ds: 007b es: 007b ss: 0068 Process vtund (pid: 12035, threadinfo=b0452000 task=ef8cb030) Stack: <0>b0452000 d6c9aa58 b0452bc4 00000000 f153b56a b0452b84 d6c9aa58 f1546181 b03e5d20 00000000 b0452bb4 b0452bb0 b0452b84 b0452b94 f1546511 d804fd24 d6c9aa58 b0452b94 d6c9aa58 00000000 b0452b84 f15465a6 d6c9aa58 00000000 Call Trace: [] ip_conntrack_tuple_taken+0x2c/0x3e [ip_conntrack] [] ip_nat_used_tuple+0x1f/0x2b [ip_nat] [] get_unique_tuple+0xca/0xe6 [ip_nat] [] ip_nat_setup_info+0x79/0x1fd [ip_nat] [] ip_xfrm_me_harder+0x5d/0x14b [] ip_nat_out+0xb2/0xde [iptable_nat] [] br_dev_queue_push_xmit+0x0/0x12a [] nf_iterate+0x52/0x7e [] br_dev_queue_push_xmit+0x0/0x12a [] br_dev_queue_push_xmit+0x0/0x12a [] nf_hook_slow+0x68/0x115 [] br_dev_queue_push_xmit+0x0/0x12a [] br_nf_post_routing+0x164/0x1b9 [] br_dev_queue_push_xmit+0x0/0x12a [] nf_iterate+0x52/0x7e [] br_dev_queue_push_xmit+0x0/0x12a [] br_dev_queue_push_xmit+0x0/0x12a [] nf_hook_slow+0x68/0x115 [] br_dev_queue_push_xmit+0x0/0x12a [] br_forward_finish+0x53/0x5f [] br_dev_queue_push_xmit+0x0/0x12a [] br_nf_forward_finish+0x55/0x121 [] br_forward_finish+0x0/0x5f [] br_nf_forward_ip+0xe5/0x191 [] br_nf_forward_finish+0x0/0x121 [] nf_iterate+0x52/0x7e [] br_forward_finish+0x0/0x5f [] br_forward_finish+0x0/0x5f [] nf_hook_slow+0x68/0x115 [] br_forward_finish+0x0/0x5f [] __br_forward+0x62/0x6c [] br_forward_finish+0x0/0x5f [] br_flood+0x7b/0xcb [] __br_forward+0x0/0x6c [] br_flood_forward+0xf/0x14 [] __br_forward+0x0/0x6c [] br_handle_frame_finish+0x102/0x11d [] br_nf_pre_routing_finish+0xeb/0x38a [] br_handle_frame_finish+0x0/0x11d [] ip_nat_fn+0x93/0x224 [iptable_nat] [] ip_conntrack_in+0x174/0x286 [ip_conntrack] [] ip_nat_in+0x2b/0xd7 [iptable_nat] [] br_nf_pre_routing_finish+0x0/0x38a [] nf_iterate+0x52/0x7e [] br_nf_pre_routing_finish+0x0/0x38a [] br_nf_pre_routing_finish+0x0/0x38a [] nf_hook_slow+0x68/0x115 [] br_nf_pre_routing_finish+0x0/0x38a [] br_nf_pre_routing+0x2f9/0x53c [] br_nf_pre_routing_finish+0x0/0x38a [] nf_iterate+0x52/0x7e [] br_handle_frame_finish+0x0/0x11d [] br_handle_frame_finish+0x0/0x11d [] nf_hook_slow+0x68/0x115 [] br_handle_frame_finish+0x0/0x11d [] br_handle_frame+0x1a9/0x208 [] br_handle_frame_finish+0x0/0x11d [] netif_receive_skb+0x1e4/0x2e6 [] process_backlog+0x78/0xec [] net_rx_action+0x12a/0x1af [] __do_softirq+0x3e/0x8a [] do_softirq+0x41/0x50 ======================= [] netif_rx_ni+0x42/0x4b [] tun_chr_writev+0x140/0x1be [] tun_chr_write+0x0/0x24 [] tun_chr_write+0x20/0x24 [] vfs_write+0x96/0x16e [] sys_write+0x41/0x6a [] syscall_call+0x7/0xb Code: 8b 7c 24 10 8b 6c 24 14 83 c4 18 c3 55 57 56 53 81 ec 84 00 00 00 89 44 24 2c 89 54 24 28 89 4c 24 24 8b 00 89 44 24 20 8b 40 7c <0f> b7 00 66 89 44 <0>Kernel panic - not syncing: Fatal exception in interrupt ------------------dmesg-------------------- Linux version 2.6.16-rc4 (root@oernie) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #3 PREEMPT Mon Feb 20 02:13:12 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 1023MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 262064 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 257968 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000fad80 ACPI: XSDT (v001 A M I OEMXSDT 0x09000507 MSFT 0x00000097) @ 0x3ffb0100 ACPI: FADT (v003 A M I OEMFACP 0x09000507 MSFT 0x00000097) @ 0x3ffb0290 ACPI: MADT (v001 A M I OEMAPIC 0x09000507 MSFT 0x00000097) @ 0x3ffb0390 ACPI: OEMB (v001 A M I OEMBIOS 0x09000507 MSFT 0x00000097) @ 0x3ffc0040 ACPI: DSDT (v001 A0030 A0030011 0x00000011 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000) Built 1 zonelists Kernel command line: root=/dev/md2 vga=0x31a console=ttyS0,38400n8 console=tty0 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=b0453000 soft=b0452000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2799.151 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Memory: 1034212k/1048256k available (2400k kernel code, 13544k reserved, 796k data, 176k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5606.29 BogoMIPS (lpj=11212582) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0a: ioport range 0x680-0x6ff has been reserved pnp: 00:0a: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: fe900000-fe9fffff PREFETCH window: d7e00000-f7dfffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fea00000-feafffff PREFETCH window: f7e00000-f7efffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 Machine check exception polling timer started. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xe8000000, mapped to 0xf0880000, using 5120k, total 131072k vesafb: mode is 1280x1024x16, linelength=2560, pages=50 vesafb: protected mode interface info at c000:56df vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac hw_random: RNG not detected Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 865 Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.21.0 20051229 on minor 0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 16 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:09.0: 3Com PCI 3c905C Tornado at f0804400. Vers LK1.1.19 ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 17 eth1: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 16 PCI: Via IRQ fixup for 0000:02:0d.0, from 5 to 0 eth2: VIA Rhine II at 0x1d000, 00:05:5d:dd:0a:80, IRQ 16. eth2: MII PHY found at address 8, status 0x7829 advertising 01e1 Link 45e1. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6Y080P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: SAMSUNG SP0802N, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: max request size: 512KiB hdc: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 18 ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF68 irq 18 ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:20ff ata1: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:20ff ata2: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48 ata2: dev 0 configured for UDMA/133 scsi1 : ata_piix Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10 Type: Direct-Access ANSI SCSI revision: 05 sata_promise 0000:02:04.0: version 1.03 ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 23 (level, low) -> IRQ 19 ata3: SATA max UDMA/133 cmd 0xF0806200 ctl 0xF0806238 bmdma 0x0 irq 19 ata4: SATA max UDMA/133 cmd 0xF0806280 ctl 0xF08062B8 bmdma 0x0 irq 19 ata3: SATA link up 1.5 Gbps (SStatus 113) ata3: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:80ff ata3: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48 ata3: dev 0 configured for UDMA/133 scsi2 : sata_promise ata4: SATA link up 1.5 Gbps (SStatus 113) ata4: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:80ff ata4: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48 ata4: dev 0 configured for UDMA/133 scsi3 : sata_promise Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back sdc: sdc1 sd 2:0:0:0: Attached scsi disk sdc SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back sdd: sdd1 sd 3:0:0:0: Attached scsi disk sdd sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: Attached scsi generic sg3 type 0 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 3578.000 MB/sec raid5: using function: pIII_sse (3578.000 MB/sec) md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 MC: drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Feb 20 2006 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 15 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller Using IPI Shortcut mode ACPI wakeup devices: P0P4 MC97 USB1 USB2 USB3 USB4 EUSB PS2K ILAN ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: considering sdd1 ... md: adding sdd1 ... md: adding sdc1 ... md: adding sdb1 ... md: adding sda1 ... md: hdc3 has different UUID to sdd1 md: hdc2 has different UUID to sdd1 md: hdc1 has different UUID to sdd1 md: hda3 has different UUID to sdd1 md: hda2 has different UUID to sdd1 md: hda1 has different UUID to sdd1 md: created md3 md: bind md: bind md: bind md: bind md: running: raid5: device sdd1 operational as raid disk 3 raid5: device sdc1 operational as raid disk 2 raid5: device sdb1 operational as raid disk 1 raid5: device sda1 operational as raid disk 0 raid5: allocated 4195kB for md3 raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 fd:0 disk 0, o:1, dev:sda1 disk 1, o:1, dev:sdb1 disk 2, o:1, dev:sdc1 disk 3, o:1, dev:sdd1 md: considering hdc3 ... md: adding hdc3 ... md: hdc2 has different UUID to hdc3 md: hdc1 has different UUID to hdc3 md: adding hda3 ... md: hda2 has different UUID to hdc3 md: hda1 has different UUID to hdc3 md: created md2 md: bind md: bind md: running: md2: setting max_sectors to 32, segment boundary to 8191 raid0: looking at hdc3 raid0: comparing hdc3(76035520) with hdc3(76035520) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at hda3 raid0: comparing hda3(77894592) with hdc3(76035520) raid0: NOT EQUAL raid0: comparing hda3(77894592) with hda3(77894592) raid0: END raid0: ==> UNIQUE raid0: 2 zones raid0: FINAL 2 zones raid0: zone 1 raid0: checking hda3 ... contained as device 0 (77894592) is smallest!. raid0: checking hdc3 ... nope. raid0: zone->nb_dev: 1, size: 1859072 raid0: current zone offset: 77894592 raid0: done. raid0 : md_size is 153930112 blocks. raid0 : conf->hash_spacing is 152071040 blocks. raid0 : nb_zone is 2. raid0 : Allocating 8 bytes for hash. md: considering hdc2 ... md: adding hdc2 ... md: hdc1 has different UUID to hdc2 md: adding hda2 ... md: hda1 has different UUID to hdc2 md: created md1 md: bind md: bind md: running: md1: setting max_sectors to 32, segment boundary to 8191 raid0: looking at hdc2 raid0: comparing hdc2(1951808) with hdc2(1951808) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at hda2 raid0: comparing hda2(1952896) with hdc2(1951808) raid0: NOT EQUAL raid0: comparing hda2(1952896) with hda2(1952896) raid0: END raid0: ==> UNIQUE raid0: 2 zones raid0: FINAL 2 zones raid0: zone 1 raid0: checking hda2 ... contained as device 0 (1952896) is smallest!. raid0: checking hdc2 ... nope. raid0: zone->nb_dev: 1, size: 1088 raid0: current zone offset: 1952896 raid0: done. raid0 : md_size is 3904704 blocks. raid0 : conf->hash_spacing is 3903616 blocks. raid0 : nb_zone is 2. raid0 : Allocating 8 bytes for hash. md: considering hdc1 ... md: adding hdc1 ... md: adding hda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. ReiserFS: md2: found reiserfs format "3.6" with standard journal ReiserFS: md2: using ordered data mode ReiserFS: md2: journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md2: checking transaction log (md2) ReiserFS: md2: replayed 7 transactions in 0 seconds ReiserFS: md2: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 176k freed Adding 3904696k swap on /dev/md1. Priority:-1 extents:1 across:3904696k ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] Linux video capture interface: v1.00 saa7146: register extension 'dvb'. ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 17 saa7146: found saa7146 @ mem f1024000 (revision 1, irq 17) (0x13c2,0x0003). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). adapter has MAC addr = 00:d0:5c:23:85:9b dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622 dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: Crystal audio DAC @ card 0 detected saa7146_vv: saa7146 (0): registered device video0 [v4l2] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2] DVB: registering frontend 0 (ST STV0299 DVB-S)... input: DVB on-card IR receiver as /class/input/input2 dvb-ttpci: found av7110-0. bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20 bttv0: Bt878 (rev 17) at 0000:02:0c.0, irq: 20, latency: 64, mmio: 0xf7efe000 bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c bttv0: using: Pinnacle PCTV Sat [card=94,autodetected] bttv0: gpio: en=00000000, out=00000000 in=009f00fc [init] bttv0: using tuner=-1 bttv0: registered device video1 bttv0: registered device vbi1 bttv0: PLL: 28636363 => 35468950 .. ok bttv0: add subdevice "dvb0" bt878: DVB driver version 0.0.1 loaded bt878: DVB interface found (0). ACPI: PCI Interrupt 0000:02:0c.1[A] -> GSI 20 (level, low) -> IRQ 20 bt878_probe: card id=[0x1c11bd],[ Pinnacle PCTV Sat ] has DVB functions. bt878(0): Bt878 (rev 17) at 02:0c.1, irq: 20, latency: 64, memory: 0xf7eff000 DVB: registering new adapter (bttv0). DVB: registering frontend 1 (Conexant CX24110 DVB-S)... kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: md3: found reiserfs format "3.6" with standard journal ReiserFS: md3: using ordered data mode ReiserFS: md3: journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md3: checking transaction log (md3) ReiserFS: md3: replayed 15 transactions in 4 seconds ReiserFS: md3: Using r5 hash to sort names usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ef00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ef20 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000ef80 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Cypress Semi. Cypress Ultra Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Cypress Semi. Cypress Ultra Mouse] on usb-0000:00:1d.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 5-8: new high speed USB device using ehci_hcd and address 3 usb 5-8: configuration #1 chosen from 1 choice scsi5 : SCSI emulation for USB Mass Storage devices usb 4-2: USB disconnect, address 2 usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb 2-1: USB disconnect, address 2 usb 2-1: new low speed USB device using uhci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice input: Cypress Semi. Cypress Ultra Mouse as /class/input/input4 input: USB HID v1.10 Mouse [Cypress Semi. Cypress Ultra Mouse] on usb-0000:00:1d.1-1 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 54585 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:02:03.0, from 5 to 4 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] parport0: Printer, Hewlett-Packard OfficeJet T Series ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800006d7518] Vendor: WDC WD25 Model: 00JB-00GVA0 Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) sde: Write Protect is off sde: Mode Sense: 03 00 00 00 sde: assuming drive cache: write through SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) sde: Write Protect is off sde: Mode Sense: 03 00 00 00 sde: assuming drive cache: write through sde: sde1 sd 5:0:0:0: Attached scsi disk sde sd 5:0:0:0: Attached scsi generic sg4 type 0 usb-storage: device scan complete device eth1 entered promiscuous mode eth1: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled scatter-gather: disabled tx-checksum: disabled rx-checksum: disabled br1: port 1(eth1) entering learning state ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 16 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 NET: Registered protocol family 17 NET: Registered protocol family 24 process `named' is using obsolete setsockopt SO_BSDCOMPAT ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8189 buckets, 65512 max) - 232 bytes per conntrack br1: topology change detected, propagating br1: port 1(eth1) entering forwarding state w83627hf 9191-0290: Reading VID from GPIO5 device tap0 entered promiscuous mode br1: port 2(tap0) entering listening state Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: unable to find recovery directory /var/lib/nfs/v4recovery NFSD: starting 90-second grace period Ebtables v2.0 registered agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: reserved bits set (4) in mode 0x1f004a0f. Fixed. agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [drm] Loading R200 Microcode br1: port 2(tap0) entering learning state br1: received tcn bpdu on port 2(tap0) br1: topology change detected, propagating br1: topology change detected, propagating br1: port 2(tap0) entering forwarding state ------------ config ---------------- on request, email is big enough:) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/