Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Tiezhu Yang <yangtiezhu@loongson.cn>
To:     Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
        Huacai Chen <chenhc@lemote.com>,
        Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc:     linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
        Xuefeng Li <lixuefeng@loongson.cn>
Subject: [PATCH v2 0/3] Add basic support for Loongson 7A1000 bridge chip
Date:   Mon, 23 Mar 2020 10:59:12 +0800
Message-Id: <1584932355-3642-1-git-send-email-yangtiezhu@loongson.cn>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The Loongson 7A1000 bridge chip has been released for several years
since the second half of 2017, but it is not supported by the Linux
mainline kernel while it only works well with the Loongson internal
kernel version. When I update the latest version of Linux mainline
kernel on the Loongson 3A3000 CPU and 7A1000 bridge chip system,
the boot process failed and I feel depressed.

The 7A1000 bridge chip is used a lot with 3A3000 or 3A4000 CPU in
the most Loongson desktop and sever products, it is important to
support Loongson 7A1000 bridge chip by the Linux mainline kernel.

This patch series adds the basic support for the Loongson 7A1000
bridge chip, when apply these patches based on linux-5.6-rc7, the
boot process is successful and we can login normally used with the
latest firmware and discrete graphics card, the next work to do is
power management and some other controller device drivers.

Additionally, when I git clone mips code [1], the speed is too slow
and clone always failed, so this patch series is based on the latest
linux-5.6-rc7 [2].

If you have any questions and suggestions, please let me know.

Thanks,

Tiezhu Yang

v2:
  - The split patch series about Loongson vendor ID and SATA controller
    has been merged into the linux-block.git by Jens Axboe [3].

  - Think about using hierarchy IRQ domain in the patch of interrupt
    controller, and this maybe depend on the patch series by Jiaxun
    ("Modernize Loongson64 Machine"), so the patch about interrupt is
    not included in this v2 patch series.

[1] git clone https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
[2] git clone https://github.com/torvalds/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git/commit/?h=for-next&id=9acb9fe18d86
    https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git/commit/?h=for-next&id=e49bd683e00b

Tiezhu Yang (3):
  MIPS: Loongson: Get host bridge information
  MIPS: Loongson: Add DMA support for 7A1000
  MIPS: Loongson: Add PCI support for 7A1000

 arch/mips/include/asm/mach-loongson64/boot_param.h | 20 ++++++
 arch/mips/loongson64/dma.c                         |  9 ++-
 arch/mips/loongson64/env.c                         | 20 ++++++
 arch/mips/loongson64/init.c                        | 17 +++++
 arch/mips/pci/ops-loongson3.c                      | 72 ++++++++++++++++++++--
 5 files changed, 131 insertions(+), 7 deletions(-)

-- 
2.1.0