Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1422636AbWBVAfG (ORCPT ); Tue, 21 Feb 2006 19:35:06 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1422639AbWBVAfF (ORCPT ); Tue, 21 Feb 2006 19:35:05 -0500 Received: from HSI-KBW-082-212-034-022.hsi.kabelbw.de ([82.212.34.22]:27033 "EHLO afrodita") by vger.kernel.org with ESMTP id S1422635AbWBVAfD (ORCPT ); Tue, 21 Feb 2006 19:35:03 -0500 From: Ariel Garcia To: "Randy.Dunlap" Subject: Re: 2.6.16-rc4 libata + AHCI patched for suspend fails on ICH6 Date: Wed, 22 Feb 2006 01:34:29 +0100 User-Agent: KMail/1.9.1 Cc: Jens Axboe , linux-kernel@vger.kernel.org References: <200602191958.38219.garcia@iwr.fzk.de> <200602212350.33394.garcia@iwr.fzk.de> In-Reply-To: MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_VG7+DPRKb3riIt3" Message-Id: <200602220134.29543.garcia@iwr.fzk.de> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 38635 Lines: 666 --Boundary-00=_VG7+DPRKb3riIt3 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi again Randy, wow, thanks for your ultra fast-patch ;-) > > do_drive_get_GTF: ERR: ata_dev_present: 0, PORT_DISABLED: 0 > > ata_acpi_exec_tfs: get_GTF error (-19) > > ata_acpi_exec_tfs: ret=-19 > > > > but no extra debugging output after the suspend/restart. Does that > > help? dmesg output attached. > > The "error" is only for the second drive (ix=1, which you don't have, > right?). I guess I need to disable that message. oh, right, only one sata HD (pure SATA, not pata as far as i understand) > Please add this additional patch (attached) (credit: SUSE) and > let us know if it helps. Meanwhile I will check the resume > path to see if I notice anything that is missing. done, attached the dmesg. All your new debugging lines appear. This time i didn't care of unloading all unneded modules (like ipw2200, etc) and as you can notice there is a kind of funtion call backtrace regarding an unhandled interrupt just after call ata_exec_internal, that is interrupt 177 which is associated to vga+audio+usb+cardbus This reminded me that once every 10 boots (approx, just to put a number), my laptop fails to initialize the HD when booting, the drive is detected but it doesn't respond and therefore the partition table cannot be read... (i find only sda in /proc/partitions) When this happens, the root fs cannot be mounted (obviously), but i land in the initramfs: from there I can reproduce the error messages by removing and reloading either the ahci or the ata_piix modules. I have to reboot to get the drive working again. I saved the dmesg output when reloading the ahci module, it is attached (bootfail-log-ahci.txt) Good night! Ariel --Boundary-00=_VG7+DPRKb3riIt3 Content-Type: text/plain; charset="utf-8"; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg" MEM window: disabled. [4294668.180000] PREFETCH window: disabled. [4294668.180000] PCI: Bus 7, cardbus bridge: 0000:06:03.0 [4294668.180000] IO window: 00002000-000020ff [4294668.180000] IO window: 00002400-000024ff [4294668.181000] PREFETCH window: 50000000-51ffffff [4294668.181000] MEM window: 54000000-55ffffff [4294668.181000] PCI: Bridge: 0000:00:1e.0 [4294668.181000] IO window: 2000-2fff [4294668.181000] MEM window: b0200000-b02fffff [4294668.181000] PREFETCH window: 50000000-51ffffff [4294668.181000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 [4294668.181000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [4294668.181000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177 [4294668.181000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [4294668.181000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [4294668.181000] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 16 (level, low) -> IRQ 177 [4294668.181000] Simple Boot Flag at 0x7f set to 0x1 [4294668.182000] audit: initializing netlink socket (disabled) [4294668.182000] audit(1140565679.180:1): initialized [4294668.182000] Initializing Cryptographic API [4294668.182000] io scheduler noop registered [4294668.182000] io scheduler anticipatory registered (default) [4294668.183000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 [4294668.183000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [4294668.183000] assign_interrupt_mode Found MSI capability [4294668.183000] Allocate Port Service[0000:00:1c.0:pcie00] [4294668.183000] Allocate Port Service[0000:00:1c.0:pcie02] [4294668.183000] Allocate Port Service[0000:00:1c.0:pcie03] [4294668.183000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177 [4294668.183000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [4294668.183000] assign_interrupt_mode Found MSI capability [4294668.183000] Allocate Port Service[0000:00:1c.1:pcie00] [4294668.183000] Allocate Port Service[0000:00:1c.1:pcie02] [4294668.183000] Allocate Port Service[0000:00:1c.1:pcie03] [4294668.185000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [4294668.187000] i8042.c: Detected active multiplexing controller, rev 1.1. [4294668.190000] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [4294668.190000] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [4294668.190000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [4294668.191000] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [4294668.191000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294668.191000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [4294668.191000] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels) [4294668.192000] MC: drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Feb 19 2006 [4294668.192000] NET: Registered protocol family 2 [4294668.202000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [4294668.202000] TCP established hash table entries: 131072 (order: 7, 524288 bytes) [4294668.202000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [4294668.203000] TCP: Hash tables configured (established 131072 bind 65536) [4294668.203000] TCP reno registered [4294668.203000] TCP bic registered [4294668.203000] NET: Registered protocol family 1 [4294668.203000] NET: Registered protocol family 17 [4294668.203000] NET: Registered protocol family 8 [4294668.203000] NET: Registered protocol family 20 [4294668.203000] Using IPI Shortcut mode [4294668.203000] ACPI wakeup devices: [4294668.203000] PCIB MODM AZAL EXP1 EXP2 LID [4294668.204000] ACPI: (supports S0 S3 S4 S5) [4294668.204000] Freeing unused kernel memory: 164k freed [4294668.263000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [4294668.351000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294668.430000] usbcore: registered new driver usbfs [4294668.430000] usbcore: registered new driver hub [4294668.431000] USB Universal Host Controller Interface driver v2.3 [4294668.431000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209 [4294668.431000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [4294668.431000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [4294668.431000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [4294668.431000] uhci_hcd 0000:00:1d.0: irq 209, io base 0x00001420 [4294668.431000] usb usb1: configuration #1 chosen from 1 choice [4294668.431000] hub 1-0:1.0: USB hub found [4294668.431000] hub 1-0:1.0: 2 ports detected [4294668.532000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217 [4294668.532000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [4294668.532000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [4294668.532000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [4294668.532000] uhci_hcd 0000:00:1d.1: irq 217, io base 0x00001440 [4294668.532000] usb usb2: configuration #1 chosen from 1 choice [4294668.532000] hub 2-0:1.0: USB hub found [4294668.532000] hub 2-0:1.0: 2 ports detected [4294668.633000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225 [4294668.633000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [4294668.633000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [4294668.633000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [4294668.633000] uhci_hcd 0000:00:1d.2: irq 225, io base 0x00001460 [4294668.634000] usb usb3: configuration #1 chosen from 1 choice [4294668.634000] hub 3-0:1.0: USB hub found [4294668.634000] hub 3-0:1.0: 2 ports detected [4294668.735000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177 [4294668.735000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [4294668.735000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [4294668.735000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [4294668.735000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x00001480 [4294668.735000] usb usb4: configuration #1 chosen from 1 choice [4294668.735000] hub 4-0:1.0: USB hub found [4294668.735000] hub 4-0:1.0: 2 ports detected [4294668.836000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209 [4294668.836000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [4294668.836000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [4294668.836000] ehci_hcd 0000:00:1d.7: debug port 1 [4294668.836000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [4294668.836000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [4294668.837000] ehci_hcd 0000:00:1d.7: irq 209, io mem 0xb0004000 [4294668.841000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294668.841000] usb usb5: configuration #1 chosen from 1 choice [4294668.841000] hub 5-0:1.0: USB hub found [4294668.841000] hub 5-0:1.0: 8 ports detected [4294668.925000] SCSI subsystem initialized [4294668.928000] libata version 1.20 loaded. [4294668.938000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294668.939000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294668.942000] tg3.c:v3.49 (Feb 2, 2006) [4294668.942000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 177 [4294668.942000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [4294668.965000] eth0: Tigon3 [partno(BCM95751m) rev 4201 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:0b:5d:c7:47:ef [4294668.966000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [4294668.966000] eth0: dma_rwctrl[76180000] [4294668.986000] ahci 0000:00:1f.2: version 1.2 [4294668.986000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217 [4294673.299000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [4294673.299000] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode [4294673.299000] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part [4294673.299000] ata1: SATA max UDMA/133 cmd 0xF882E500 ctl 0x0 bmdma 0x0 irq 217 [4294673.299000] ata2: SATA max UDMA/133 cmd 0xF882E580 ctl 0x0 bmdma 0x0 irq 217 [4294673.299000] ata3: SATA max UDMA/133 cmd 0xF882E600 ctl 0x0 bmdma 0x0 irq 217 [4294673.299000] ata4: SATA max UDMA/133 cmd 0xF882E680 ctl 0x0 bmdma 0x0 irq 217 [4294673.501000] ata1: SATA link up 1.5 Gbps (SStatus 113) [4294673.501000] ata1: dev 0 cfg 00:045a 49:2f00 82:346b 83:7f09 84:6063 85:346b 86:bf09 87:6063 88:203f 93:0000 [4294673.501000] ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48 [4294673.501000] ata_acpi_push_id: ap->id: 1, ix = 0, port#: 0, hard_port#: 0 [4294673.501000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xc17dff40 [4294673.505000] :\_SB_.PCI0.SATA: matches pcidevfn (0x1f0002) [4294673.505000] GOT ONE: (\_SB_.PCI0.SATA.PRT0) root_port = 0x0, port_num = 0xffff [4294673.505000] THIS ^^^^^ is the requested SATA drive (handle = 0xc17d64e0) [4294673.505000] GOT ONE: (\_SB_.PCI0.SATA.PRT2) root_port = 0x2, port_num = 0xffff [4294673.508000] ata1: dev 0 configured for UDMA/100 [4294673.508000] ata_acpi_exec_tfs: ENTER: [4294673.508000] ata_acpi_exec_tfs: call get_GTF, ix=0 [4294673.508000] do_drive_get_GTF: ENTER: ap->id: 1, port#: 0, hard_port#: 0 [4294673.508000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xc17dff40 [4294673.508000] do_drive_get_GTF: returning gtf_length=14, gtf_address=0xf7437330, obj_loc=0xf7437320 [4294673.508000] ata_acpi_exec_tfs: call set_taskfiles, ix=0 [4294673.508000] do_drive_set_taskfiles: ENTER: ap->id: 1, port#: 0, hard_port#: 0 [4294673.508000] do_drive_set_taskfiles: total GTF bytes=14 (0xe), gtf_count=2, addr=0xf7437330 [4294673.508000] taskfile_load_raw: (0x1f1-1f7): hex: 10 03 00 00 00 a0 ef [4294673.508000] call ata_exec_internal: [4294673.510000] taskfile_load_raw: (0x1f1-1f7): hex: 00 00 00 00 00 a0 f5 [4294673.510000] call ata_exec_internal: [4294673.510000] ata_acpi_exec_tfs: call get_GTF, ix=1 [4294673.510000] do_drive_get_GTF: ENTER: ap->id: 1, port#: 0, hard_port#: 0 [4294673.510000] do_drive_get_GTF: ERR: ata_dev_present: 0, PORT_DISABLED: 0 [4294673.510000] ata_acpi_exec_tfs: get_GTF error (-19) [4294673.510000] ata_acpi_exec_tfs: ret=-19 [4294673.510000] scsi0 : ahci [4294673.712000] ata2: SATA link down (SStatus 0) [4294673.712000] scsi1 : ahci [4294673.914000] ata3: SATA link down (SStatus 0) [4294673.914000] scsi2 : ahci [4294674.116000] ata4: SATA link down (SStatus 0) [4294674.116000] scsi3 : ahci [4294674.116000] Vendor: ATA Model: FUJITSU MHV2080B Rev: 0000 [4294674.117000] Type: Direct-Access ANSI SCSI revision: 05 [4294674.117000] ata_acpi_get_timing: ENTER: [4294674.117000] ata_acpi_get_timing: channel/controller not in legacy mode (0000:00:1f.2) [4294674.117000] ata_acpi_get_timing: ENTER: [4294674.117000] ata_acpi_get_timing: channel/controller not in legacy mode (0000:00:1f.2) [4294674.117000] ata_acpi_get_timing: ENTER: [4294674.117000] ata_acpi_get_timing: channel/controller not in legacy mode (0000:00:1f.2) [4294674.117000] ata_acpi_get_timing: ENTER: [4294674.117000] ata_acpi_get_timing: channel/controller not in legacy mode (0000:00:1f.2) [4294674.120000] ICH6: IDE controller at PCI slot 0000:00:1f.1 [4294674.120000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 225 [4294674.120000] ICH6: chipset revision 4 [4294674.120000] ICH6: not 100% native mode: will probe irqs later [4294674.121000] ide0: BM-DMA at 0x1410-0x1417, BIOS settings: hda:DMA, hdb:pio [4294674.121000] Probing IDE interface ide0... [4294674.154000] Driver 'sd' needs updating - please use bus_type methods [4294674.155000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4294674.155000] sda: Write Protect is off [4294674.155000] sda: Mode Sense: 00 3a 00 10 [4294674.156000] SCSI device sda: drive cache: write back w/ FUA [4294674.156000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4294674.156000] sda: Write Protect is off [4294674.156000] sda: Mode Sense: 00 3a 00 10 [4294674.157000] SCSI device sda: drive cache: write back w/ FUA [4294674.157000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [4294674.277000] sd 0:0:0:0: Attached scsi disk sda [4294674.793000] hda: MATSHITAUJ-841Db, ATAPI CD/DVD-ROM drive [4294675.099000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294675.109000] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [4294675.110000] Uniform CD-ROM driver Revision: 3.20 [4294675.726000] Probing IDE interface ide1... [4294676.327000] Attempting manual resume [4294676.328000] swsusp: Resume From Partition 8:6 [4294676.328000] PM: Checking swsusp image. [4294676.328000] PM: Resume from disk failed. [4294676.353000] EXT3-fs: mounted filesystem with ordered data mode. [4294676.387000] kjournald starting. Commit interval 5 seconds [4294678.352000] hw_random: RNG not detected [4294678.354000] Linux agpgart interface v0.101 (c) Dave Jones [4294678.355000] agpgart: Detected an Intel 915GM Chipset. [4294678.356000] agpgart: Detected 7932K stolen memory. [4294678.373000] agpgart: AGP aperture is 256M @ 0xc0000000 [4294678.441000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 177 [4294678.441000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [4294678.615000] Real Time Clock Driver v1.12ac [4294678.881000] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 16 (level, low) -> IRQ 177 [4294678.881000] Yenta: CardBus bridge found at 0000:06:03.0 [10cf:131e] [4294679.009000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 177 [4294679.009000] Socket status: 30000006 [4294679.009000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [4294679.009000] pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff [4294679.009000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff [4294679.040000] ieee80211_crypt: registered algorithm 'NULL' [4294679.051000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [4294679.051000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [4294679.093000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8 [4294679.093000] ipw2200: Copyright(c) 2003-2005 Intel Corporation [4294679.093000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 18 (level, low) -> IRQ 225 [4294679.094000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [4294679.600000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf8eb1, caps: 0xa04793/0x102000 [4294679.600000] serio: Synaptics pass-through port at isa0060/serio4/input0 [4294679.642000] input: SynPS/2 Synaptics TouchPad as /class/input/input1 [4294679.662000] input: PC Speaker as /class/input/input2 [4294679.676000] ipw2200: Radio Frequency Kill Switch is On: [4294679.676000] Kill switch must be turned off for wireless networking to work. [4294683.782000] Adding 1012052k swap on /dev/sda6. Priority:-1 extents:1 across:1012052k [4294683.806000] input: PS/2 Generic Mouse as /class/input/input3 [4294683.919000] EXT3 FS on sda2, internal journal [4294687.325000] mice: PS/2 mouse device common for all mice [4294688.118000] kjournald starting. Commit interval 5 seconds [4294688.119000] EXT3 FS on sda1, internal journal [4294688.119000] EXT3-fs: mounted filesystem with ordered data mode. [4294688.120000] kjournald starting. Commit interval 5 seconds [4294688.120000] EXT3 FS on sda5, internal journal [4294688.121000] EXT3-fs: mounted filesystem with ordered data mode. [4294688.122000] kjournald starting. Commit interval 5 seconds [4294688.122000] EXT3 FS on sda3, internal journal [4294688.123000] EXT3-fs: mounted filesystem with ordered data mode. [4295277.877000] PM: Preparing system for mem sleep [4295277.878000] Stopping tasks: ================| [4295277.880000] ata1: suspend device [4295278.897000] eth1: Going into suspend... [4295278.897000] ACPI: PCI interrupt for device 0000:06:05.0 disabled [4295278.908000] ACPI: PCI interrupt for device 0000:06:03.0 disabled [4295279.233000] ahci 0000:00:1f.2: suspend PCI device [4295279.233000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [4295279.244000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [4295279.255000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [4295279.255000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [4295279.255000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [4295279.255000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [4295279.255000] PM: Entering mem sleep [4295279.255000] Intel machine check architecture supported. [4295279.255000] Intel machine check reporting enabled on CPU#0. [4295279.255000] Back to C! [4295299.255000] irqrouter_resume: ENTER [4295299.255000] irqrouter_resume: EXIT [4295299.255000] PM: Finishing wakeup. [4295299.295000] ipw2200: Unable to load ucode: -22 [4295299.296000] ipw2200: Unable to load firmware: -22 [4295299.296000] ipw2200: Failed to up device [4295299.311000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 [4295299.312000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [4295299.312000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177 [4295299.312000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [4295299.312000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209 [4295299.312000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [4295299.312000] usb usb1: root hub lost power or was reset [4295299.312000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217 [4295299.312000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [4295299.312000] usb usb2: root hub lost power or was reset [4295299.312000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225 [4295299.313000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [4295299.313000] usb usb3: root hub lost power or was reset [4295299.313000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177 [4295299.313000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [4295299.313000] usb usb4: root hub lost power or was reset [4295299.324000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209 [4295299.324000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [4295299.324000] usb usb5: root hub lost power or was reset [4295299.328000] ehci_hcd 0000:00:1d.7: debug port 1 [4295299.328000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [4295299.332000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4295299.332000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [4295299.332000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 225 [4295299.332000] ahci 0000:00:1f.2: resume PCI device [4295299.343000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217 [4295299.343000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [4295299.523000] tg3: eth0: Link is down. [4295299.524000] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 16 (level, low) -> IRQ 177 [4295299.556000] eth1: Coming out of suspend... [4295299.567000] PCI: Enabling device 0000:06:05.0 (0000 -> 0002) [4295299.567000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 18 (level, low) -> IRQ 225 [4295299.567000] pnp: Failed to activate device 00:07. [4295299.567000] pnp: Failed to activate device 00:08. [4295300.327000] ata1: resume device [4295300.327000] ata_acpi_exec_tfs: ENTER: [4295300.327000] ata_acpi_exec_tfs: call get_GTF, ix=0 [4295300.327000] do_drive_get_GTF: ENTER: ap->id: 1, port#: 0, hard_port#: 0 [4295300.327000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xc17dff40 [4295300.327000] do_drive_get_GTF: returning gtf_length=14, gtf_address=0xf7edd1f0, obj_loc=0xf7edd1e0 [4295300.327000] ata_acpi_exec_tfs: call set_taskfiles, ix=0 [4295300.327000] do_drive_set_taskfiles: ENTER: ap->id: 1, port#: 0, hard_port#: 0 [4295300.327000] do_drive_set_taskfiles: total GTF bytes=14 (0xe), gtf_count=2, addr=0xf7edd1f0 [4295300.327000] taskfile_load_raw: (0x1f1-1f7): hex: 10 03 00 00 00 a0 ef [4295300.327000] call ata_exec_internal: [4295306.235000] irq 177: nobody cared (try booting with the "irqpoll" option) [4295306.235000] [] __report_bad_irq+0x24/0x90 [4295306.235000] [] note_interrupt+0x7f/0x290 [4295306.235000] [] handle_IRQ_event+0x33/0x70 [4295306.235000] [] __do_IRQ+0xe2/0x110 [4295306.235000] [] do_IRQ+0x23/0x40 [4295306.235000] [] common_interrupt+0x1a/0x20 [4295306.235000] [] acpi_processor_idle+0x1e1/0x31f [processor] [4295306.235000] [] cpu_idle+0x44/0x70 [4295306.235000] [] start_kernel+0x263/0x300 [4295306.235000] [] unknown_bootoption+0x0/0x270 [4295306.235000] handlers: [4295306.235000] [] (usb_hcd_irq+0x0/0x60 [usbcore]) [4295306.235000] [] (yenta_interrupt+0x0/0xc0 [yenta_socket]) [4295306.235000] Disabling IRQ #177 [4295309.567000] ipw2200: ipw-2.4-boot.fw load failed: Reason -2 [4295309.567000] ipw2200: Unable to load firmware: -2 [4295330.327000] ata1: qc timeout (cmd 0xef) [4295330.327000] taskfile_load_raw: ata_exec_internal failed: 1 [4295330.327000] taskfile_load_raw: (0x1f1-1f7): hex: 00 00 00 00 00 a0 f5 [4295330.327000] call ata_exec_internal: [4295360.327000] ata1: qc timeout (cmd 0xf5) [4295360.327000] taskfile_load_raw: ata_exec_internal failed: 1 [4295360.327000] ata_acpi_exec_tfs: call get_GTF, ix=1 [4295360.327000] do_drive_get_GTF: ENTER: ap->id: 1, port#: 0, hard_port#: 0 [4295360.327000] do_drive_get_GTF: ERR: ata_dev_present: 0, PORT_DISABLED: 0 [4295360.327000] ata_acpi_exec_tfs: get_GTF error (-19) [4295360.327000] ata_acpi_exec_tfs: ret=-19 [4295390.327000] ata1: qc timeout (cmd 0xef) [4295390.327000] ata1: failed to set xfermode, disabled [4295390.327000] ata1: dev 0 configured for UDMA/100 [4295394.560000] Restarting tasks... done [4295394.562000] sd 0:0:0:0: SCSI error: return code = 0x40000 [4295394.562000] end_request: I/O error, dev sda, sector 170082 [4295394.562000] sd 0:0:0:0: SCSI error: return code = 0x40000 [4295394.562000] end_request: I/O error, dev sda, sector 170090 [4295394.562000] sd 0:0:0:0: SCSI error: return code = 0x40000 [4295394.562000] end_request: I/O error, dev sda, sector 170098 [4295394.563000] sd 0:0:0:0: SCSI error: return code = 0x40000 [4295394.563000] end_request: I/O error, dev sda, sector 170106 [4295394.563000] Buffer I/O error on device sda2, logical block 1182 [4295394.563000] lost page write due to I/O error on sda2 [4295394.563000] Aborting journal on device sda2. [4295394.583000] ACPI Error (evevent-0312): No installed handler for fixed event [00000002] [20060127] [4295394.586000] ext3_abort called. [4295394.586000] EXT3-fs error (device sda2): ext3_journal_start_sb: Detected aborted journal [4295394.586000] Remounting filesystem read-only [4295394.982000] sd 0:0:0:0: SCSI error: return code = 0x40000 [4295394.982000] end_request: I/O error, dev sda, sector 14594970 [4295394.983000] sd 0:0:0:0: SCSI error: return code = 0x40000 [4295394.983000] end_request: I/O error, dev sda, sector 14594970 [4295394.983000] sd 0:0:0:0: SCSI error: return code = 0x40000 [4295394.983000] end_request: I/O error, dev sda, sector 14594970 --Boundary-00=_VG7+DPRKb3riIt3 Content-Type: text/plain; charset="utf-8"; name="lspci" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lspci" 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04) Subsystem: Fujitsu Limited.: Unknown device 12d7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] #09 [2109] 0000:00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) (prog-if 00 [VGA]) Subsystem: Fujitsu Limited.: Unknown device 12de Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at b0080000 (32-bit, non-prefetchable) [size=512K] I/O ports at 1400 [size=8] Memory at c0000000 (32-bit, prefetchable) [size=256M] Memory at b0040000 (32-bit, non-prefetchable) [size=256K] Capabilities: [d0] Power Management version 2 0000:00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) Subsystem: Fujitsu Limited.: Unknown device 12de Flags: fast devsel Memory at 52000000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: [d0] Power Management version 2 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) Subsystem: Fujitsu Limited.: Unknown device 1326 Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at b0000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [70] #10 [0091] 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: b0100000-b01fffff Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited.: Unknown device 12e8 Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at 1420 [size=32] 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited.: Unknown device 12e8 Flags: bus master, medium devsel, latency 0, IRQ 217 I/O ports at 1440 [size=32] 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited.: Unknown device 12e8 Flags: bus master, medium devsel, latency 0, IRQ 225 I/O ports at 1460 [size=32] 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI]) Subsystem: Fujitsu Limited.: Unknown device 12e8 Flags: bus master, medium devsel, latency 0, IRQ 177 I/O ports at 1480 [size=32] 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI]) Subsystem: Fujitsu Limited.: Unknown device 12e9 Flags: bus master, medium devsel, latency 0, IRQ 209 Memory at b0004000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] #0a [20a0] 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=07, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0200000-b02fffff Prefetchable memory behind bridge: 0000000050000000-0000000051f00000 Capabilities: [50] #0d [0000] 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) Subsystem: Fujitsu Limited.: Unknown device 12e4 Flags: bus master, medium devsel, latency 0 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Limited.: Unknown device 12e5 Flags: bus master, medium devsel, latency 0, IRQ 225 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at 1410 [size=16] 0000:00:1f.2 0106: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04) (prog-if 01) Subsystem: Fujitsu Limited.: Unknown device 12e6 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 217 I/O ports at 14b8 [size=8] I/O ports at 140c [size=4] I/O ports at 14b0 [size=8] I/O ports at 1408 [size=4] I/O ports at 14a0 [size=16] Memory at b0004400 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) Subsystem: Fujitsu Limited.: Unknown device 12e7 Flags: medium devsel, IRQ 11 I/O ports at 14c0 [size=32] 0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 21) Subsystem: Fujitsu Limited.: Unknown device 1300 Flags: bus master, fast devsel, latency 0, IRQ 233 Memory at b0100000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable+ Capabilities: [d0] #10 [0001] 0000:06:03.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 20) Subsystem: Fujitsu Limited.: Unknown device 131e Flags: bus master, stepping, slow devsel, latency 168, IRQ 177 Memory at b0206000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 50000000-51fff000 (prefetchable) Memory window 1: 54000000-55fff000 I/O window 0: 00002000-000020ff I/O window 1: 00002400-000024ff 16-bit legacy interface ports at 0001 0000:06:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05) Subsystem: Intel Corporation: Unknown device 2702 Flags: bus master, medium devsel, latency 32, IRQ 225 Memory at b0204000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 0000:06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Fujitsu Limited.: Unknown device 1162 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at b0205000 (32-bit, non-prefetchable) [size=2K] Memory at b0200000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 --Boundary-00=_VG7+DPRKb3riIt3 Content-Type: text/plain; charset="utf-8"; name="bootfail-log-ahci.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="bootfail-log-ahci.txt" [4295868.027000] ahci 0000:00:1f.2: version 1.2 [4295868.027000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217 [4295872.339000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [4295872.339000] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode [4295872.339000] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part [4295872.339000] ata11: SATA max UDMA/133 cmd 0xF8860500 ctl 0x0 bmdma 0x0 irq 217 [4295872.339000] ata12: SATA max UDMA/133 cmd 0xF8860580 ctl 0x0 bmdma 0x0 irq 217 [4295872.339000] ata13: SATA max UDMA/133 cmd 0xF8860600 ctl 0x0 bmdma 0x0 irq 217 [4295872.339000] ata14: SATA max UDMA/133 cmd 0xF8860680 ctl 0x0 bmdma 0x0 irq 217 [4295872.541000] ata11: SATA link up 1.5 Gbps (SStatus 113) [4295872.541000] ata11: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:346b 86:bf09 87:6063 88:203f [4295872.541000] ata11: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48 [4295872.543000] ata11: dev 0 configured for UDMA/100 [4295872.543000] scsi16 : ahci [4295872.746000] ata12: SATA link down (SStatus 0) [4295872.746000] scsi17 : ahci [4295872.948000] ata13: SATA link down (SStatus 0) [4295872.948000] scsi18 : ahci [4295873.150000] ata14: SATA link down (SStatus 0) [4295873.150000] scsi19 : ahci [4295873.161000] Vendor: ATA Model: FUJITSU MHV2080B Rev: 0000 [4295873.162000] Type: Direct-Access ANSI SCSI revision: 05 [4295873.163000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4295873.163000] sda: Write Protect is off [4295873.163000] sda: Mode Sense: 00 3a 00 10 [4295873.163000] SCSI device sda: drive cache: write back w/ FUA [4295873.163000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4295873.163000] sda: Write Protect is off [4295873.163000] sda: Mode Sense: 00 3a 00 10 [4295873.163000] SCSI device sda: drive cache: write back w/ FUA [4295873.163000] sda:<4>ata11: port reset, p_is 40000001 is 1 pis 0 cmd 4017 tf 451 ss 113 se 0 [4295873.164000] ata11: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [4295873.164000] ata11: status=0x51 { DriveReady SeekComplete Error } [4295873.164000] ata11: error=0x04 { DriveStatusError } [4295873.164000] ata11: port reset, p_is 40000001 is 1 pis 0 cmd c017 tf 451 ss 113 se 0 [4295873.164000] ata11: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [4295873.164000] ata11: status=0x51 { DriveReady SeekComplete Error } [4295873.164000] ata11: error=0x04 { DriveStatusError } [4295873.165000] ata11: port reset, p_is 40000001 is 1 pis 0 cmd c017 tf 451 ss 113 se 0 [4295873.165000] ata11: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [4295873.165000] ata11: status=0x51 { DriveReady SeekComplete Error } [4295873.165000] ata11: error=0x04 { DriveStatusError } [4295873.166000] ata11: port reset, p_is 40000001 is 1 pis 0 cmd c017 tf 451 ss 113 se 0 [4295873.166000] ata11: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [4295873.166000] ata11: status=0x51 { DriveReady SeekComplete Error } [4295873.166000] ata11: error=0x04 { DriveStatusError } [4295873.167000] ata11: port reset, p_is 40000001 is 1 pis 0 cmd c017 tf 451 ss 113 se 0 [4295873.167000] ata11: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [4295873.167000] ata11: status=0x51 { DriveReady SeekComplete Error } [4295873.167000] ata11: error=0x04 { DriveStatusError } [4295873.168000] sd 16:0:0:0: SCSI error: return code = 0x8000002 [4295873.168000] sda: Current: sense key: Aborted Command [4295873.168000] Additional sense: No additional sense information [4295873.168000] end_request: I/O error, dev sda, sector 0 [4295873.168000] Buffer I/O error on device sda, logical block 0 [4295873.168000] ata11: port reset, p_is 40000001 is 1 pis 0 cmd c017 tf 451 ss 113 se 0 [4295873.168000] ata11: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [4295873.168000] ata11: status=0x51 { DriveReady SeekComplete Error } [4295873.168000] ata11: error=0x04 { DriveStatusError } [4295873.169000] ata11: port reset, p_is 40000001 is 1 pis 0 cmd c017 tf 451 ss 113 se 0 [4295873.169000] ata11: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [4295873.169000] ata11: status=0x51 { DriveReady SeekComplete Error } [4295873.169000] ata11: error=0x04 { DriveStatusError } [4295873.170000] ata11: port reset, p_is 40000001 is 1 pis 0 cmd c017 tf 451 ss 113 se 0 [4295873.170000] ata11: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [4295873.170000] ata11: status=0x51 { DriveReady SeekComplete Error } [4295873.170000] ata11: error=0x04 { DriveStatusError } [4295873.171000] ata11: port reset, p_is 40000001 is 1 pis 0 cmd c017 tf 451 ss 113 se 0 [4295873.171000] ata11: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [4295873.171000] ata11: status=0x51 { DriveReady SeekComplete Error } [4295873.171000] ata11: error=0x04 { DriveStatusError } [4295873.172000] ata11: port reset, p_is 40000001 is 1 pis 0 cmd c017 tf 451 ss 113 se 0 [4295873.172000] ata11: translated ATA stat/err 0x51/04 to SCSI SK/ASC/ASCQ 0xb/00/00 [4295873.172000] ata11: status=0x51 { DriveReady SeekComplete Error } [4295873.172000] ata11: error=0x04 { DriveStatusError } [4295873.173000] sd 16:0:0:0: SCSI error: return code = 0x8000002 [4295873.173000] sda: Current: sense key: Aborted Command [4295873.173000] Additional sense: No additional sense information [4295873.174000] end_request: I/O error, dev sda, sector 0 [4295873.174000] Buffer I/O error on device sda, logical block 0 [4295873.174000] unable to read partition table [4295873.174000] sd 16:0:0:0: Attached scsi disk sda --Boundary-00=_VG7+DPRKb3riIt3-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/