Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <1584133954-6953-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
 <1584133954-6953-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
 <20200319124452.3yfcvq754vi4q2rv@gilmour.lan> <20200319130348.GC4872@pendragon.ideasonboard.com>
 <CA+V-a8s-GZsYuBLyGnzURZfGD42f0c+QEan6FSwb2ew1=7Gj3g@mail.gmail.com> <20200324154045.whiy6uvlg2mrjv5a@gilmour.lan>
In-Reply-To: <20200324154045.whiy6uvlg2mrjv5a@gilmour.lan>
From:   "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Date:   Tue, 24 Mar 2020 16:04:43 +0000
Message-ID: <CA+V-a8tMVoJOdgM_S0sJ0WEGhwBirCC4mi-TtxLCn1SKVXXiBQ@mail.gmail.com>
Subject: Re: [PATCH v3 1/4] media: dt-bindings: media: i2c: Switch to assigned-clock-rates
To:     Maxime Ripard <maxime@cerno.tech>
Cc:     Mark Rutland <mark.rutland@arm.com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Ezequiel Garcia <ezequiel@collabora.com>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Magnus Damm <magnus.damm@gmail.com>,
        Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
        LKML <linux-kernel@vger.kernel.org>,
        Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Geert Uytterhoeven <geert@linux-m68k.org>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Sakari Ailus <sakari.ailus@linux.intel.com>,
        Shawn Guo <shawnguo@kernel.org>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Fabio Estevam <festevam@gmail.com>,
        linux-media <linux-media@vger.kernel.org>,
        LAK <linux-arm-kernel@lists.infradead.org>,
        NXP Linux Team <linux-imx@nxp.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Maxime,

On Tue, Mar 24, 2020 at 3:40 PM Maxime Ripard <maxime@cerno.tech> wrote:
>
> On Thu, Mar 19, 2020 at 01:17:51PM +0000, Lad, Prabhakar wrote:
> > Hi Laurent,
> >
> > On Thu, Mar 19, 2020 at 1:04 PM Laurent Pinchart
> > <laurent.pinchart@ideasonboard.com> wrote:
> > >
> > > Hi Maxime,
> > >
> > > On Thu, Mar 19, 2020 at 01:44:52PM +0100, Maxime Ripard wrote:
> > > > On Fri, Mar 13, 2020 at 09:12:31PM +0000, Lad Prabhakar wrote:
> > > > > Use assigned-clock-rates to specify the clock rate. Also mark
> > > > > clock-frequency property as deprecated.
> > > > >
> > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > > > ---
> > > > >  Documentation/devicetree/bindings/media/i2c/ov5645.txt | 5 +++--
> > > > >  1 file changed, 3 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> > > > > index 72ad992..e62fe82 100644
> > > > > --- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> > > > > +++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> > > > > @@ -8,7 +8,7 @@ Required Properties:
> > > > >  - compatible: Value should be "ovti,ov5645".
> > > > >  - clocks: Reference to the xclk clock.
> > > > >  - clock-names: Should be "xclk".
> > > > > -- clock-frequency: Frequency of the xclk clock.
> > > > > +- clock-frequency (deprecated): Frequency of the xclk clock.
> > > > >  - enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
> > > > >    to the hardware pin PWDNB which is physically active low.
> > > > >  - reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
> > > > > @@ -37,7 +37,8 @@ Example:
> > > > >
> > > > >                     clocks = <&clks 200>;
> > > > >                     clock-names = "xclk";
> > > > > -                   clock-frequency = <24000000>;
> > > > > +                   assigned-clocks = <&clks 200>;
> > > > > +                   assigned-clock-rates = <24000000>;
> > > > >
> > > > >                     vdddo-supply = <&camera_dovdd_1v8>;
> > > > >                     vdda-supply = <&camera_avdd_2v8>;
> > > >
> > > > clock-frequency is quite different from assigned-clock-rates though,
> > > > semantically speaking. clock-frequency is only about what the clock
> > > > frequency is, while assigned-clock-rates will change the rate as well,
> > > > and you have no idea how long it will last.
> > >
> > > The driver currently reads the clock-frequency property and then calls
> > > clk_set_rate(). I agree tht assigned-clock-rates isn't a panacea, but I
> > > think it's less of a hack than what we currently have.
> > >
> > > As discussed on IRC, maybe the best option in this specific case is to
> > > drop clock-frequency and assigned-clok-rates, and call clk_set_rate()
> > > with a hardcoded frequency of 24MHz in the driver, as that's the only
> > > frequency the driver supports.
> > >
> > Does this mean any driver which has a fixed clock requirement shouldn't be a
> > DT property and should be just handled by the drivers internally ?
>
> It's hard to give a generic policy, but here, the hardware is pretty
> flexible since it can deal with anything between 6MHz to 50-something
> MHz, it's the driver that chooses to enforce a 24MHz and be pedantic
> about it, so it's up to the driver to enforce that policy, not to the
> DT since it's essentially a software limitation, not a hardware one.
>
Thank you for the clarification, Ill drop patches 1-4 from this series.

Cheers,
--Prabhakar

> Maxime
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel