Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
IronPort-SDR: aZ42MfS75Pkb1C+d361VhhQ3vxZ6dXhqnPgJacCdpHWc7EZ217OmLTlSzpKdhLAZ/eXKYOYcP6
 gUeeXf41azng==
IronPort-SDR: DOHsqqlJmd7yzNGn4yF4uvvKUqRhx64AwYe/CqKQdx1qSYoELmQVh0DA3KP0s3avq2LHceqkv/
 2d9B0vMel4ZA==
Date:   Wed, 25 Mar 2020 16:42:40 +0200
From:   Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To:     Heiko =?iso-8859-1?Q?St=FCbner?= <heiko@sntech.de>
Cc:     Lukas Wunner <lukas@wunner.de>, gregkh@linuxfoundation.org,
        jslaby@suse.com, matwey.kornilov@gmail.com,
        linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/7] serial: 8250: Add rs485 emulation to 8250_dw
Message-ID: <20200325144240.GF1922688@smile.fi.intel.com>
References: <20200318142640.982763-1-heiko@sntech.de>
 <20200323131714.vmhjws5xpj6yf536@wunner.de>
 <20200323134106.GL1922688@smile.fi.intel.com>
 <1688171.mLF46rTMEE@diego>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <1688171.mLF46rTMEE@diego>
Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Wed, Mar 25, 2020 at 02:41:50PM +0100, Heiko St?bner wrote:
> Am Montag, 23. M?rz 2020, 14:41:06 CET schrieb Andy Shevchenko:
> > On Mon, Mar 23, 2020 at 02:17:14PM +0100, Lukas Wunner wrote:
> > > On Mon, Mar 23, 2020 at 09:25:57AM +0100, Heiko St?bner wrote:
> > > > Am Donnerstag, 19. M?rz 2020, 06:40:34 CET schrieb Lukas Wunner:
> > 
> > > "rs485-re-gpios" seems a bit cryptic, how about "rs485-rx-enable-gpios"
> > > or "rs485-full-duplex-gpios"?
> > 
> > First is in align with well established pin name, second is its elaboration,
> > I'm for any, but last.
> 
> So I guess the intersection of both your preferences
> is "rs485-rx-enable-gpios" ... and I did go with that ;-)


> I've now moved my rs485 things over to tty-next + taking
> 	- "serial: Allow uart_get_rs485_mode() to return errno"
> 	- "serial: 8250: Support rs485 bus termination GPIO"
> from Lukas' git-tree + fixing other things according to review comments.
> 
> I guess I'll now just sit on things till after the 5.7 merge window for
> the depending patches to get posted.

Sounds like a plan, thank you!

Or you can post anyway and resend after merge window. People will have a chance
to look at this.

-- 
With Best Regards,
Andy Shevchenko