Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   afzal mohammed <afzal.mohd.ma@gmail.com>
To:     Arnd Bergmann <arnd@arndb.de>, SoC Team <soc@kernel.org>
Cc:     afzal mohammed <afzal.mohd.ma@gmail.com>,
        Thomas Gleixner <tglx@linutronix.de>,
        Tony Lindgren <tony@atomide.com>,
        Alexander Sverdlin <alexander.sverdlin@gmail.com>,
        =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= <khalasa@piap.pl>,
        Viresh Kumar <viresh.kumar@linaro.org>,
        Lubomir Rintel <lkundrak@v3.sk>,
        Gregory CLEMENT <gregory.clement@bootlin.com>,
        Hartley Sweeten <hsweeten@visionengravers.com>,
        Viresh Kumar <vireshk@kernel.org>,
        Shiraz Hashim <shiraz.linux.kernel@gmail.com>,
        Andrew Lunn <andrew@lunn.ch>,
        Jason Cooper <jason@lakedaemon.net>,
        Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        Linux ARM <linux-arm-kernel@lists.infradead.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        arm-soc <arm@kernel.org>, Olof Johansson <olof@lixom.net>
Subject: [PATCH v4 4/5] ARM: mmp: replace setup_irq() by request_irq()
Date:   Fri, 27 Mar 2020 18:14:37 +0530
Message-Id: <20200327124437.4239-1-afzal.mohd.ma@gmail.com>
In-Reply-To: <CAK8P3a2sqika7=3D6Zgkz+v8HtGEc0q0+skWG8mSKuL+qSoYLw@mail.gmail.com>
References: <CAK8P3a2sqika7=3D6Zgkz+v8HtGEc0q0+skWG8mSKuL+qSoYLw@mail.gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
---

v4:
 * Add received tags

v3:
 * Split out from series, also split out from ARM patch to subarch level
	as Thomas suggested to take it thr' respective maintainers
 * Modify string displayed in case of error as suggested by Thomas
 * Re-arrange code as required to improve readability
 * Remove irrelevant parts from commit message & improve
 
v2:
 * Replace pr_err("request_irq() on %s failed" by
           pr_err("%s: request_irq() failed"
 * Commit message massage

 arch/arm/mach-mmp/time.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index c65cfc1ad99b..049a65f47b42 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -175,13 +175,6 @@ static void __init timer_config(void)
 	__raw_writel(0x2, mmp_timer_base + TMR_CER);
 }
 
-static struct irqaction timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= timer_interrupt,
-	.dev_id		= &ckevt,
-};
-
 void __init mmp_timer_init(int irq, unsigned long rate)
 {
 	timer_config();
@@ -190,7 +183,9 @@ void __init mmp_timer_init(int irq, unsigned long rate)
 
 	ckevt.cpumask = cpumask_of(0);
 
-	setup_irq(irq, &timer_irq);
+	if (request_irq(irq, timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"timer", &ckevt))
+		pr_err("Failed to request irq %d (timer)\n", irq);
 
 	clocksource_register_hz(&cksrc, rate);
 	clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
-- 
2.25.1