Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Anson Huang <Anson.Huang@nxp.com>
To:     robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
        kernel@pengutronix.de, festevam@gmail.com,
        andrew.smirnov@gmail.com, manivannan.sadhasivam@linaro.org,
        michael@walle.cc, rjones@gateworks.com,
        marcel.ziswiler@toradex.com, sebastien.szymanski@armadeus.com,
        jon@solid-run.com, cosmin.stoica@nxp.com, l.stach@pengutronix.de,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org
Cc:     Linux-imx@nxp.com
Subject: [PATCH 1/3] arm64: dts: imx: Add imx8dxl support
Date:   Sat, 28 Mar 2020 19:13:33 +0800
Message-Id: <1585394015-27825-1-git-send-email-Anson.Huang@nxp.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

i.MX8DXL is a dual Cortex-A35 proccessor with Cortex-M4 system controller
inside. Add the SoC dtsi file support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
This patch needs pads-imx8dxl.h which is in below patch series:
	https://patchwork.kernel.org/patch/11462211/
---
 arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 416 +++++++++++++++++++++++++++++
 1 file changed, 416 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
new file mode 100644
index 0000000..4d4b287
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020 NXP
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/pads-imx8dxl.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpio0 = &lsio_gpio0;
+		gpio1 = &lsio_gpio1;
+		gpio2 = &lsio_gpio2;
+		gpio3 = &lsio_gpio3;
+		gpio4 = &lsio_gpio4;
+		gpio5 = &lsio_gpio5;
+		gpio6 = &lsio_gpio6;
+		gpio7 = &lsio_gpio7;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mu1 = &lsio_mu1;
+		serial0 = &adma_lpuart0;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/* We have 1 clusters with 2 Cortex-A35 cores */
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_A35_CLK>;
+			operating-points-v2 = <&a35_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_A35_CLK>;
+			operating-points-v2 = <&a35_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	a35_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	scu {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0", "tx1", "tx2", "tx3",
+			     "rx0", "rx1", "rx2", "rx3",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 0 1
+			  &lsio_mu1 0 2
+			  &lsio_mu1 0 3
+			  &lsio_mu1 1 0
+			  &lsio_mu1 1 1
+			  &lsio_mu1 1 2
+			  &lsio_mu1 1 3
+			  &lsio_mu1 3 3>;
+
+		clk: clock-controller {
+			compatible = "fsl,imx8dxl-clk", "fsl,imx8qxp-clk";
+			#clock-cells = <1>;
+			clocks = <&xtal32k &xtal24m>;
+			clock-names = "xtal_32KHz", "xtal_24Mhz";
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8dxl-iomuxc";
+		};
+
+		ocotp: imx8qx-ocotp {
+			compatible = "fsl,imx8dxl-scu-ocotp", "fsl,imx8qxp-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		pd: imx8qx-pd {
+			compatible = "fsl,imx8dxl-scu-pd", "fsl,imx8qxp-scu-pd";
+			#power-domain-cells = <1>;
+		};
+
+		scu_key: scu-key {
+			compatible = "fsl,imx8dxl-sc-key", "fsl,imx-sc-key";
+			linux,keycodes = <KEY_POWER>;
+			status = "disabled";
+		};
+
+		rtc: rtc {
+			compatible = "fsl,imx8dxl-sc-wdt", "fsl,imx8qxp-sc-rtc";
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8dxl-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+
+		watchdog {
+			compatible = "fsl,imx8dxl-sc-wdt", "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	xtal32k: clock-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32KHz";
+	};
+
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	adma_subsys: bus@59000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x59000000 0x0 0x59000000 0x2000000>;
+
+		adma_lpcg: clock-controller@59000000 {
+			compatible = "fsl,imx8dxl-lpcg-adma", "fsl,imx8qxp-lpcg-adma";
+			reg = <0x59000000 0x2000000>;
+			#clock-cells = <1>;
+		};
+
+		adma_lpuart0: serial@5a060000 {
+			compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+			reg = <0x5a060000 0x1000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
+				 <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
+			clock-names = "ipg", "baud";
+			power-domains = <&pd IMX_SC_R_UART_0>;
+			status = "disabled";
+		};
+	};
+
+	conn_subsys: bus@5b000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
+
+		conn_lpcg: clock-controller@5b200000 {
+			compatible = "fsl,imx8dxl-lpcg-conn", "fsl,imx8qxp-lpcg-conn";
+			reg = <0x5b200000 0xb0000>;
+			#clock-cells = <1>;
+		};
+
+		usdhc1: mmc@5b010000 {
+			compatible = "fsl,imx8dxl-usdhc", "fsl,imx7d-usdhc";
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x5b010000 0x10000>;
+			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
+				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
+				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
+			clock-names = "ipg", "per", "ahb";
+			power-domains = <&pd IMX_SC_R_SDHC_0>;
+			status = "disabled";
+		};
+
+		usdhc2: mmc@5b020000 {
+			compatible = "fsl,imx8dxl-usdhc", "fsl,imx7d-usdhc";
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x5b020000 0x10000>;
+			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
+				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
+				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
+			clock-names = "ipg", "per", "ahb";
+			power-domains = <&pd IMX_SC_R_SDHC_1>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step= <2>;
+			status = "disabled";
+		};
+	};
+
+	lsio_subsys: bus@5d000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
+
+		lsio_gpio0: gpio@5d080000 {
+			compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+			reg = <0x5d080000 0x10000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&pd IMX_SC_R_GPIO_0>;
+		};
+
+		lsio_gpio1: gpio@5d090000 {
+			compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+			reg = <0x5d090000 0x10000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&pd IMX_SC_R_GPIO_1>;
+		};
+
+		lsio_gpio2: gpio@5d0a0000 {
+			compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+			reg = <0x5d0a0000 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&pd IMX_SC_R_GPIO_2>;
+		};
+
+		lsio_gpio3: gpio@5d0b0000 {
+			compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+			reg = <0x5d0b0000 0x10000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&pd IMX_SC_R_GPIO_3>;
+		};
+
+		lsio_gpio4: gpio@5d0c0000 {
+			compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+			reg = <0x5d0c0000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&pd IMX_SC_R_GPIO_4>;
+		};
+
+		lsio_gpio5: gpio@5d0d0000 {
+			compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+			reg = <0x5d0d0000 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&pd IMX_SC_R_GPIO_5>;
+		};
+
+		lsio_gpio6: gpio@5d0e0000 {
+			compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+			reg = <0x5d0e0000 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&pd IMX_SC_R_GPIO_6>;
+		};
+
+		lsio_gpio7: gpio@5d0f0000 {
+			compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+			reg = <0x5d0f0000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			power-domains = <&pd IMX_SC_R_GPIO_7>;
+		};
+
+		lsio_mu0: mailbox@5d1b0000 {
+			compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
+			reg = <0x5d1b0000 0x10000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		lsio_mu1: mailbox@5d1c0000 {
+			compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
+			reg = <0x5d1c0000 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		lsio_mu2: mailbox@5d1d0000 {
+			compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
+			reg = <0x5d1d0000 0x10000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		lsio_mu3: mailbox@5d1e0000 {
+			compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
+			reg = <0x5d1e0000 0x10000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		lsio_mu4: mailbox@5d1f0000 {
+			compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
+			reg = <0x5d1f0000 0x10000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			status = "disabled";
+		};
+
+		lsio_lpcg: clock-controller@5d400000 {
+			compatible = "fsl,imx8dxl-lpcg-lsio", "fsl,imx8qxp-lpcg-lsio";
+			reg = <0x5d400000 0x400000>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
-- 
2.7.4