Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   George Hilliard <thirtythreeforty@gmail.com>
To:     Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>
Cc:     Icenowy Zheng <icenowy@aosc.io>, linux-usb@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        George Hilliard <thirtythreeforty@gmail.com>
Subject: [PATCH v2 4/5] ARM: suniv: add USB-related device nodes
Date:   Tue, 31 Mar 2020 12:02:18 -0500
Message-Id: <20200331170219.267732-5-thirtythreeforty@gmail.com>
In-Reply-To: <20200331170219.267732-1-thirtythreeforty@gmail.com>
References: <20200331170219.267732-1-thirtythreeforty@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Icenowy Zheng <icenowy@aosc.io>

The suniv SoC has a USB OTG controller and a USB PHY like other
Allwinner SoCs.

Add their device tree node.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: George Hilliard <thirtythreeforty@gmail.com>
---
 arch/arm/boot/dts/suniv-f1c100s.dtsi | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 6100d3b75f61..ec9f248ba889 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -4,6 +4,9 @@
  * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
  */
 
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -140,5 +143,31 @@ uart2: serial@1c25800 {
 			resets = <&ccu 26>;
 			status = "disabled";
 		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
 	};
 };
-- 
2.26.0