Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 21 Oct 2001 06:54:53 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 21 Oct 2001 06:54:43 -0400 Received: from twilight.cs.hut.fi ([130.233.40.5]:3599 "EHLO twilight.cs.hut.fi") by vger.kernel.org with ESMTP id ; Sun, 21 Oct 2001 06:54:29 -0400 Date: Sun, 21 Oct 2001 13:54:55 +0300 From: Ville Herva To: linux-kernel@vger.kernel.org Subject: 2.4.10ac10, cdrecord 1.9-6, Mitsumi CR-4804TE: lock up burning too large image Message-ID: <20011021135455.C1598@niksula.cs.hut.fi> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org When (accidentally) trying to burn ~670MB onto a 74" cdr disk, I experienced a complete lock up. It went to 99% (as one would expect), and then drive began giving weird sounds - as if it was moving the head from start to end over and over. After a short while, the whole system locked up, no mouse, keyboard, caps lock, ctrl-alt-del, alt-sysrq-{s,u,b}. It used to give a nice error when disk size was exceeded with 2.2.18pre19 and a tad older cdrecord (1.9-something (1.10-4 failed on 2.2 BTW, giving error on mmapping /dev/null)). I assume this is a kernel thing... BTW: Also the cd audio ripping speed has dropped from ~8x to ~1x with both my cdrw and cd drive. The drop took place before upgrading from 2.2 to 2.4. I am and was using scsi-emulation for both drives. I tried going back to older cdparanoia, but it didn't help. Before I try to binary search what has changed, does anybody have any ideas on what to try? ------------------------------------------------------------------------ kernel 2.4.10-ac10 SMP cdrecord 1.9-6 dmesg: scsi : 0 hosts left. SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MITSUMI Model: CR-4804TE Rev: 2.4C Type: CD-ROM ANSI SCSI revision: 02 APIC error on CPU0: 08(02) Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray hdparm /dev/hdd: /dev/hdd: HDIO_GET_MULTCOUNT failed: Input/output error I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) HDIO_GET_NOWERR failed: Input/output error readonly = 0 (off) BLKRAGET failed: Input/output error HDIO_GETGEO failed: Invalid argument cdrecord -scanbus: 0,1,0 1) 'MITSUMI ' 'CR-4804TE ' '2.4C' Removable CD-ROM kernel messages before the lockup: Oct 20 20:35:53 kernel: scsi : aborting command due to timeout : pid 155966, @+scsi0, channel 0, id 1, lun 0 0x2a 00 00 05 48 9e 00 00 1f 00 Oct 20 20:35:53 kernel: hdd: timeout waiting for DMA Oct 20 20:35:53 kernel: ide_dmaproc: chipset supported ide_dma_timeout func @+only: 14 Oct 20 20:35:54 kernel: hdd: status timeout: status=0xd0 { Busy } Oct 20 20:35:54 kernel: hdd: drive not ready for command Oct 20 20:36:28 kernel: hdd: ATAPI reset timed-out, status=0xd0 -- v -- v@iki.fi - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/