Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751184AbWB0NFg (ORCPT ); Mon, 27 Feb 2006 08:05:36 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751226AbWB0NFg (ORCPT ); Mon, 27 Feb 2006 08:05:36 -0500 Received: from mxout5.netvision.net.il ([194.90.9.29]:54121 "EHLO mxout5.netvision.net.il") by vger.kernel.org with ESMTP id S1751184AbWB0NFf (ORCPT ); Mon, 27 Feb 2006 08:05:35 -0500 Date: Mon, 27 Feb 2006 15:05:26 +0300 From: Maxim Kozover Subject: problems with scsi_transport_fc and qla2xxx To: linux-kernel@vger.kernel.org Reply-to: Maxim Kozover Message-id: <1413265398.20060227150526@netvision.net.il> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT X-Priority: 3 (Normal) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1105 Lines: 29 Hi! I'm checking 2.6.16-rc5 with 2 QLogic 2312 adapters using qla2xxx driver from 2.6.16-rc5. As with earlier kernels, I think > 2.6.12 (since scsi_transport_fc gained functionality) I have the following problem. 2 scsi hosts available, 4 and 5 (for QLogic). I disconnect the cable from one of QLogic cards. After timeout I have the message rport-4:0-0: blocked FC remote port time out: removing target and saving binding and appropriate SCSI devices that came from adapter 4 disappear from /proc/scsi/scsi. So far, so good. I reconnect the cable, the directory /sys/class/fc_remote_ports/rport-4:0-1 appears along with the old ones rport-4:0-0 and rport-5:0-0, so currently I have 3. However, no automatic rescan appears on adapter 4. What's worse, if I try echo "0 1 0" > /sys/class/scsi_host/host4/scan the process is stuck. Please advise. Thanks, Maxim. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/