Received-SPF: neutral (google.com: 209.132.180.67 is neither permitted nor denied by best guess record for domain of linux-kernel-owner@vger.kernel.org) client-ip=209.132.180.67;
Date:   Sun, 12 Apr 2020 19:03:36 +0200
From:   Clemens Gruber <clemens.gruber@pqgruber.com>
To:     Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc:     Jakub Kicinski <kuba@kernel.org>, netdev@vger.kernel.org,
        Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        "David S . Miller" <davem@davemloft.net>,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH] net: phy: marvell: Fix pause frame negotiation
Message-ID: <20200412170336.GA1826@workstation.tuxnet>
References: <20200408214326.934440-1-clemens.gruber@pqgruber.com>
 <20200410174304.22f812fd@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com>
 <20200411091705.GG25745@shell.armlinux.org.uk>
 <20200411132401.GA273086@workstation.tuxnet>
 <20200411134344.GI25745@shell.armlinux.org.uk>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20200411134344.GI25745@shell.armlinux.org.uk>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Sat, Apr 11, 2020 at 02:43:44PM +0100, Russell King - ARM Linux admin wrote:
> The fiber code is IMHO very suspect; the decoding of the pause status
> seems to be completely broken. However, I'm not sure whether anyone
> actually uses that or not, so I've been trying not to touch it.

If the following table for the link partner advertisement is correct..
PAUSE           ASYM_PAUSE      MEANING
0               0               Link partner has no pause frame support
0               1               <-  Link partner can TX pause frames
1               0               <-> Link partner can RX and TX pauses
1               1                -> Link partner can RX pause frames

..then I think both pause and asym_pause have to be assigned
independently, like this:
phydev->pause = !!(lpa & LPA_1000XPAUSE);
phydev->asym_pause = !!(lpa & LPA_1000XPAUSE_ASYM);

(Using the defines from uapi mii.h instead of the redundant/combined
LPA_PAUSE_FIBER etc. which can then be removed from marvell.c)

Currently, if LPA_1000XPAUSE_ASYM is set we do pause=1 and asym_pause=1
no matter if LPA_1000XPAUSE is set. This could lead us to mistake a link
partner who can only send for one who can only receive pause frames.
^ Was this the problem you meant?

I saw that for the copper case and in other drivers, we first set the
ETHTOOL_LINK_MODE_(Asym_)Pause_BIT bit in lp_advertising and then set
phydev->(asym_)pause depending on the ETHTOOL_LINK_MODE_... bit.
Do you agree that we should also set the ETHTOOL_ bits in the fiber
case?

Does anybody have access to a Marvell PHY with 1000base-X Ethernet?
(I only have a 88E1510 + 1000Base-T at the home office)

Thanks,
Clemens