Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Robert Marko <robert.marko@sartura.hr>
To:     andrew@lunn.ch, f.fainelli@gmail.com, hkallweit1@gmail.com,
        linux@armlinux.org.uk, linux-kernel@vger.kernel.org,
        netdev@vger.kernel.org, agross@kernel.org,
        bjorn.andersson@linaro.org, robh+dt@kernel.org,
        mark.rutland@arm.com, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org
Cc:     Robert Marko <robert.marko@sartura.hr>,
        Christian Lamparter <chunkeey@gmail.com>,
        Luka Perkov <luka.perkov@sartura.hr>
Subject: [PATCH 3/3] dts: ipq4019: add MDIO node
Date:   Mon, 13 Apr 2020 19:01:07 +0200
Message-Id: <20200413170107.246509-3-robert.marko@sartura.hr>
In-Reply-To: <20200413170107.246509-1-robert.marko@sartura.hr>
References: <20200413170107.246509-1-robert.marko@sartura.hr>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This patch adds the necessary MDIO interface node
to the Qualcomm IPQ4019 DTSI.

Built-in QCA8337N switch is managed using it,
and since we have a driver for it lets add it.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index b4803a428340..80d0a69e9fed 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -578,6 +578,34 @@ wifi1: wifi@a800000 {
 			status = "disabled";
 		};
 
+		mdio: mdio@90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "qcom,ipq40xx-mdio";
+			reg = <0x90000 0x64>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+
+			ethphy4: ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
 		usb3_ss_phy: ssphy@9a000 {
 			compatible = "qcom,usb-ss-ipq4019-phy";
 			#phy-cells = <0>;
-- 
2.26.0