Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20200313075131.69837-1-anup.patel@wdc.com>
In-Reply-To: <20200313075131.69837-1-anup.patel@wdc.com>
From:   Anup Patel <anup@brainfault.org>
Date:   Fri, 17 Apr 2020 18:15:31 +0530
Message-ID: <CAAhSdy32E_aTPqij3Lgs3mekMWcHw0VfXSwFc=0K8j+GrC+Kug@mail.gmail.com>
Subject: Re: [PATCH v11 00/20] KVM RISC-V Support
To:     Palmer Dabbelt <palmer@dabbelt.com>,
        Palmer Dabbelt <palmerdabbelt@google.com>
Cc:     Paul Walmsley <paul.walmsley@sifive.com>,
        Albert Ou <aou@eecs.berkeley.edu>,
        Paolo Bonzini <pbonzini@redhat.com>,
        Radim K <rkrcmar@redhat.com>, Alexander Graf <graf@amazon.com>,
        Atish Patra <atish.patra@wdc.com>,
        Alistair Francis <Alistair.Francis@wdc.com>,
        Damien Le Moal <damien.lemoal@wdc.com>,
        Christoph Hellwig <hch@lst.de>,
        KVM General <kvm@vger.kernel.org>,
        kvm-riscv@lists.infradead.org,
        linux-riscv <linux-riscv@lists.infradead.org>,
        "linux-kernel@vger.kernel.org List" <linux-kernel@vger.kernel.org>,
        Anup Patel <anup.patel@wdc.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Palmer,

On Fri, Mar 13, 2020 at 1:22 PM Anup Patel <anup.patel@wdc.com> wrote:
>
> This series adds initial KVM RISC-V support. Currently, we are able to boot
> RISC-V 64bit Linux Guests with multiple VCPUs.
>
> Few key aspects of KVM RISC-V added by this series are:
> 1. Minimal possible KVM world-switch which touches only GPRs and few CSRs.
> 2. Full Guest/VM switch is done via vcpu_get/vcpu_put infrastructure.
> 3. KVM ONE_REG interface for VCPU register access from user-space.
> 4. PLIC emulation is done in user-space.
> 5. Timer and IPI emuation is done in-kernel.
> 6. MMU notifiers supported.
> 7. FP lazy save/restore supported.
> 8. SBI v0.1 emulation for KVM Guest available.
> 9. Forward unhandled SBI calls to KVM userspace.
> 10. Hugepage support for Guest/VM
>
> Here's a brief TODO list which we will work upon after this series:
> 1. SBI v0.2 emulation in-kernel
> 2. SBI v0.2 hart state management emulation in-kernel
> 3. In-kernel PLIC emulation
> 4. ..... and more .....
>
> This series can be found in riscv_kvm_v11 branch at:
> https//github.com/avpatel/linux.git
>
> Our work-in-progress KVMTOOL RISC-V port can be found in riscv_v2 branch
> at: https//github.com/avpatel/kvmtool.git
>
> The QEMU RISC-V hypervisor emulation is done by Alistair and is available
> in mainline/anup/riscv-hyp-ext-v0.5.3 branch at:
> https://github.com/kvm-riscv/qemu.git
>
> To play around with KVM RISC-V, refer KVM RISC-V wiki at:
> https://github.com/kvm-riscv/howto/wiki
> https://github.com/kvm-riscv/howto/wiki/KVM-RISCV64-on-QEMU
>
> Changes since v10:
>  - Rebased patches on Linux-5.6-rc5
>  - Reduce RISCV_ISA_EXT_MAX from 256 to 64
>  - Separate PATCH for removing N-extension related defines
>  - Added comments as requested by Palmer
>  - Fixed HIDELEG CSR programming
>
> Changes since v9:
>  - Squash PATCH19 and PATCH20 into PATCH5
>  - Squash PATCH18 into PATCH11
>  - Squash PATCH17 into PATCH16
>  - Added ONE_REG interface for VCPU timer in PATCH13
>  - Use HTIMEDELTA for VCPU timer in PATCH13
>  - Updated KVM RISC-V mailing list in MAINTAINERS entry
>  - Update KVM kconfig option to depend on RISCV_SBI and MMU
>  - Check for SBI v0.2 and SBI v0.2 RFENCE extension at boot-time
>  - Use SBI v0.2 RFENCE extension in VMID implementation
>  - Use SBI v0.2 RFENCE extension in Stage2 MMU implementation
>  - Use SBI v0.2 RFENCE extension in SBI implementation
>  - Moved to RISC-V Hypervisor v0.5 draft spec
>  - Updated Documentation/virt/kvm/api.txt for timer ONE_REG interface
>  - Rebased patches on Linux-5.5-rc3
>
> Changes since v8:
>  - Rebased series on Linux-5.4-rc3 and Atish's SBI v0.2 patches
>  - Use HRTIMER_MODE_REL instead of HRTIMER_MODE_ABS in timer emulation
>  - Fixed kvm_riscv_stage2_map() to handle hugepages
>  - Added patch to forward unhandled SBI calls to user-space
>  - Added patch for iterative/recursive stage2 page table programming
>  - Added patch to remove per-CPU vsip_shadow variable
>  - Added patch to fix race-condition in kvm_riscv_vcpu_sync_interrupts()
>
> Changes since v7:
> - Rebased series on Linux-5.4-rc1 and Atish's SBI v0.2 patches
> - Removed PATCH1, PATCH3, and PATCH20 because these already merged
> - Use kernel doc style comments for ISA bitmap functions
> - Don't parse X, Y, and Z extension in riscv_fill_hwcap() because it will
>   be added in-future
> - Mark KVM RISC-V kconfig option as EXPERIMENTAL
> - Typo fix in commit description of PATCH6 of v7 series
> - Use separate structs for CORE and CSR registers of ONE_REG interface
> - Explicitly include asm/sbi.h in kvm/vcpu_sbi.c
> - Removed implicit switch-case fall-through in kvm_riscv_vcpu_exit()
> - No need to set VSSTATUS.MXR bit in kvm_riscv_vcpu_unpriv_read()
> - Removed register for instruction length in kvm_riscv_vcpu_unpriv_read()
> - Added defines for checking/decoding instruction length
> - Added separate patch to forward unhandled SBI calls to userspace tool
>
> Changes since v6:
> - Rebased patches on Linux-5.3-rc7
> - Added "return_handled" in struct kvm_mmio_decode to ensure that
>   kvm_riscv_vcpu_mmio_return() updates SEPC only once
> - Removed trap_stval parameter from kvm_riscv_vcpu_unpriv_read()
> - Updated git repo URL in MAINTAINERS entry
>
> Changes since v5:
> - Renamed KVM_REG_RISCV_CONFIG_TIMEBASE register to
>   KVM_REG_RISCV_CONFIG_TBFREQ register in ONE_REG interface
> - Update SPEC in kvm_riscv_vcpu_mmio_return() for MMIO exits
> - Use switch case instead of illegal instruction opcode table for simplicity
> - Improve comments in stage2_remote_tlb_flush() for a potential remote TLB
>   flush optimization
> - Handle all unsupported SBI calls in default case of
>   kvm_riscv_vcpu_sbi_ecall() function
> - Fixed kvm_riscv_vcpu_sync_interrupts() for software interrupts
> - Improved unprivilege reads to handle traps due to Guest stage1 page table
> - Added separate patch to document RISC-V specific things in
>   Documentation/virt/kvm/api.txt
>
> Changes since v4:
> - Rebased patches on Linux-5.3-rc5
> - Added Paolo's Acked-by and Reviewed-by
> - Updated mailing list in MAINTAINERS entry
>
> Changes since v3:
> - Moved patch for ISA bitmap from KVM prep series to this series
> - Make vsip_shadow as run-time percpu variable instead of compile-time
> - Flush Guest TLBs on all Host CPUs whenever we run-out of VMIDs
>
> Changes since v2:
> - Removed references of KVM_REQ_IRQ_PENDING from all patches
> - Use kvm->srcu within in-kernel KVM run loop
> - Added percpu vsip_shadow to track last value programmed in VSIP CSR
> - Added comments about irqs_pending and irqs_pending_mask
> - Used kvm_arch_vcpu_runnable() in-place-of kvm_riscv_vcpu_has_interrupt()
>   in system_opcode_insn()
> - Removed unwanted smp_wmb() in kvm_riscv_stage2_vmid_update()
> - Use kvm_flush_remote_tlbs() in kvm_riscv_stage2_vmid_update()
> - Use READ_ONCE() in kvm_riscv_stage2_update_hgatp() for vmid
>
> Changes since v1:
> - Fixed compile errors in building KVM RISC-V as module
> - Removed unused kvm_riscv_halt_guest() and kvm_riscv_resume_guest()
> - Set KVM_CAP_SYNC_MMU capability only after MMU notifiers are implemented
> - Made vmid_version as unsigned long instead of atomic
> - Renamed KVM_REQ_UPDATE_PGTBL to KVM_REQ_UPDATE_HGATP
> - Renamed kvm_riscv_stage2_update_pgtbl() to kvm_riscv_stage2_update_hgatp()
> - Configure HIDELEG and HEDELEG in kvm_arch_hardware_enable()
> - Updated ONE_REG interface for CSR access to user-space
> - Removed irqs_pending_lock and use atomic bitops instead
> - Added separate patch for FP ONE_REG interface
> - Added separate patch for updating MAINTAINERS file
>
> Anup Patel (16):
>   RISC-V: Export riscv_cpuid_to_hartid_mask() API
>   RISC-V: Add bitmap reprensenting ISA features common across CPUs
>   RISC-V: Remove N-extension related defines
>   RISC-V: Add hypervisor extension related CSR defines
>   RISC-V: Add initial skeletal KVM support
>   RISC-V: KVM: Implement VCPU create, init and destroy functions
>   RISC-V: KVM: Implement VCPU interrupts and requests handling
>   RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls
>   RISC-V: KVM: Implement VCPU world-switch
>   RISC-V: KVM: Handle MMIO exits for VCPU
>   RISC-V: KVM: Handle WFI exits for VCPU
>   RISC-V: KVM: Implement VMID allocator
>   RISC-V: KVM: Implement stage2 page table programming
>   RISC-V: KVM: Implement MMU notifiers
>   RISC-V: KVM: Document RISC-V specific parts of KVM API
>   RISC-V: KVM: Add MAINTAINERS entry
>
> Atish Patra (4):
>   RISC-V: KVM: Add timer functionality
>   RISC-V: KVM: FP lazy save/restore
>   RISC-V: KVM: Implement ONE REG interface for FP registers
>   RISC-V: KVM: Add SBI v0.1 support
>
>  Documentation/virt/kvm/api.rst          | 193 ++++-
>  MAINTAINERS                             |  11 +
>  arch/riscv/Kconfig                      |   2 +
>  arch/riscv/Makefile                     |   2 +
>  arch/riscv/include/asm/csr.h            |  78 +-
>  arch/riscv/include/asm/hwcap.h          |  22 +
>  arch/riscv/include/asm/kvm_host.h       | 264 +++++++
>  arch/riscv/include/asm/kvm_vcpu_timer.h |  44 ++
>  arch/riscv/include/asm/pgtable-bits.h   |   1 +
>  arch/riscv/include/uapi/asm/kvm.h       | 127 +++
>  arch/riscv/kernel/asm-offsets.c         | 148 ++++
>  arch/riscv/kernel/cpufeature.c          |  83 +-
>  arch/riscv/kernel/smp.c                 |   2 +
>  arch/riscv/kvm/Kconfig                  |  34 +
>  arch/riscv/kvm/Makefile                 |  14 +
>  arch/riscv/kvm/main.c                   |  97 +++
>  arch/riscv/kvm/mmu.c                    | 762 ++++++++++++++++++
>  arch/riscv/kvm/tlb.S                    |  43 +
>  arch/riscv/kvm/vcpu.c                   | 997 ++++++++++++++++++++++++
>  arch/riscv/kvm/vcpu_exit.c              | 639 +++++++++++++++
>  arch/riscv/kvm/vcpu_sbi.c               | 171 ++++
>  arch/riscv/kvm/vcpu_switch.S            | 382 +++++++++
>  arch/riscv/kvm/vcpu_timer.c             | 225 ++++++
>  arch/riscv/kvm/vm.c                     |  86 ++
>  arch/riscv/kvm/vmid.c                   | 120 +++
>  drivers/clocksource/timer-riscv.c       |   8 +
>  include/clocksource/timer-riscv.h       |  16 +
>  include/uapi/linux/kvm.h                |   8 +
>  28 files changed, 4564 insertions(+), 15 deletions(-)
>  create mode 100644 arch/riscv/include/asm/kvm_host.h
>  create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h
>  create mode 100644 arch/riscv/include/uapi/asm/kvm.h
>  create mode 100644 arch/riscv/kvm/Kconfig
>  create mode 100644 arch/riscv/kvm/Makefile
>  create mode 100644 arch/riscv/kvm/main.c
>  create mode 100644 arch/riscv/kvm/mmu.c
>  create mode 100644 arch/riscv/kvm/tlb.S
>  create mode 100644 arch/riscv/kvm/vcpu.c
>  create mode 100644 arch/riscv/kvm/vcpu_exit.c
>  create mode 100644 arch/riscv/kvm/vcpu_sbi.c
>  create mode 100644 arch/riscv/kvm/vcpu_switch.S
>  create mode 100644 arch/riscv/kvm/vcpu_timer.c
>  create mode 100644 arch/riscv/kvm/vm.c
>  create mode 100644 arch/riscv/kvm/vmid.c
>  create mode 100644 include/clocksource/timer-riscv.h
>
> --
> 2.17.1
>

Can you please consider PATCH1, PATCH2, and PATCH3 of
this series for Linux-5.7-rcX ??

Regards,
Anup