Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To:     jbrunet@baylibre.com, linux-amlogic@lists.infradead.org,
        linux-clk@vger.kernel.org
Cc:     narmstrong@baylibre.com, mturquette@baylibre.com, sboyd@kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH v2 0/4] clk: meson8b: updates for video clocks / resets
Date:   Fri, 17 Apr 2020 20:41:23 +0200
Message-Id: <20200417184127.1319871-1-martin.blumenstingl@googlemail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This is the first batch of fixes and updates for the Meson8/8b/8m2
clock controller driver.

The first patch fixes the video clock hierarchy. Special thanks to
Neil for providing a lot of details about the video clock tree!

The second and third came up while testing video output on my EC-100
(Endless Mini). This board is special because u-boot does not enable
the video outputs like most other u-boot versions do. However, this
is very useful for development because it shows (the hard way ;))
where the existing code is buggy.

The last patch is a small improvement for the VPU clock so we
utilize the glitch-free mux (on SoCs which support it) and avoid
problems by changing the "live" clock tree at runtime (with the mali
clock this resulted in system hangs/freezes).

In my opinion all of these patches - including the fixes - can go to
"next" because the relevant clock trees are still read-only.


Changes since v1 at [0]:
- updated the description in patch #1 to clarify that (it seems that)
  there is no fixed pre-multiplier for the HDMI PLL (like on GXL for
  example). Spotted by Jerome - thanks!
- simplified the logic for the active_low resets in patch #2 by
  shortening the if ... else. Thanks to Jerome for the suggestion.


[0] https://patchwork.kernel.org/cover/11489079/


Martin Blumenstingl (4):
  clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
  clk: meson: meson8b: Fix the polarity of the RESET_N lines
  clk: meson: meson8b: Fix the vclk_div{1,2,4,6,12}_en gate bits
  clk: meson: meson8b: Make the CCF use the glitch-free VPU mux

 drivers/clk/meson/meson8b.c | 105 +++++++++++++++++++++++++-----------
 1 file changed, 73 insertions(+), 32 deletions(-)

-- 
2.26.1