Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Yangbo Lu <yangbo.lu@nxp.com>
To:     linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Cc:     Yangbo Lu <yangbo.lu@nxp.com>,
        "David S . Miller" <davem@davemloft.net>,
        Richard Cochran <richardcochran@gmail.com>,
        Vladimir Oltean <vladimir.oltean@nxp.com>,
        Claudiu Manoil <claudiu.manoil@nxp.com>,
        Andrew Lunn <andrew@lunn.ch>,
        Vivien Didelot <vivien.didelot@gmail.com>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>,
        Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Subject: [v3, 0/7] Support programmable pins for Ocelot PTP driver
Date:   Mon, 20 Apr 2020 10:46:44 +0800
Message-Id: <20200420024651.47353-1-yangbo.lu@nxp.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The Ocelot PTP clock driver had been embedded into ocelot.c driver.
It had supported basic gettime64/settime64/adjtime/adjfine functions
by now which were used by both Ocelot switch and Felix switch.

This patch-set is to move current ptp clock code out of ocelot.c driver
maintaining as a single ocelot_ptp.c driver, and to implement 4
programmable pins with only PTP_PF_PEROUT function for now.
The PTP_PF_EXTTS function will be supported in the future, and it should
be implemented separately for Felix and Ocelot, because of different
hardware interrupt implementation in them.
---
Changes for v2:
	- Put PTP driver under drivers/net/ethernet/mscc/.
	- Dropped MAINTAINERS patch. Kept original maintaining.
	- Initialized PTP separately in ocelot/felix platforms.
	- Supported PPS case in programmable pin.
	- Supported disabling pin function since deadlock is fixed by Richard.
	- Returned -EBUSY if not finding pin available.
Changes for v3:
	- Re-sent.

Yangbo Lu (7):
  net: mscc: ocelot: move ocelot ptp clock code out of ocelot.c
  net: mscc: ocelot: fix timestamp info if ptp clock does not work
  net: mscc: ocelot: redefine PTP pins
  net: mscc: ocelot: add wave programming registers definitions
  net: mscc: ocelot: support 4 PTP programmable pins
  net: mscc: ocelot: enable PTP programmable pin
  net: dsa: felix: enable PTP programmable pin

 drivers/net/dsa/ocelot/felix.c                     |  27 ++
 drivers/net/dsa/ocelot/felix_vsc9959.c             |   2 +
 drivers/net/ethernet/mscc/Makefile                 |   2 +-
 drivers/net/ethernet/mscc/ocelot.c                 | 212 +-------------
 drivers/net/ethernet/mscc/ocelot.h                 |   3 +-
 drivers/net/ethernet/mscc/ocelot_board.c           |  27 ++
 drivers/net/ethernet/mscc/ocelot_ptp.c             | 324 +++++++++++++++++++++
 drivers/net/ethernet/mscc/ocelot_regs.c            |   2 +
 include/soc/mscc/ocelot.h                          |  15 +-
 .../net/ethernet => include/soc}/mscc/ocelot_ptp.h |  17 ++
 10 files changed, 417 insertions(+), 214 deletions(-)
 create mode 100644 drivers/net/ethernet/mscc/ocelot_ptp.c
 rename {drivers/net/ethernet => include/soc}/mscc/ocelot_ptp.h (52%)

-- 
2.7.4