Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030201AbWCBVhw (ORCPT ); Thu, 2 Mar 2006 16:37:52 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932566AbWCBVhw (ORCPT ); Thu, 2 Mar 2006 16:37:52 -0500 Received: from mail.gmx.net ([213.165.64.20]:24452 "HELO mail.gmx.net") by vger.kernel.org with SMTP id S932306AbWCBVhv (ORCPT ); Thu, 2 Mar 2006 16:37:51 -0500 X-Authenticated: #342784 From: jensmh@gmx.de To: linux-kernel@vger.kernel.org Subject: Re: 2.6.16-rc5 'lost' cpu Date: Thu, 2 Mar 2006 21:37:39 +0000 User-Agent: KMail/1.9.1 Cc: Zwane Mwaikambo References: <200603020505.13108.jensmh@gmx.de> In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200603022137.40710.jensmh@gmx.de> X-Y-GMX-Trusted: 0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 22297 Lines: 467 Zwane Mwaikambo writes: > On Thu, 2 Mar 2006, jensmh@gmx.de wrote: > > > This is a dual xeon system with hyper threading enabled, so there should > > be 4 cpus > > > > jm@voyager ~ $ ll /proc/acpi/processor/ > > total 0 > > dr-xr-xr-x 2 root root 0 Mar 2 05:01 CPU0 > > dr-xr-xr-x 2 root root 0 Mar 2 05:01 CPU1 > > dr-xr-xr-x 2 root root 0 Mar 2 05:01 CPU3 > > Can you try sending dmesg output too? here it is, but this time all 4 cpus are detected. Later I will try some reboots and check if I can reproduce the problem. Linux version 2.6.16-rc5 (root@voyager) (gcc version 3.4.5 (Gentoo Hardened 3.4.5-r1, ssp-3.4.5-1.0, pie-8.7.9)) #1 SMP PREEMPT Wed Mar 1 02:29:54 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff75000 (usable) BIOS-e820: 000000007ff75000 - 000000007ff77000 (ACPI NVS) BIOS-e820: 000000007ff77000 - 000000007ff98000 (ACPI data) BIOS-e820: 000000007ff98000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 On node 0 totalpages: 524149 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294773 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x000febc0 ACPI: RSDT (v001 DELL WS 650 0x00000008 ASL 0x00000061) @ 0x000fd4d4 ACPI: FADT (v001 DELL WS 650 0x00000008 ASL 0x00000061) @ 0x000fd50c ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xffff373d ACPI: MADT (v001 DELL WS 650 0x00000008 ASL 0x00000061) @ 0x000fd580 ACPI: BOOT (v001 DELL WS 650 0x00000008 ASL 0x00000061) @ 0x000fd604 ACPI: ASF! (v016 DELL WS 650 0x00000008 ASL 0x00000061) @ 0x000fd62c ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:2 APIC version 20 ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48]) IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) Built 1 zonelists Kernel command line: udev root=/dev/ram0 init=/linuxrc real_root=/dev/hda7 vga=ext mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec80000) mapped IOAPIC to ffffa000 (fec80800) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c05af000 soft=c05a7000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2791.896 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x50 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2071896k/2096596k available (3030k kernel code, 23456k reserved, 1473k data, 232k init, 1179092k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5588.75 BogoMIPS (lpj=2794375) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Checking 'hlt' instruction... OK. CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09 Booting processor 1/1 eip 2000 CPU 1 irqstacks, hard=c05b0000 soft=c05a8000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5581.18 BogoMIPS (lpj=2790590) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09 Booting processor 2/6 eip 2000 CPU 2 irqstacks, hard=c05b1000 soft=c05a9000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5581.31 BogoMIPS (lpj=2790659) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel P4/Xeon Extended MCE MSRs (12) available CPU2: Thermal monitoring enabled CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09 Booting processor 3/7 eip 2000 CPU 3 irqstacks, hard=c05b2000 soft=c05aa000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5581.34 BogoMIPS (lpj=2790673) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel P4/Xeon Extended MCE MSRs (12) available CPU3: Thermal monitoring enabled CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09 Total of 4 processors activated (22332.59 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs migration_cost=1000,2000 checking if image is initramfs... it is Freeing initrd memory: 753k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfbdd5, last bus=5 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0b: ioport range 0x800-0x85f could not be reserved pnp: 00:0b: ioport range 0xc00-0xc7f has been reserved pnp: 00:0b: ioport range 0x860-0x8ff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fc000000-fdffffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:02:1d.0 IO window: e000-efff MEM window: fe300000-fe4fffff PREFETCH window: disabled. PCI: Bridge: 0000:02:1f.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: e000-efff MEM window: fe100000-fe4fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: f9000000-fbffffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 Simple Boot Flag value 0x87 read from CMOS RAM was invalid Simple Boot Flag at 0x7a set to 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14 highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.6) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [VBTN] Using specific hotkey driver lp: driver loaded but no devices found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel E7505 Chipset. agpgart: AGP aperture is 128M @ 0xe8000000 [drm] Initialized drm 1.0.1 20051102 PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] lp0: using parport0 (interrupt-driven). lp0: console ready Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 6.3.9-k2-NAPI Copyright (c) 1999-2005 Intel Corporation. ACPI: PCI Interrupt 0000:03:0e.0[A] -> GSI 24 (level, low) -> IRQ 169 e1000: 0000:03:0e.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:0d:56:09:09:fb e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: IC35L120AVV207-1, ATA DISK drive hdb: IC35L120AVV207-1, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive hdd: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 234375000 sectors (120000 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > hdb: max request size: 512KiB hdb: 234375000 sectors (120000 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdb2 hdb3 < hdb5 > hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) SCSI Media Changer driver v0.25 ACPI: PCI Interrupt 0000:05:0c.0[A] -> GSI 20 (level, low) -> IRQ 185 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[fbeff800-fbefffff] Max Packet=[2048] IR/IT contexts=[4/8] video1394: Installed video1394 module ieee1394: raw1394: /dev/raw1394 device initialized ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 i2c /dev entries driver parport0: cannot grant exclusive access for device i2c-parport i2c-parport: Unable to register with parport : Detection failed at step 5 i2c_adapter i2c-0: Unsupported chip (man_id=0x55, chip_id=0x20). i2c_adapter i2c-0: detect fail: address match, 0x2d pc87360: PC8736x not detected, module not inserted. md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 3536.000 MB/sec raid5: using function: pIII_sse (3536.000 MB/sec) raid6: int32x1 808 MB/s raid6: int32x2 972 MB/s raid6: int32x4 656 MB/s raid6: int32x8 500 MB/s raid6: mmxx1 1929 MB/s raid6: mmxx2 2546 MB/s raid6: sse1x1 1292 MB/s raid6: sse1x2 2367 MB/s raid6: sse2x1 3062 MB/s raid6: sse2x2 2804 MB/s raid6: using algorithm sse2x1 (3062 MB/s) md: raid6 personality registered for level 6 md: faulty personality registered for level -5 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com MC: drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Mar 1 2006 MC: drivers/edac/edac_mc.c: edac_sysfs_memctrl_setup() Registered '.../edac/mc' kobject MC: drivers/edac/edac_mc.c: edac_sysfs_pci_setup() Registered '.../edac/pci' kobject Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC). ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50991 usecs intel8x0: clocking to 48000 ALSA device list: #0: Virtual MIDI Card 1 #1: Intel 82801DB-ICH4 with AD1981B at 0xfe500400, irq 193 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Starting balanced_irq Using IPI Shortcut mode Freeing unused kernel memory: 232k freed usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 201, io mem 0xfe500800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ieee1394: Host added: ID:BUS[0-00:1023] GUID[86ffffffffffff00] usb 1-2: new high speed USB device using ehci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000ff80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000ff60 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000ff40 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1 ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names Linux video capture interface: v1.00 cx2388x v4l2 driver version 0.0.5 loaded ACPI: PCI Interrupt 0000:05:0e.0[A] -> GSI 22 (level, low) -> IRQ 225 CORE cx88[0]: subsystem: 153b:1166, board: Conexant DVB-T reference design [card=19,insmod option] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe cx88[0]/0: found at 0000:05:0e.0, rev: 5, irq: 225, latency: 64, mmio: 0xfa000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff) set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00) set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff) set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff) set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed] cx2388x dvb driver version 0.0.5 loaded ACPI: PCI Interrupt 0000:05:0e.2[A] -> GSI 22 (level, low) -> IRQ 225 cx88[0]/2: found at 0000:05:0e.2, rev: 5, irq: 225, latency: 64, mmio: 0xf9000000 cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (Conexant CX22702 DVB-T)... microcode: CPU1 updated from revision 0xf to 0x2d, date = 08112004 microcode: CPU3 updated from revision 0xf to 0x2d, date = 08112004 microcode: CPU0 updated from revision 0xf to 0x2d, date = 08112004 microcode: CPU2 updated from revision 0xf to 0x2d, date = 08112004 Adding 987988k swap on /dev/mapper/swap1. Priority:-1 extents:1 across:987988k Adding 987988k swap on /dev/mapper/swap2. Priority:-2 extents:1 across:987988k e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex ReiserFS: dm-2: found reiserfs format "3.6" with standard journal ReiserFS: dm-2: using ordered data mode ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-2: checking transaction log (dm-2) ReiserFS: dm-2: Using r5 hash to sort names - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/