Received: by 2002:a25:1985:0:0:0:0:0 with SMTP id 127csp179516ybz; Tue, 21 Apr 2020 18:09:06 -0700 (PDT) X-Google-Smtp-Source: APiQypLU2S5yhTSGfFW9IFmqjxl8FeJfY/C1QHbvtqLiT4/V+9mknSJhLu19YAtG9Hxl9Vi9xzvG X-Received: by 2002:a17:907:2711:: with SMTP id w17mr23531888ejk.116.1587517746284; Tue, 21 Apr 2020 18:09:06 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1587517746; cv=none; d=google.com; s=arc-20160816; b=D2nJtosZPePYv/sYSoz8koTH/i4W8VDNyOHM/cvK6Mbcw36b16TpQLMvhnkAws+15H v+N2FB9TchICA7KbTU7PD6l0i3Tl55fSERISN/MeYA+lYRvbvGwx10eDeBeEn3P2uukx YgyAdnnDvyXhSP8hnr6PA1HwR+E+j6U/3BpcVtjrQvMTJxx9iO4n+YQefA+hGQSJq4Bo z08cbNLswfi4jZDC2yiC/vFhbEMWhd6WkUTiRPl8Biut1i9pLLNThah64tX8a4M4Oc/k W70N8Pke/rCT/NXptIN+9DGkZ+qpE5VfxvpSG/1yEP0+hW7LIWjQ1oudOvP3vqBfOrty CZJw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:in-reply-to:content-disposition :mime-version:references:message-id:subject:cc:to:from:date :dkim-signature; bh=XMNIjMDQQ2P+gDEA7eSw/9JksRGnu2qC9Hhuj0f0V2M=; b=CDbLaDFoI+JLzs8izFXuey5Uq7kkGApXGW0VfzC2xho1WzPYQwlgLpo8tq6puev/OU rFuIw5nm/zooyXDf08SlsYYvWqeMrQ4VAlv/EY4bE3xlcRYG6v6t1UjJkztUenWdpgBI /mNNl0kTaMYr0zCUiXHZ6r5nLBLFIreKCtQD9K7hdukhv/WdKW4e9a72/41NVU0dkbja QiIUrZrW8loB0cA0Z7mPJUFfEh0zy6NE3DCixFQR8D3ngsQtm8ewuycwKRhIU06/lEJj IjqUn4uM58zDFy05OdVcx25z0iOlWKNp9AwROBkD/jHAeVZKWO428T7OsYwkCnMIMrm8 eEKg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b="T4hH/5Uq"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id k6si2740157ejv.507.2020.04.21.18.08.42; Tue, 21 Apr 2020 18:09:06 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b="T4hH/5Uq"; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726335AbgDVBHq (ORCPT + 99 others); Tue, 21 Apr 2020 21:07:46 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34592 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1726055AbgDVBHq (ORCPT ); Tue, 21 Apr 2020 21:07:46 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C07B0C0610D5; Tue, 21 Apr 2020 18:07:45 -0700 (PDT) Received: from pendragon.ideasonboard.com (81-175-216-236.bb.dnainternet.fi [81.175.216.236]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 25C28528; Wed, 22 Apr 2020 03:07:41 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1587517661; bh=u9xtVxTq9p0rM4LsBvFVlD3nptd0TSIuVirjyKpRwdI=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=T4hH/5Uq2ZF3IUkWV7usE/0J5RGVeZ0z41dSX6etxEsrnJy3+dxGHYSTJota7/XUC t1ys/FHEiPf+LLo0yemRaQNOD/qrBje0eHf5mXOH+aJ23rIdVQ3GN2sXRgBnqc3VNC FYfPXLuRGP9tf2MmvbSwt9qBR3ZDk3uL8bKpE0v0= Date: Wed, 22 Apr 2020 04:07:27 +0300 From: Laurent Pinchart To: Adrian Ratiu Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org, Jernej Skrabec , Heiko Stuebner , Jonas Karlman , linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Andrzej Hajda , kernel@collabora.com, linux-stm32@st-md-mailman.stormreply.com, linux-imx@nxp.com, Fabio Estevam , Enric Balletbo Serra , Emil Velikov , Adrian Pop , Arnaud Ferraris , Sjoerd Simons , Martyn Welch Subject: Re: [PATCH v7 4/8] drm: imx: Add i.MX 6 MIPI DSI host platform driver Message-ID: <20200422010727.GM5983@pendragon.ideasonboard.com> References: <20200421161610.1501827-1-adrian.ratiu@collabora.com> <20200421161610.1501827-5-adrian.ratiu@collabora.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <20200421161610.1501827-5-adrian.ratiu@collabora.com> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Adrian, On Tue, Apr 21, 2020 at 07:16:06PM +0300, Adrian Ratiu wrote: > This adds support for the Synopsis DesignWare MIPI DSI v1.01 host > controller which is embedded in i.MX 6 SoCs. > > Based on following patches, but updated/extended to work with existing > support found in the kernel: > > - drm: imx: Support Synopsys DesignWare MIPI DSI host controller > Signed-off-by: Liu Ying > > Cc: Fabio Estevam > Cc: Enric Balletbo Serra > Reviewed-by: Emil Velikov > Tested-by: Adrian Pop > Tested-by: Arnaud Ferraris > Signed-off-by: Sjoerd Simons > Signed-off-by: Martyn Welch > Signed-off-by: Adrian Ratiu > --- > Changes since v6: > - Replaced custom noop encoder with the simple drm encoder (Enric) > - Added CONFIG_DRM_IMX6_MIPI_DSI depends on CONFIG_OF (Enric) > - Dropped imx_mipi_dsi_register() because now it only creates the > dummy encoder which can easily be done directly in imx_dsi_bind() > > Changes since v5: > - Reword to remove unrelated device tree patch mention (Fabio) > - Move pllref_clk enable/disable to bind/unbind (Ezequiel) > - Fix freescale.com -> nxp.com email addresses (Fabio) > - Also added myself as module author (Fabio) > - Use DRM_DEV_* macros for consistency, print more error msg > > Changes since v4: > - Split off driver-specific configuration of phy timings due > to new upstream API. > - Move regmap infrastructure logic to separate commit (Ezequiel) > - Move dsi v1.01 layout addition to a separate commit (Ezequiel) > - Minor warnings and driver name fixes > > Changes since v3: > - Renamed platform driver to reflect it's i.MX6 only. (Fabio) > > Changes since v2: > - Fixed commit tags. (Emil) > > Changes since v1: > - Moved register definitions & regmap initialization into bridge > module. Platform drivers get the regmap via plat_data after > calling the bridge probe. (Emil) > --- > drivers/gpu/drm/imx/Kconfig | 8 + > drivers/gpu/drm/imx/Makefile | 1 + > drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c | 391 +++++++++++++++++++++++++ > 3 files changed, 400 insertions(+) > create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c > > diff --git a/drivers/gpu/drm/imx/Kconfig b/drivers/gpu/drm/imx/Kconfig > index 207bf7409dfba..0dffc72df7922 100644 > --- a/drivers/gpu/drm/imx/Kconfig > +++ b/drivers/gpu/drm/imx/Kconfig > @@ -39,3 +39,11 @@ config DRM_IMX_HDMI > depends on DRM_IMX > help > Choose this if you want to use HDMI on i.MX6. > + > +config DRM_IMX6_MIPI_DSI > + tristate "Freescale i.MX6 DRM MIPI DSI" > + select DRM_DW_MIPI_DSI > + depends on DRM_IMX > + depends on OF > + help > + Choose this if you want to use MIPI DSI on i.MX6. > diff --git a/drivers/gpu/drm/imx/Makefile b/drivers/gpu/drm/imx/Makefile > index 21cdcc2faabc8..9a7843c593478 100644 > --- a/drivers/gpu/drm/imx/Makefile > +++ b/drivers/gpu/drm/imx/Makefile > @@ -9,3 +9,4 @@ obj-$(CONFIG_DRM_IMX_TVE) += imx-tve.o > obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o > > obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o > +obj-$(CONFIG_DRM_IMX6_MIPI_DSI) += dw_mipi_dsi-imx6.o > diff --git a/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c b/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c > new file mode 100644 > index 0000000000000..f8a0a4fe16e21 > --- /dev/null > +++ b/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c > @@ -0,0 +1,391 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * i.MX6 drm driver - MIPI DSI Host Controller > + * > + * Copyright (C) 2011-2015 Freescale Semiconductor, Inc. > + * Copyright (C) 2019-2020 Collabora, Ltd. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "imx-drm.h" > + > +#define DSI_PWR_UP 0x04 > +#define RESET 0 > +#define POWERUP BIT(0) > + > +#define DSI_PHY_IF_CTRL 0x5c > +#define PHY_IF_CTRL_RESET 0x0 > + > +#define DSI_PHY_TST_CTRL0 0x64 > +#define PHY_TESTCLK BIT(1) > +#define PHY_UNTESTCLK 0 > +#define PHY_TESTCLR BIT(0) > +#define PHY_UNTESTCLR 0 > + > +#define DSI_PHY_TST_CTRL1 0x68 > +#define PHY_TESTEN BIT(16) > +#define PHY_UNTESTEN 0 > +#define PHY_TESTDOUT(n) (((n) & 0xff) << 8) > +#define PHY_TESTDIN(n) (((n) & 0xff) << 0) > + > +struct imx_mipi_dsi { > + struct drm_encoder encoder; > + struct device *dev; > + struct regmap *mux_sel; > + struct dw_mipi_dsi *mipi_dsi; > + struct clk *pllref_clk; > + > + void __iomem *base; > + unsigned int lane_mbps; > +}; > + > +struct dphy_pll_testdin_map { > + unsigned int max_mbps; > + u8 testdin; > +}; > + > +/* The table is based on 27MHz DPHY pll reference clock. */ > +static const struct dphy_pll_testdin_map dptdin_map[] = { > + {160, 0x04}, {180, 0x24}, {200, 0x44}, {210, 0x06}, > + {240, 0x26}, {250, 0x46}, {270, 0x08}, {300, 0x28}, > + {330, 0x48}, {360, 0x2a}, {400, 0x4a}, {450, 0x0c}, > + {500, 0x2c}, {550, 0x0e}, {600, 0x2e}, {650, 0x10}, > + {700, 0x30}, {750, 0x12}, {800, 0x32}, {850, 0x14}, > + {900, 0x34}, {950, 0x54}, {1000, 0x74} > +}; > + > +static inline struct imx_mipi_dsi *enc_to_dsi(struct drm_encoder *enc) > +{ > + return container_of(enc, struct imx_mipi_dsi, encoder); > +} > + > +static void imx_mipi_dsi_set_ipu_di_mux(struct imx_mipi_dsi *dsi, int ipu_di) > +{ > + regmap_update_bits(dsi->mux_sel, IOMUXC_GPR3, > + IMX6Q_GPR3_MIPI_MUX_CTL_MASK, > + ipu_di << IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT); > +} > + > +static bool imx_mipi_dsi_encoder_mode_fixup(struct drm_encoder *encoder, > + const struct drm_display_mode *mode, > + struct drm_display_mode *adj_mode) > +{ > + return true; > +} > + > +static int imx_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn) > +{ > + struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state); > + > + /* The following values are taken from dw_hdmi_imx_atomic_check */ > + imx_crtc_state->bus_format = MEDIA_BUS_FMT_RGB888_1X24; > + imx_crtc_state->di_hsync_pin = 2; > + imx_crtc_state->di_vsync_pin = 3; > + > + return 0; > +} No encoder functions please. This should be a bridge driver, the encoder should be created by the i.MX display controller driver itself. As that would require quite a bit of refactoring I'm OK having an encoder here for the meantime, but it should be a dummy one, without any operation. > + > +static void imx_mipi_dsi_encoder_commit(struct drm_encoder *encoder) > +{ > + struct imx_mipi_dsi *dsi = enc_to_dsi(encoder); > + int mux = drm_of_encoder_active_port_id(dsi->dev->of_node, encoder); > + > + imx_mipi_dsi_set_ipu_di_mux(dsi, mux); > +} > + > +static void imx_mipi_dsi_encoder_disable(struct drm_encoder *encoder) > +{ > +} > + > +static const struct drm_encoder_helper_funcs imx_mipi_dsi_encoder_helpers = { > + .mode_fixup = imx_mipi_dsi_encoder_mode_fixup, > + .commit = imx_mipi_dsi_encoder_commit, > + .disable = imx_mipi_dsi_encoder_disable, > + .atomic_check = imx_mipi_dsi_encoder_atomic_check, > +}; > + > +static enum drm_mode_status imx_mipi_dsi_mode_valid(void *priv_data, > + const struct drm_display_mode *mode) > +{ > + /* > + * The VID_PKT_SIZE field in the DSI_VID_PKT_CFG > + * register is 11-bit. > + */ > + if (mode->hdisplay > 0x7ff) > + return MODE_BAD_HVALUE; > + > + /* > + * The V_ACTIVE_LINES field in the DSI_VTIMING_CFG > + * register is 11-bit. > + */ > + if (mode->vdisplay > 0x7ff) > + return MODE_BAD_VVALUE; > + > + return MODE_OK; > +} > + > + > +static unsigned int max_mbps_to_testdin(unsigned int max_mbps) > +{ > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) > + if (dptdin_map[i].max_mbps == max_mbps) > + return dptdin_map[i].testdin; > + > + return -EINVAL; > +} > + > +static inline void dsi_write(struct imx_mipi_dsi *dsi, u32 reg, u32 val) > +{ > + writel(val, dsi->base + reg); > +} > + > +static int imx_mipi_dsi_phy_init(void *priv_data) > +{ > + struct imx_mipi_dsi *dsi = priv_data; > + int testdin; > + > + testdin = max_mbps_to_testdin(dsi->lane_mbps); > + if (testdin < 0) { > + DRM_DEV_ERROR(dsi->dev, > + "failed to get testdin for %dmbps lane clock\n", > + dsi->lane_mbps); > + return testdin; > + } > + > + dsi_write(dsi, DSI_PHY_IF_CTRL, PHY_IF_CTRL_RESET); > + dsi_write(dsi, DSI_PWR_UP, POWERUP); > + > + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR); > + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) | > + PHY_TESTDIN(0x44)); > + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); > + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR); > + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) | > + PHY_TESTDIN(testdin)); > + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); > + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR); > + > + return 0; > +} > + > +static int imx_mipi_dsi_get_lane_mbps(void *priv_data, > + const struct drm_display_mode *mode, > + unsigned long mode_flags, u32 lanes, > + u32 format, unsigned int *lane_mbps) > +{ > + struct imx_mipi_dsi *dsi = priv_data; > + int bpp; > + unsigned int i, target_mbps, mpclk; > + unsigned long pllref; > + > + bpp = mipi_dsi_pixel_format_to_bpp(format); > + if (bpp < 0) { > + DRM_DEV_ERROR(dsi->dev, "failed to get bpp for format %d: %d\n", > + format, bpp); > + return bpp; > + } > + > + pllref = clk_get_rate(dsi->pllref_clk); > + if (pllref != 27000000) > + DRM_WARN("DSI pllref_clk not set to 27Mhz\n"); > + > + mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC); > + if (mpclk) { > + /* take 1/0.7 blanking overhead into consideration */ > + target_mbps = (mpclk * (bpp / lanes) * 10) / 7; > + } else { > + DRM_DEV_ERROR(dsi->dev, "use default 1Gbps DPHY pll clock\n"); > + target_mbps = 1000; > + } > + > + DRM_DEV_DEBUG(dsi->dev, "target pllref_clk frequency is %uMbps\n", > + target_mbps); > + > + for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) { > + if (target_mbps < dptdin_map[i].max_mbps) { > + *lane_mbps = dptdin_map[i].max_mbps; > + dsi->lane_mbps = *lane_mbps; > + DRM_DEV_DEBUG(dsi->dev, > + "real pllref_clk frequency is %uMbps\n", > + *lane_mbps); > + return 0; > + } > + } > + > + DRM_DEV_ERROR(dsi->dev, "DPHY clock frequency %uMbps is out of range\n", > + target_mbps); > + > + return -EINVAL; > +} > + > +static int > +dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps, > + struct dw_mipi_dsi_dphy_timing *timing) > +{ > + timing->clk_hs2lp = 0x40; > + timing->clk_lp2hs = 0x40; > + timing->data_hs2lp = 0x40; > + timing->data_lp2hs = 0x40; > + > + return 0; > +} > + > +static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_imx6_phy_ops = { > + .init = imx_mipi_dsi_phy_init, > + .get_lane_mbps = imx_mipi_dsi_get_lane_mbps, > + .get_timing = dw_mipi_dsi_phy_get_timing, > +}; > + > +static struct dw_mipi_dsi_plat_data imx6q_mipi_dsi_drv_data = { > + .max_data_lanes = 2, > + .mode_valid = imx_mipi_dsi_mode_valid, > + .phy_ops = &dw_mipi_dsi_imx6_phy_ops, > +}; > + > +static const struct of_device_id imx_dsi_dt_ids[] = { > + { > + .compatible = "fsl,imx6q-mipi-dsi", > + .data = &imx6q_mipi_dsi_drv_data, > + }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, imx_dsi_dt_ids); > + > +static int imx_mipi_dsi_bind(struct device *dev, struct device *master, > + void *data) > +{ > + struct imx_mipi_dsi *dsi = dev_get_drvdata(dev); > + struct drm_device *drm = data; > + int ret; > + > + ret = clk_prepare_enable(dsi->pllref_clk); > + if (ret) { > + DRM_DEV_ERROR(dev, "Failed to enable pllref_clk: %d\n", ret); > + return ret; > + } > + > + ret = imx_drm_create_encoder(drm, &dsi->encoder, dsi->dev->of_node); > + if (ret) { > + DRM_DEV_ERROR(dsi->dev, "failed to create drm encoder\n"); > + return ret; > + } > + > + drm_encoder_helper_add(&dsi->encoder, &imx_mipi_dsi_encoder_helpers); > + > + ret = dw_mipi_dsi_bind(dsi->mipi_dsi, &dsi->encoder); > + if (ret) { > + DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +static void imx_mipi_dsi_unbind(struct device *dev, struct device *master, > + void *data) > +{ > + struct imx_mipi_dsi *dsi = dev_get_drvdata(dev); > + > + dw_mipi_dsi_unbind(dsi->mipi_dsi); > + > + clk_disable_unprepare(dsi->pllref_clk); > +} > + > +static const struct component_ops imx_mipi_dsi_ops = { > + .bind = imx_mipi_dsi_bind, > + .unbind = imx_mipi_dsi_unbind, > +}; > + > +static int imx_mipi_dsi_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + const struct of_device_id *of_id = of_match_device(imx_dsi_dt_ids, dev); > + struct dw_mipi_dsi_plat_data *pdata = (struct dw_mipi_dsi_plat_data *) of_id->data; > + struct imx_mipi_dsi *dsi; > + struct resource *res; > + int ret; > + > + dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); > + if (!dsi) > + return -ENOMEM; > + > + dsi->dev = dev; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + dsi->base = devm_ioremap_resource(dev, res); > + if (IS_ERR(dsi->base)) { > + ret = PTR_ERR(dsi->base); > + DRM_DEV_ERROR(dev, "Unable to get dsi registers: %d\n", ret); > + return ret; > + } > + > + dsi->pllref_clk = devm_clk_get(dev, "ref"); > + if (IS_ERR(dsi->pllref_clk)) { > + ret = PTR_ERR(dsi->pllref_clk); > + DRM_DEV_ERROR(dev, "Unable to get pllref_clk: %d\n", ret); > + return ret; > + } > + > + dsi->mux_sel = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,gpr"); > + if (IS_ERR(dsi->mux_sel)) { > + ret = PTR_ERR(dsi->mux_sel); > + DRM_DEV_ERROR(dev, "Failed to get GPR regmap: %d\n", ret); > + return ret; > + } > + > + dev_set_drvdata(dev, dsi); > + > + imx6q_mipi_dsi_drv_data.base = dsi->base; > + imx6q_mipi_dsi_drv_data.priv_data = dsi; > + > + dsi->mipi_dsi = dw_mipi_dsi_probe(pdev, pdata); > + if (IS_ERR(dsi->mipi_dsi)) { > + ret = PTR_ERR(dsi->mipi_dsi); > + DRM_DEV_ERROR(dev, "Failed to probe DW DSI host: %d\n", ret); > + goto err_clkdisable; > + } > + > + return component_add(&pdev->dev, &imx_mipi_dsi_ops); > + > +err_clkdisable: > + clk_disable_unprepare(dsi->pllref_clk); > + return ret; > +} > + > +static int imx_mipi_dsi_remove(struct platform_device *pdev) > +{ > + component_del(&pdev->dev, &imx_mipi_dsi_ops); > + return 0; > +} > + > +static struct platform_driver imx_mipi_dsi_driver = { > + .probe = imx_mipi_dsi_probe, > + .remove = imx_mipi_dsi_remove, > + .driver = { > + .of_match_table = imx_dsi_dt_ids, > + .name = "dw-mipi-dsi-imx6", > + }, > +}; > +module_platform_driver(imx_mipi_dsi_driver); > + > +MODULE_DESCRIPTION("i.MX6 MIPI DSI host controller driver"); > +MODULE_AUTHOR("Liu Ying "); > +MODULE_AUTHOR("Adrian Ratiu "); > +MODULE_LICENSE("GPL"); > -- > 2.26.0 > -- Regards, Laurent Pinchart