Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751713AbWCCV6u (ORCPT ); Fri, 3 Mar 2006 16:58:50 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751716AbWCCV6u (ORCPT ); Fri, 3 Mar 2006 16:58:50 -0500 Received: from bay101-f9.bay101.hotmail.com ([64.4.56.19]:48269 "EHLO hotmail.com") by vger.kernel.org with ESMTP id S1751709AbWCCV6t (ORCPT ); Fri, 3 Mar 2006 16:58:49 -0500 Message-ID: X-Originating-IP: [70.150.153.162] X-Originating-Email: [jtreubig@hotmail.com] From: "John Treubig" To: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org, albertcc@tw.ibm.com Subject: CDROM support for Promise 20269 Date: Fri, 03 Mar 2006 15:58:46 -0600 Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_3a87_3a44_5413" X-OriginalArrivalTime: 03 Mar 2006 21:58:48.0711 (UTC) FILETIME=[A67F1970:01C63F0D] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 16823 Lines: 334 This is a multi-part message in MIME format. ------=_NextPart_000_3a87_3a44_5413 Content-Type: text/plain; format=flowed I've been working on a problem with Promise 20269 PATA adapter under LibATA that if I attach a CDROM drive, I can not see the drive. The message log reports that the driver sees the device, but when I'm fully booted, there's no device available. If I attach it to the motherboard IDE bus, I can access it just fine. I've attached a copy of the boot log and you'll see the motherboard CD/DVD and the one attached to the Promise. I suspect the PDC driver isn't handling the CDrom. I'm currently running 2.6.15. Best wishes, John Treubig VT Miltope ------=_NextPart_000_3a87_3a44_5413 Content-Type: text/plain; name="startup.txt"; format=flowed Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="startup.txt" [ 73.368469] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 73.369256] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 73.370635] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 73.371770] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 73.373119] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 73.398283] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 73.423414] parport: PnPBIOS parport detected. [ 73.448207] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] [ 73.473924] lp0: using parport0 (interrupt-driven). [ 73.499714] Floppy drive(s): fd0 is 1.44M [ 73.539432] FDC 0 is a post-1991 82077 [ 73.566083] loop: loaded (max 8 devices) [ 73.591948] r8169 Gigabit Ethernet driver 2.2LK loaded [ 73.618331] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 73.644798] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16 [ 73.673058] eth0: Identified chip type is 'RTL8169s/8110s'. [ 73.673063] eth0: RTL8169 at 0xd080e000, 00:0d:61:7a:f8:1b, IRQ 16 [ 73.761222] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 73.788587] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 73.816777] NFORCE2: IDE controller at PCI slot 0000:00:09.0 [ 73.845240] NFORCE2: chipset revision 162 [ 73.873659] NFORCE2: not 100% native mode: will probe irqs later [ 73.902703] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller [ 73.931482] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 73.960485] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 73.988760] Probing IDE interface ide0... [ 74.251811] hda: TOSHIBA MK4019GAX, ATA DISK drive [ 74.890885] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 74.919036] Probing IDE interface ide1... [ 75.589842] hdc: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive [ 75.923408] ide1 at 0x170-0x177,0x376 on irq 15 [ 75.951996] hda: max request size: 128KiB [ 76.684039] hda: Host Protected Area detected. [ 76.684040] current capacity is 78138047 sectors (40006 MB) [ 76.684042] native capacity is 78140160 sectors (40007 MB) [ 76.767722] hda: Host Protected Area disabled. [ 76.795182] hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(33) [ 76.823136] hda: cache flushes supported [ 76.851214] hda: hda1 hda2 hda3 [ 76.885378] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 76.913692] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 17 [ 77.152568] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 77.152570] [ 77.152571] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs [ 77.152573] [ 93.666571] Vendor: QUANTUM Model: ATLAS_V_36_SCA Rev: 0230 [ 93.696930] Type: Direct-Access ANSI SCSI revision: 03 [ 93.726541] scsi0:A:6:0: Tagged Queuing enabled. Depth 32 [ 93.755805] target0:0:6: Beginning Domain Validation [ 93.787494] target0:0:6: wide asynchronous. [ 93.818348] target0:0:6: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) [ 93.853396] target0:0:6: Ending Domain Validation [ 95.932410] QLogic Fibre Channel HBA Driver [ 95.962527] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 95.992427] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 18 [ 96.023111] qla2100 0000:01:09.0: Found an ISP2100, irq 18, iobase 0xd0812000 [ 96.054892] qla2100 0000:01:09.0: Configuring PCI space... [ 96.086038] qla2100 0000:01:09.0: Configure NVRAM parameters... [ 96.202033] qla2100 0000:01:09.0: Verifying loaded RISC code... [ 96.395548] qla2100 0000:01:09.0: Waiting for LIP to complete... [ 116.712015] qla2100 0000:01:09.0: Cable is unplugged... [ 116.741540] scsi1 : qla2xxx [ 116.770559] qla2100 0000:01:09.0: [ 116.770560] QLogic Fibre Channel HBA Driver: 8.01.03-k [ 116.770561] QLogic QLA2100 - [ 116.770562] ISP2100: PCI (33 MHz) @ 0000:01:09.0 hdma-, host#=1, fw=1.19.25 TP [ 116.883207] ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device [ 116.912530] scsi2 : SCSI host adapter emulation for IDE ATAPI devices [ 116.941982] Vendor: SONY Model: DVD-ROM DDU1621 Rev: S3.5 [ 116.972660] Type: CD-ROM ANSI SCSI revision: 00 [ 117.002592] libata version 1.20 loaded. [ 117.002623] pata_pdc2027x 0000:01:08.0: version 0.73 [ 117.002648] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16 [ 117.033294] pdc_read_counter: bccrh [7C05] bccrl [7E38] [ 117.063738] pdc_read_counter: bccrhv[7C05] bccrlv[7E38] [ 117.093641] pdc_detect_pll_input_clock: scr[40E20] [ 117.223544] pdc_read_counter: bccrh [7BD2] bccrl [7A41] [ 117.253592] pdc_read_counter: bccrhv[7BD2] bccrlv[7A1A] [ 117.283101] pdc_detect_pll_input_clock: scr[44E20] [ 117.312919] pdc_detect_pll_input_clock: start[1040383544] end[1038711361] [ 117.342897] pdc_detect_pll_input_clock: PLL input clock[16721830]Hz [ 117.372497] pata_pdc2027x 0000:01:08.0: PLL input clock 16721 kHz [ 117.401788] pdc_adjust_pll: pout_required is 133333333 [ 117.431253] pdc_adjust_pll: pll_ctl[D58] [ 117.460259] pdc_adjust_pll: F[117] R[13] ratio*1000[7974] [ 117.489060] pdc_adjust_pll: Writing pll_ctl[D75] [ 117.547079] pdc_adjust_pll: pll_ctl[D75] [ 117.574619] ata1: PATA max UDMA/133 cmd 0xD08197C0 ctl 0xD0819FDA bmdma 0xD0819000 irq 16 [ 117.603113] ata2: PATA max UDMA/133 cmd 0xD08195C0 ctl 0xD0819DDA bmdma 0xD0819008 irq 16 [ 117.631054] pdc2027x_cbl_detect: No cable or 80-conductor cable on port 0 [ 117.963877] ata1: dev 1 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 [ 117.963880] ata1: dev 1 ATAPI, max UDMA/33 [ 117.991560] pdc2027x_set_piomode: adev->pio_mode[C] [ 118.019059] pdc2027x_set_piomode: Set pio regs... [ 118.046224] pdc2027x_set_piomode: Set pio regs done [ 118.073102] pdc2027x_set_piomode: Set to pio mode[4] [ 118.099550] pdc2027x_set_dmamode: Set udma regs... [ 118.125576] pdc2027x_set_dmamode: Set udma regs done [ 118.151159] pdc2027x_set_dmamode: Set to udma mode[2] [ 118.176467] ata1: dev 1 configured for UDMA/33 [ 118.201415] pdc2027x_set_piomode: adev->pio_mode[C] [ 118.225873] pdc2027x_set_piomode: Set pio regs... [ 118.250009] pdc2027x_set_piomode: Set pio regs done [ 118.273955] pdc2027x_set_piomode: Set to pio mode[4] [ 118.297779] pdc2027x_set_dmamode: Set udma regs... [ 118.321415] pdc2027x_set_dmamode: Set udma regs done [ 118.344714] pdc2027x_set_dmamode: Set to udma mode[2] [ 118.367700] scsi3 : pata_pdc2027x [ 118.390701] pdc2027x_cbl_detect: No cable or 80-conductor cable on port 1 [ 118.574623] ATA: abnormal status 0x8 on port 0xD08195DF [ 118.598326] ata2: disabling port [ 118.621489] scsi4 : pata_pdc2027x [ 118.643926] ata1(1): WARNING: ATAPI is disabled, device ignored. [ 118.666412] sata_sil 0000:01:0d.0: version 0.9 [ 118.666686] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 118.689054] ACPI: PCI Interrupt 0000:01:0d.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19 [ 118.712067] ata3: SATA max UDMA/100 cmd 0xD0814080 ctl 0xD081408A bmdma 0xD0814000 irq 19 [ 118.734881] ata4: SATA max UDMA/100 cmd 0xD08140C0 ctl 0xD08140CA bmdma 0xD0814008 irq 19 [ 118.956931] ata3: no device found (phy stat 00000000) [ 118.979151] scsi5 : sata_sil [ 119.201572] ata4: no device found (phy stat 00000000) [ 119.223810] scsi6 : sata_sil [ 119.246507] SCSI device sda: 71722776 512-byte hdwr sectors (36722 MB) [ 119.271242] SCSI device sda: drive cache: write back [ 119.294511] SCSI device sda: 71722776 512-byte hdwr sectors (36722 MB) [ 119.319458] SCSI device sda: drive cache: write back [ 119.342703] sda: sda1 [ 119.365643] sd 0:0:6:0: Attached scsi disk sda [ 119.390260] sr0: scsi-1 drive [ 119.413124] Uniform CD-ROM driver Revision: 3.20 [ 119.436363] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 119.436407] sd 0:0:6:0: Attached scsi generic sg0 type 0 [ 119.460034] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 119.482764] Fusion MPT base driver 3.03.04 [ 119.505782] Copyright (c) 1999-2005 LSI Logic Corporation [ 119.528651] Fusion MPT SPI Host driver 3.03.04 [ 119.551238] Fusion MPT FC Host driver 3.03.04 [ 119.573627] Fusion MPT SAS Host driver 3.03.04 [ 119.596065] Fusion MPT misc device (ioctl) driver 3.03.04 [ 119.619025] mptctl: Registered with Fusion MPT base driver [ 119.642394] mptctl: /dev/mptctl @ (major,minor=10,220) [ 119.666435] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 119.690689] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 20 [ 119.716056] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 119.716061] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 119.741294] ehci_hcd 0000:00:02.2: debug port 1 [ 119.766129] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 119.766187] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 119.791799] ehci_hcd 0000:00:02.2: irq 20, io mem 0xe0005000 [ 119.817600] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 119.844138] hub 1-0:1.0: USB hub found [ 119.870593] hub 1-0:1.0: 6 ports detected [ 119.997462] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 119.997835] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 120.025134] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 21 [ 120.053279] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 120.053283] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 120.081161] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 120.109126] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe0003000 [ 120.189210] hub 2-0:1.0: USB hub found [ 120.216954] hub 2-0:1.0: 3 ports detected [ 120.345277] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 120.372791] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 22 [ 120.400846] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 120.400850] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 120.428412] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 120.456708] ohci_hcd 0000:00:02.1: irq 22, io mem 0xe0004000 [ 120.536699] hub 3-0:1.0: USB hub found [ 120.564187] hub 3-0:1.0: 3 ports detected [ 120.691441] USB Universal Host Controller Interface driver v2.3 [ 120.719125] usbcore: registered new driver usblp [ 120.746503] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 120.774538] Initializing USB Mass Storage driver... [ 120.802508] usbcore: registered new driver usb-storage [ 120.830479] USB Mass Storage support registered. [ 120.858452] usbcore: registered new driver usbhid [ 120.886474] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 120.915021] mice: PS/2 mouse device common for all mice [ 120.944028] NET: Registered protocol family 2 [ 120.981004] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 121.010636] TCP established hash table entries: 16384 (order: 4, 65536 bytes) [ 121.040586] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 121.070582] TCP: Hash tables configured (established 16384 bind 16384) [ 121.100531] TCP reno registered [ 121.130349] ip_conntrack version 2.4 (2047 buckets, 16376 max) - 212 bytes per conntrack [ 121.169397] input: AT Translated Set 2 keyboard as /class/input/input0 [ 121.216672] ip_tables: (C) 2000-2002 Netfilter core team [ 121.289499] ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ [ 121.322405] arp_tables: (C) 2002 David S. Miller [ 121.363396] TCP bic registered [ 121.395559] NET: Registered protocol family 1 [ 121.427331] NET: Registered protocol family 17 [ 121.458822] Using IPI Shortcut mode [ 121.712984] input: ImPS/2 Generic Wheel Mouse as /class/input/input1 [ 121.911704] VFS: Mounted root (ext2 filesystem) readonly. [ 121.943686] Freeing unused kernel memory: 216k freed [ 126.713867] Adding 1188800k swap on /dev/hda3. Priority:-1 extents:1 across:1188800k [ 127.066247] radDIO: module license 'unspecified' taints kernel. [ 127.073618] RAD-DIO driver for NuDAQ PCI-7224 V1.0 [ 127.073623] Developed for Miltope Corp. by Radical Systems, Inc. [ 127.073625] http://www.radicalsystems.com [ 127.073627] Copyright (c) 2004, Radical Systems, Inc. [ 127.073629] All rights reserved. [ 127.080370] Probing... [ 127.080391] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19 [ 127.080402] Found Device: [ 127.080404] Name: 0000:01:06.0 [ 127.080406] InitFlag: 0x7248 [ 127.080407] BusNo: 0x1 [ 127.080409] DevFunc: 0x30 [ 127.080410] LCRBase: 0x7000 [ 127.080412] BaseAddr: 0x7400 [ 127.080413] IRQ No: 0x5 [ 127.150593] sata_promise 0000:01:0a.0: version 1.03 [ 127.150622] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19 [ 127.160906] ata5: SATA max UDMA/133 cmd 0xD086A200 ctl 0xD086A238 bmdma 0x0 irq 19 [ 127.160927] ata6: SATA max UDMA/133 cmd 0xD086A280 ctl 0xD086A2B8 bmdma 0x0 irq 19 [ 127.160949] ata7: SATA max UDMA/133 cmd 0xD086A300 ctl 0xD086A338 bmdma 0x0 irq 19 [ 127.160969] ata8: SATA max UDMA/133 cmd 0xD086A380 ctl 0xD086A3B8 bmdma 0x0 irq 19 [ 127.361569] ata5: no device found (phy stat 00000000) [ 127.361573] scsi7 : sata_promise [ 127.827258] ata6: dev 0 cfg 49:2f00 82:346b 83:5b01 84:4003 85:3469 86:1801 87:4003 88:407f [ 127.827264] ata6: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA [ 127.827268] ata6(0): applying bridge limits [ 127.827417] ata6: dev 0 configured for UDMA/100 [ 127.827420] scsi8 : sata_promise [ 128.034583] ata7: no device found (phy stat 00000000) [ 128.034587] scsi9 : sata_promise [ 128.241278] ata8: no device found (phy stat 00000000) [ 128.241283] scsi10 : sata_promise [ 128.248126] Vendor: ATA Model: ST3120023AS Rev: 3.01 [ 128.248136] Type: Direct-Access ANSI SCSI revision: 05 [ 128.254990] SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB) [ 128.255009] SCSI device sdb: drive cache: write back [ 128.261823] SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB) [ 128.261841] SCSI device sdb: drive cache: write back [ 128.261845] sdb: unknown partition table [ 128.276051] sd 8:0:0:0: Attached scsi disk sdb [ 128.289641] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 128.710768] program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO [ 128.710985] program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO [ 128.711298] program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO [ 128.711519] program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO [ 128.761180] program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO [ 128.761219] program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO [ 128.761257] program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO [ 128.761284] program scsi_unique_id is using a deprecated SCSI ioctl, please convert it to SG_IO [ 129.363382] kjournald starting. Commit interval 5 seconds [ 129.363459] EXT3 FS on hda1, internal journal [ 129.363465] EXT3-fs: mounted filesystem with ordered data mode. [ 141.165353] r8169: eth0: link down ------=_NextPart_000_3a87_3a44_5413-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/