Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Wed, 22 Apr 2020 12:04:18 +0200
From:   Andreas Kemnade <andreas@kemnade.info>
To:     "H. Nikolaus Schaller" <hns@goldelico.com>
Cc:     Tony Lindgren <tony@atomide.com>,
        Evgeniy Polyakov <zbr@ioremap.net>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        linux-omap <linux-omap@vger.kernel.org>,
        Adam Ford <aford173@gmail.com>,
        "Andrew F . Davis" <afd@ti.com>, Vignesh R <vigneshr@ti.com>
Subject: Re: [PATCHv3] w1: omap-hdq: Simplify driver with PM runtime
 autosuspend
Message-ID: <20200422120418.49a40c75@aktux>
In-Reply-To: <D3E40A6A-39B8-4F3F-9ABC-28EAE8D623A6@goldelico.com>
References: <3197C3F0-DEB9-4221-AFBD-4F2A08C84C4C@goldelico.com>
        <20200417164340.3d9043d1@aktux>
        <6430AF54-849E-456B-8DB0-B4478BBDB78D@goldelico.com>
        <20200417150721.GL37466@atomide.com>
        <8E062482-5D5D-4837-9980-D6C708DD24D4@goldelico.com>
        <20200420150802.GR37466@atomide.com>
        <D1A77603-11FB-407F-B480-82C57E742C51@goldelico.com>
        <20200421085336.32cf8ffe@aktux>
        <20200421180220.GB37466@atomide.com>
        <70F19A6E-7B36-4873-9364-F284A14EE3A0@goldelico.com>
        <20200421182017.GC37466@atomide.com>
        <D3E40A6A-39B8-4F3F-9ABC-28EAE8D623A6@goldelico.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Tue, 21 Apr 2020 22:40:39 +0200
"H. Nikolaus Schaller" <hns@goldelico.com> wrote:

> Hi Tony,
> 
> > Am 21.04.2020 um 20:20 schrieb Tony Lindgren <tony@atomide.com>:
> >   
> >> Well, what helps is reverting the patch and using the old driver
> >> (which did work for several years). So I would not assume that
> >> there is a hardware influence. It seems to be something the new
> >> driver is doing differently.  
> > 
> > Well earlier hdq1w.c did not idle, now it does.  
> 
> Ah, I see!
> 
> > If you just want to keep it enabled like earlier, you can just add something like:  
> 
> Well, I don't want it enabled, it just should work as before.
> Ideally including all improvements :)
> 
> > 
> > &hdqw1w {
> > 	ti,no-idle;
> > };  
> 
> I have added that and there might be a slightly different pattern
> (unless that is just by luck): the first two or three attempts to
> read the bq27xx/uevent did still time out. But then the next ones
> worked fine (with a response time of ca. 65 .. 230 ms).
> 
> So as if something needs to be shaken into the right position after
> boot until it works.
> 

What about reading battery with just omap_hdq loaded and then continue
booting as usual, e.g. something like:

have script init-bat.sh
#!/bin/sh
modprobe omap_hdq
cat /sys/class/power_supply/bq27000_battery/uevent
exec /sbin/init "$@"

and then append to kernel parameters init=/init-bat.sh

Regards,
Andreas