Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Dan Murphy <dmurphy@ti.com>
To:     <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
CC:     <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        Dan Murphy <dmurphy@ti.com>, Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>
Subject: [PATCH v20 09/17] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
Date:   Thu, 23 Apr 2020 10:55:16 -0500
Message-ID: <20200423155524.13971-10-dmurphy@ti.com>
In-Reply-To: <20200423155524.13971-1-dmurphy@ti.com>
References: <20200423155524.13971-1-dmurphy@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add the reg property to each channel node.  This update is
to accomodate the multicolor framework.  In addition to the
accomodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 2b9423d55c37..77aa90640052 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -258,29 +258,35 @@ leds: led-controller@30 {
 		reg = <0x30>;
 		clock-mode = /bits/ 8 <1>;
 		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		chan0 {
+		chan@0 {
 			chan-name = "R";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
 		};
 
-		chan1 {
+		chan@1 {
 			chan-name = "G";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
 		};
 
-		chan2 {
+		chan@2 {
 			chan-name = "B";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
 		};
 
-		chan3 {
+		chan@3 {
 			chan-name = "W";
 			led-cur = /bits/ 8 <0x0>;
 			max-cur = /bits/ 8 <0x0>;
+			reg = <3>;
 		};
 	};
 
-- 
2.25.1