Received: by 2002:a25:1985:0:0:0:0:0 with SMTP id 127csp755097ybz; Fri, 24 Apr 2020 08:45:13 -0700 (PDT) X-Google-Smtp-Source: APiQypIacSs2or/uY8hv1y1aKi6G5ULeRdqMkJKqnzQ/RxSiW+NPrSNLGdMS7KO8RTgTE1MMkTI8 X-Received: by 2002:a17:907:20f7:: with SMTP id rh23mr7476858ejb.71.1587743112776; Fri, 24 Apr 2020 08:45:12 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1587743112; cv=none; d=google.com; s=arc-20160816; b=d8PRV226YjmY9JRfioBJRFpFQeE2p9gVySpZapue2CwTZ7rxK73BzocG0ToRx2JA6B rVZbQ3wL6MuT0w+wpeJiH22TrwUte3ehYA8YcKaZdSsDkH+tvCq/DM/Wun4in4ORppQC jZy1G416O2DxhFXlG4a4vqMim6MilkHIbyxZPY3s+oUhXzYuZyt8SoWHEDxsDRhsvlfN ifoST+4x5vm5lfcd+ewuf+9nRqRa7AjMs/wtCPIZbq9KZjmseR8Zb8XTj4+EwqXrjOc7 iTz9ueCBomqRGjbLnkCPWrf2lB2JsQBSqff5fn4V/co81NhUNTuQvMMw89g6+t55khcy 0z9w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :message-id:date:subject:cc:to:from:dkim-signature:dkim-signature; bh=SjPxpBg04ATGSZdAKkAXPSZsAfVM7yh1JfLe0zEl7+g=; b=J90NZNX1hkrAo996tcKpKMcAzXiLElrZahekBin8V7V/CmLP2KbBLBBALGZ7wSCErH uoXMoDmQXkXlLPYJddefsxSZdBrlSsGlcHL+pauLzRBU6rnNH5n/dHPIC4nGzYsrs7yF G6o5LvyxCIvZcbNX7eLBOaw0+FYiiRwdzOvN8pcX85NHjSU6It8TzRlFmYRugkMUh4/f wZtiAl0B24gGWea+h+670f5bq14vtcTLHcLaZJYi6qJ/lZhZK2RA1zCzF0fXpM5Yd7dy fPUVF77VIefd+M966iiUv2z0o87eDXnOmlNARq9mM5ieJ08NInYsWYOIfUWQeE5emZux rpmQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@cerno.tech header.s=fm2 header.b=hXx0pIW5; dkim=pass header.i=@messagingengine.com header.s=fm2 header.b=Mlb9b22b; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=cerno.tech Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id e17si3519846edr.16.2020.04.24.08.44.44; Fri, 24 Apr 2020 08:45:12 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@cerno.tech header.s=fm2 header.b=hXx0pIW5; dkim=pass header.i=@messagingengine.com header.s=fm2 header.b=Mlb9b22b; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=cerno.tech Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729194AbgDXPlh (ORCPT + 99 others); Fri, 24 Apr 2020 11:41:37 -0400 Received: from wnew2-smtp.messagingengine.com ([64.147.123.27]:53303 "EHLO wnew2-smtp.messagingengine.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726872AbgDXPf2 (ORCPT ); Fri, 24 Apr 2020 11:35:28 -0400 Received: from compute4.internal (compute4.nyi.internal [10.202.2.44]) by mailnew.west.internal (Postfix) with ESMTP id 9CAB9FDA; Fri, 24 Apr 2020 11:35:25 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute4.internal (MEProxy); Fri, 24 Apr 2020 11:35:26 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=cerno.tech; h= from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; s=fm2; bh=SjPxpBg04ATGSZdAKkAXPSZsAf VM7yh1JfLe0zEl7+g=; b=hXx0pIW5H8BKgxYN5+QEQdnnjQ5VQEwDdfb6ZhEByP GKZ9hwUMYt7pqdLXhch+mA9jgB3Adrv/HyDlNuCgUq72qQvz8yz5XwwETqvWdyyN ZVuUbiWmlarvOILFIQ1RBq3DR57O1YRXxzZQlfkMrvagjeLUCFofh6XLHYxMIgot 4jMLccyBWEZKoCWsxN7TxlqbS7bB/Rd5YdaLVTAqXb6JCkYIASpzKlpG/5ftDlGW hTlYYnrFzeDV0SG66oXCEfVXtTJ3SolcTuy+qHUPL7KXgcH9FAos87+Cma0q3dBs paxKMjqcVpxJ7HVpdBLjvTALLY/llROoP7KpzTtR5wNw== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:content-transfer-encoding:date:from :message-id:mime-version:subject:to:x-me-proxy:x-me-proxy :x-me-sender:x-me-sender:x-sasl-enc; s=fm2; bh=SjPxpBg04ATGSZdAK kAXPSZsAfVM7yh1JfLe0zEl7+g=; b=Mlb9b22bSR7Hde/F/dOJZYLIEqC89YPy3 dxlDHjk7qb0FbxPg4LmdM+oiYQEXossulDcC154qk3ECA7hMlWXRUBr/MTuOlsQJ fR1cRUKfBRpkXuK8XIWmU8pbzu9mAQHrYuIQ2Cr5j5QrUU/HsZiEZdsECd3J8as0 pl6OQ4CySam4FBpmwnjdw2x0N0O16W1jYT+tjwo3KWW3qZmX/u4DWaSInv+S3PsY wMuB+HcolHeWv+OHBerU6xxC21MwzGD9VfhshMW99kjCWVol/dpNXIYum6jy614p 4sxf/+nFaIOxthKOW779h+4Mo+Rh5S88eT2OH+65zyxuw750tpPqg== X-ME-Sender: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgeduhedrhedugdekiecutefuodetggdotefrodftvf curfhrohhfihhlvgemucfhrghsthforghilhdpqfgfvfdpuffrtefokffrpgfnqfghnecu uegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenuc fjughrpefhvffufffkofgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucft ihhprghrugcuoehmrgigihhmvgestggvrhhnohdrthgvtghhqeenucffohhmrghinheprh grshhpsggvrhhrhihpihdrtghomhenucfkphepledtrdekledrieekrdejieenucevlhhu shhtvghrufhiiigvpedtnecurfgrrhgrmhepmhgrihhlfhhrohhmpehmrgigihhmvgestg gvrhhnohdrthgvtghh X-ME-Proxy: Received: from localhost (lfbn-tou-1-1502-76.w90-89.abo.wanadoo.fr [90.89.68.76]) by mail.messagingengine.com (Postfix) with ESMTPA id F1F24328006C; Fri, 24 Apr 2020 11:35:21 -0400 (EDT) From: Maxime Ripard To: Nicolas Saenz Julienne , Eric Anholt Cc: dri-devel@lists.freedesktop.org, linux-rpi-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Dave Stevenson , Tim Gover , Phil Elwell , Maxime Ripard , devicetree@vger.kernel.org, Kamal Dasu , linux-clk@vger.kernel.org, linux-i2c@vger.kernel.org, Michael Turquette , Philipp Zabel , Rob Herring , Stephen Boyd , Wolfram Sang Subject: [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipeline Date: Fri, 24 Apr 2020 17:33:41 +0200 Message-Id: X-Mailer: git-send-email 2.26.0 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi everyone, Here's a (pretty long) series to introduce support in the VC4 DRM driver for the display pipeline found in the BCM2711 (and thus the RaspberryPi 4). The main differences are that there's two HDMI controllers and that there's more pixelvalve now. Those pixelvalve come with a mux in the HVS that still have only 3 FIFOs. Both of those differences are breaking a bunch of expectations in the driver, so we first need a good bunch of cleanup and reworks to introduce support for the new controllers. Similarly, the HDMI controller has all its registers shuffled and split in multiple controllers now, so we need a bunch of changes to support this as well. Only the HDMI support is enabled for now (even though the DPI output has been tested too). There's a couple of rough edges still that should be addressed in the next versions: - After a modeset, it's likely that the pixels will be shifted by one. - Dual output doesn't work - The transposer (and thus writeback) doesn't work either and conflicts with the output mux too. Let me know if you have any comments Maxime Cc: bcm-kernel-feedback-list@broadcom.com Cc: devicetree@vger.kernel.org Cc: Kamal Dasu Cc: linux-clk@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: Michael Turquette Cc: Philipp Zabel Cc: Rob Herring Cc: Stephen Boyd Cc: Wolfram Sang Changes from v1: - Rebased on top of 5.7-rc1 - Run checkpatch - Added audio support - Fixed some HDMI timeouts - Swiched to clk_hw_register_gate_parent_data - Reorder Kconfig symbols in drivers/i2c/busses - Make the firmware clocks a child of the firmware node - Switch DVP clock driver to clk_hw interface - constify raspberrypi_clk_data in raspberrypi_clock_property - Don't mark firmware clocks as IGNORE_UNUSED - Change from reset_ms to reset_us in reset-simple, and add a bit more comments - Remove generic clk patch to test if a NULL pointer is returned - Removed misleading message in the is_prepared renaming patch commit message - Constify HDMI controller variants - Fix a bug in the allocation size of the clk data array - Added a mention in the DT binding conversion patches about the breakage - Merged a few fixes from kbuild - Fixed a few bisection and CEC build issues - Collected Acked-by and Reviewed-by - Change Dave email address to raspberrypi.com Dave Stevenson (6): drm/vc4: Add support for the BCM2711 HVS5 drm/vc4: plane: Improve LBM usage drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default. drm/vc4: hdmi: Add audio-related callbacks Florian Fainelli (1): dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML Maxime Ripard (84): i2c: brcmstb: Allow to compile it on BCM2835 dt-bindings: clock: Add a binding for the RPi Firmware clocks firmware: rpi: Only create clocks device if we don't have a node for it clk: bcm: rpi: Allow the driver to be probed by DT clk: bcm: rpi: Statically init clk_init_data clk: bcm: rpi: Use clk_hw_register for pllb_arm clk: bcm: rpi: Remove global pllb_arm clock pointer clk: bcm: rpi: Make sure pllb_arm is removed clk: bcm: rpi: Remove pllb_arm_lookup global pointer clk: bcm: rpi: Switch to clk_hw_register_clkdev clk: bcm: rpi: Make sure the clkdev lookup is removed clk: bcm: rpi: Create a data structure for the clocks clk: bcm: rpi: Add clock id to data clk: bcm: rpi: Pass the clocks data to the firmware function clk: bcm: rpi: Rename is_prepared function clk: bcm: rpi: Split pllb clock hooks clk: bcm: rpi: Make the PLLB registration function return a clk_hw clk: bcm: rpi: Add DT provider for the clocks clk: bcm: rpi: Discover the firmware clocks ARM: dts: bcm2711: Add firmware clocks node reset: Move reset-simple header out of drivers/reset reset: simple: Add reset callback dt-bindings: clock: Add BCM2711 DVP binding clk: bcm: Add BCM2711 DVP driver ARM: dts: bcm2711: Add HDMI DVP dt-bindings: display: Convert VC4 bindings to schemas dt-bindings: display: vc4: dpi: Add missing clock-names property dt-bindings: display: vc4: dsi: Add missing clock properties dt-bindings: display: vc4: hdmi: Add missing clock-names property dt-bindings: display: vc4: Document BCM2711 VC5 drm/vc4: drv: Add include guards drm/vc4: drv: Support BCM2711 dt-bindings: display: Add support for the BCM2711 HVS drm/vc4: hvs: Boost the core clock during modeset drm/vc4: plane: Move planes creation to its own function drm/vc4: plane: Move additional planes creation to driver drm/vc4: plane: Register all the planes at once drm/vc4: plane: Create overlays for any CRTC drm/vc4: plane: Create more planes drm/vc4: crtc: Rename SoC data structures drm/vc4: crtc: Move crtc state to common header drm/vc4: crtc: Deal with different number of pixel per clock drm/vc4: crtc: Use a shared interrupt drm/vc4: crtc: Turn static const variable into a define drm/vc4: crtc: Move the cob allocation outside of bind drm/vc4: crtc: Rename HVS channel to output drm/vc4: crtc: Use local chan variable drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable drm/vc4: crtc: Assign output to channel automatically drm/vc4: crtc: Add FIFO depth to vc4_crtc_data drm/vc4: crtc: Add function to compute FIFO level bits drm/vc4: crtc: Rename HDMI encoder type to HDMI0 drm/vc4: crtc: Add HDMI1 encoder type drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt drm/vc4: crtc: Disable color management for HVS5 dt-bindings: display: vc4: pv: Add BCM2711 pixel valves drm/vc4: crtc: Add BCM2711 pixelvalves drm/vc4: hdmi: Use debugfs private field drm/vc4: hdmi: Move structure to header drm/vc4: hdmi: rework connectors and encoders drm/vc4: hdmi: Remove DDC argument to connector_init drm/vc4: hdmi: Rename hdmi to vc4_hdmi drm/vc4: hdmi: Move accessors to vc4_hdmi drm/vc4: hdmi: Use local vc4_hdmi directly drm/vc4: hdmi: Add container_of macros for encoders and connectors drm/vc4: hdmi: Pass vc4_hdmi to CEC code drm/vc4: hdmi: Remove vc4_dev hdmi pointer drm/vc4: hdmi: Remove vc4_hdmi_connector drm/vc4: hdmi: Introduce resource init and variant drm/vc4: hdmi: Implement a register layout abstraction drm/vc4: hdmi: Add reset callback drm/vc4: hdmi: Add PHY init and disable function drm/vc4: hdmi: Add PHY RNG enable / disable function drm/vc4: hdmi: Add a CSC setup callback drm/vc4: hdmi: Store the encoder type in the variant structure drm/vc4: hdmi: Deal with multiple debugfs files drm/vc4: hdmi: Move CEC init to its own function drm/vc4: hdmi: Add CEC support flag drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate drm/vc4: hdmi: Support the BCM2711 HDMI controllers dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings ARM: dts: bcm2711: Enable the display pipeline Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt | 14 +- Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml | 59 +++- Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml | 47 ++- Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 174 +-------- Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml | 109 +++++- Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml | 72 +++- Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml | 84 ++++- Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml | 80 ++++- Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml | 53 ++- Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml | 45 ++- Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml | 37 ++- Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml | 42 ++- Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml | 35 ++- Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml | 44 ++- MAINTAINERS | 2 +- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 51 ++- arch/arm/boot/dts/bcm2711.dtsi | 130 +++++- drivers/clk/bcm/Kconfig | 1 +- drivers/clk/bcm/Makefile | 1 +- drivers/clk/bcm/clk-bcm2711-dvp.c | 127 ++++++- drivers/clk/bcm/clk-raspberrypi.c | 280 +++++++++---- drivers/firmware/raspberrypi.c | 17 +- drivers/gpu/drm/vc4/Makefile | 1 +- drivers/gpu/drm/vc4/vc4_crtc.c | 328 +++++++++------ drivers/gpu/drm/vc4/vc4_drv.c | 5 +- drivers/gpu/drm/vc4/vc4_drv.h | 58 ++- drivers/gpu/drm/vc4/vc4_hdmi.c | 1536 ++++++++++++++++++++++++++++++++++++++++++------------------------------ drivers/gpu/drm/vc4/vc4_hdmi.h | 179 ++++++++- drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 508 ++++++++++++++++++++++++- drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 451 +++++++++++++++++++++- drivers/gpu/drm/vc4/vc4_hvs.c | 25 +- drivers/gpu/drm/vc4/vc4_kms.c | 181 +++++++- drivers/gpu/drm/vc4/vc4_plane.c | 271 +++++++++---- drivers/gpu/drm/vc4/vc4_regs.h | 173 +++----- drivers/i2c/busses/Kconfig | 4 +- drivers/reset/reset-simple.c | 27 +- drivers/reset/reset-simple.h | 41 +-- drivers/reset/reset-socfpga.c | 3 +- drivers/reset/reset-sunxi.c | 3 +- drivers/reset/reset-uniphier-glue.c | 3 +- include/linux/reset/reset-simple.h | 47 ++- include/soc/bcm2835/raspberrypi-firmware.h | 5 +- 42 files changed, 4109 insertions(+), 1244 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml delete mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml create mode 100644 drivers/clk/bcm/clk-bcm2711-dvp.c create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi.h create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_regs.h delete mode 100644 drivers/reset/reset-simple.h create mode 100644 include/linux/reset/reset-simple.h base-commit: cb3692197b5da2fb898335eec1640db14d92e52e -- git-series 0.9.1