Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Sat, 25 Apr 2020 11:27:11 +0100
From:   Russell King - ARM Linux admin <linux@armlinux.org.uk>
To:     Florinel Iordache <florinel.iordache@nxp.com>
Cc:     davem@davemloft.net, netdev@vger.kernel.org, andrew@lunn.ch,
        f.fainelli@gmail.com, hkallweit1@gmail.com,
        devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
        robh+dt@kernel.org, mark.rutland@arm.com, kuba@kernel.org,
        corbet@lwn.net, shawnguo@kernel.org, leoyang.li@nxp.com,
        madalin.bucur@oss.nxp.com, ioana.ciornei@nxp.com,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v2 2/9] dt-bindings: net: add backplane dt
 bindings
Message-ID: <20200425102711.GW25745@shell.armlinux.org.uk>
References: <1587732391-3374-1-git-send-email-florinel.iordache@nxp.com>
 <1587732391-3374-3-git-send-email-florinel.iordache@nxp.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1587732391-3374-3-git-send-email-florinel.iordache@nxp.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Fri, Apr 24, 2020 at 03:46:24PM +0300, Florinel Iordache wrote:
> diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> index ac471b6..541cee5 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> @@ -93,8 +93,9 @@ properties:
>        - rxaui
>        - xaui
>  
> -      # 10GBASE-KR, XFI, SFI
> +      # 10GBASE-KR, 40GBASE-KR4, XFI, SFI
>        - 10gbase-kr
> +      - 40gbase-kr4
>        - usxgmii

This makes a nonsense of the comment (and is actually something I failed
to update with the 10GBASE-R change).

The comment "10GBASE-KR, XFI, SFI" was there to describe _only_ the
following option, so your addition should look like:

	# 10GBASE-KR, XFI, SFI
	- 10gbase-kr
	# 40GBASE-KR4
	- 40gbase-kr4

Whereas there should also be a fix for the lack of 10GBASE-R, so it
should finally look like this:

	# 10GBASE-R, XFI, SFI
	- 10gbase-r
	# 10GBASE-KR (10GBASE-R with backplane negotiation)
	- 10gbase-kr
	# 40GBASE-KR4 (...)
	- 40gbase-kr4

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up