Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20200428142629.8950-1-peron.clem@gmail.com>
In-Reply-To: <20200428142629.8950-1-peron.clem@gmail.com>
From:   =?UTF-8?B?Q2zDqW1lbnQgUMOpcm9u?= <peron.clem@gmail.com>
Date:   Tue, 28 Apr 2020 16:30:06 +0200
Message-ID: <CAJiuCcevho5fGxW+WLHtJAqfYw+desy5-PipBvtz_vbH6EXVPQ@mail.gmail.com>
Subject: Re: [PATCH v2] arm64: dts: allwinner: h6: Use dummy regulator for
 Tanix TX6
To:     Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
        Rob Herring <robh+dt@kernel.org>
Cc:     linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
        devicetree <devicetree@vger.kernel.org>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        linux-sunxi <linux-sunxi@googlegroups.com>,
        Piotr Oniszczuk <warpme@o2.pl>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Maxime, Warpme,

On Tue, 28 Apr 2020 at 16:26, Cl=C3=A9ment P=C3=A9ron <peron.clem@gmail.com=
> wrote:
>
> Tanix TX6 has a fixed regulator. As DVFS is instructed to change
> voltage to meet OPP table, the DVFS is not working as expected.
>
> Avoid to introduce a new dedicated OPP Table where voltage are
> equals to the fixed regulator as it will only duplicate all the OPPs.
> Instead remove the fixed regulator so the DVFS framework will create
> dummy regulator and will have the same behavior.
>
> Add some comments to explain this in the device-tree.

Changes since v1:
I have change this patch to use dummy regulator and add comment about
this choice.
I think it's a bit better than just dropping the regulator.

@Piotr Oniszczuk:
Please add your tested-by tag, to be sure this is working as expected !

Thanks & Regards
Clement

>
> Reported-by: Piotr Oniszczuk <warpme@o2.pl>
> Fixes: add1e27fb703 ("arm64: dts: allwinner: h6: Enable CPU opp tables fo=
r Tanix TX6")
> Signed-off-by: Cl=C3=A9ment P=C3=A9ron <peron.clem@gmail.com>
> ---
>  .../boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch=
/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
> index be81330db14f..3e96fcb317ea 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
> @@ -48,7 +48,15 @@
>  };
>
>  &cpu0 {
> -       cpu-supply =3D <&reg_vdd_cpu_gpu>;
> +       /*
> +        * Don't specify the CPU regulator, as it's a fixed
> +        * regulator DVFS will not work as it is intructed
> +        * to reach a voltage which can't be reached.
> +        * Not specifying a regulator will create a dummy
> +        * regulator allowing all OPPs.
> +        *
> +        * cpu-supply =3D <&reg_vdd_cpu_gpu>;
> +        */
>  };
>
>  &de {
> @@ -68,7 +76,13 @@
>  };
>
>  &gpu {
> -       mali-supply =3D <&reg_vdd_cpu_gpu>;
> +       /*
> +        * Don't specify the GPU regulator, see comment
> +        * above for the CPU supply.
> +        *
> +        * mali-supply =3D <&reg_vdd_cpu_gpu>;
> +        */
> +
>         status =3D "okay";
>  };
>
> --
> 2.20.1
>