Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751183AbWCGOdq (ORCPT ); Tue, 7 Mar 2006 09:33:46 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751075AbWCGOdq (ORCPT ); Tue, 7 Mar 2006 09:33:46 -0500 Received: from mail.gmx.net ([213.165.64.20]:6817 "HELO mail.gmx.net") by vger.kernel.org with SMTP id S1750828AbWCGOdp convert rfc822-to-8bit (ORCPT ); Tue, 7 Mar 2006 09:33:45 -0500 X-Authenticated: #8834078 From: Dominik Karall To: Andrew Morton Subject: Re: 2.6.16-rc5-mm2 Date: Tue, 7 Mar 2006 15:33:41 +0100 User-Agent: KMail/1.9.1 Cc: linux-kernel@vger.kernel.org, john stultz References: <20060303045651.1f3b55ec.akpm@osdl.org> <200603052354.02828.dominik.karall@gmx.net> <20060306214357.0b299686.akpm@osdl.org> In-Reply-To: <20060306214357.0b299686.akpm@osdl.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Content-Disposition: inline Message-Id: <200603071533.41430.dominik.karall@gmx.net> X-Y-GMX-Trusted: 0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19471 Lines: 426 On Tuesday, 7. March 2006 06:43, Andrew Morton wrote: > Dominik Karall wrote: > > On Friday, 3. March 2006 13:56, Andrew Morton wrote: > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc > > >5/2. 6.16-rc5-mm2/ > > > > hi, > > I don't know why, but it seems that the kernel doesn't use the correct > > BIOS time. I set it to the 23:30 and after booting I got ~01:00 (next > > day). > > Is that new behaviour? ?What's the most recent -mm kernel which that > machine ran? > > The full dmesg output might tell us something. I bootet 2.6.16-rc5 now, but the bug is still present. I set BIOS time to 15:07 and after booting linux showed 17:35. Here is the dmesg output: Linux version 2.6.16-rc5 (root@localhost) (gcc-Version 4.1.0 (Gentoo 4.1.0)) #6 SMP PREEMPT Tue Mar 7 15:04:35 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff30000 (usable) BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa8b0 ACPI: XSDT (v001 A M I OEMXSDT 0x08000403 MSFT 0x00000097) @ 0x000000003ff30100 ACPI: FADT (v003 A M I OEMFACP 0x08000403 MSFT 0x00000097) @ 0x000000003ff30290 ACPI: MADT (v001 A M I OEMAPIC 0x08000403 MSFT 0x00000097) @ 0x000000003ff30390 ACPI: OEMB (v001 A M I OEMBIOS 0x08000403 MSFT 0x00000097) @ 0x000000003ff40040 ACPI: DSDT (v001 A0058 A0058002 0x00000002 MSFT 0x0100000d) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000003ff30000 NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000003ff30000 On node 0 totalpages: 258249 DMA zone: 3934 pages, LIFO batch:0 DMA32 zone: 254315 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000) Checking aperture... CPU 0: aperture @ e0000000 size 256 MB Built 1 zonelists Kernel command line: Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2460.198 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 1010564k/1047744k available (3289k kernel code, 36792k reserved, 1308k data, 220k init) Calibrating delay using timer specific routine.. 4928.48 BogoMIPS (lpj=2464243) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(1) -> Node 0 -> Core 0 Using local APIC timer interrupts. result 12813545 Detected 12.813 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... OK. migration_cost=0 DMI 2.3 present. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 256M @ 0xe0000000 PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: fcd00000-fd2fffff PREFETCH window: 9fb00000-dfafffff PCI: Setting latency timer of device 0000:00:01.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] Using specific hotkey driver Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A loop: loaded (max 8 devices) GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 169 sk98lin: Asus mainboard with buggy VPD? Correcting data. eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State PPP generic driver version 2.4.2 Linux video capture interface: v1.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 177 bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 177, latency: 128, mmio: 0xdfe00000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tveeprom 0-0050: Hauppauge model 38074, rev B521, serial# 5099850 tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5) tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 0-0050: audio processor is None (idx 0) tveeprom 0-0050: has radio bttv0: Hauppauge eeprom indicates model#38074 bttv0: using tuner=5 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok input: i2c IR (Hauppauge) as /class/input/input0 ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-0/0-0018/ir0 [bt878 #0 [sw]] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 185 PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: SAMSUNG SP1604N, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. sata_via 0000:00:0f.0: version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 185 PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 9 sata_via 0000:00:0f.0: routed to hard irq line 9 ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 185 ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 185 ata1: SATA link down (SStatus 0) scsi0 : sata_via ata2: SATA link down (SStatus 0) scsi1 : sata_via ieee1394: Initialized config rom entry `ip1394' GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 193 PCI: Via IRQ fixup for 0000:00:07.0, from 11 to 1 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[193] MMIO=[fd800000-fd8007ff] Max Packet=[2048] IR/IT contexts=[4/8] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 input: PC Speaker as /class/input/input2 i2c /dev entries driver device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC). GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201 PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9 PCI: Setting latency timer of device 0000:00:11.5 to 64 codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] ALSA device list: #0: VIA 8237 with AD1980 at 0xc800, irq 201 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered TCP westwood registered TCP htcp registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0) powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xe (1200 mV) powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV) powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x6 (1400 mV) powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0x2 (1500 mV) cpu_init done, current fid 0x10, vid 0x0 powernow-k8: ph2 null fid transition 0x10 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. input: ImPS/2 Generic Wheel Mouse as /class/input/input3 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000ad032e] EXT3-fs: hda1: orphan cleanup on readonly fs kjournald starting. Commit interval 5 seconds ext3_orphan_cleanup: deleting unreferenced inode 1971295 ext3_orphan_cleanup: deleting unreferenced inode 1971248 ext3_orphan_cleanup: deleting unreferenced inode 1971040 EXT3-fs: hda1: 3 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 220k freed Adding 996020k swap on /dev/hda3. Priority:-1 extents:1 across:996020k EXT3 FS on hda1, internal journal ACPI: PCI Interrupt 0000:00:0d.1[A] -> GSI 18 (level, low) -> IRQ 177 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded GSI 21 sharing vector 0xD1 and IRQ 21 ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 209 eth2: Identified chip type is 'RTL8169s/8110s'. eth2: RTL8169 at 0xffffc20000246000, 00:0c:f6:04:87:c0, IRQ 209 USB Universal Host Controller Interface driver v2.3 GSI 22 sharing vector 0xD9 and IRQ 22 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 217 PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 9 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 217, io base 0x0000b400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 217 PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 9 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 217, io base 0x0000b800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 217 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 9 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 217, io base 0x0000c000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 217 PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 9 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 217, io base 0x0000c400 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: new full speed USB device using uhci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected usb 2-1: new full speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004 ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 217 PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 9 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 217, io mem 0xfdf00000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected hub 1-2:1.0: hub_port_status failed (err = -71) hub 1-2:1.0: connect-debounce failed, port 1 disabled hub 1-2:1.0: cannot disable port 1 (err = -71) hub 1-2:1.0: hub_port_status failed (err = -71) hub 1-2:1.0: hub_port_status failed (err = -71) hub 1-2:1.0: hub_port_status failed (err = -71) usb 2-1: USB disconnect, address 2 drivers/usb/class/usblp.c: usblp0: removed usb 5-2: new high speed USB device using ehci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice hub 5-2:1.0: USB hub found hub 5-2:1.0: 4 ports detected usb 1-2: USB disconnect, address 2 usb 5-2.1: new high speed USB device using ehci_hcd and address 4 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) usb 5-2.1: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb 2-1: new full speed USB device using uhci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004 Vendor: Generic Model: 223 U HS-CF Rev: 1.95 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:0: Attached scsi removable disk sda sd 2:0:0:0: Attached scsi generic sg0 type 0 Vendor: Generic Model: 223 U HS-MS Rev: 1.95 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:1: Attached scsi removable disk sdb sd 2:0:0:1: Attached scsi generic sg1 type 0 usb-storage: device scan complete ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ReiserFS: dm-0: Using r5 hash to sort names eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled scatter-gather: disabled tx-checksum: disabled rx-checksum: disabled PPP BSD Compression module registered PPP Deflate Compression module registered usb 5-2.2: new high speed USB device using ehci_hcd and address 5 usb 5-2.2: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning Vendor: ST325082 Model: 3A Rev: 3.02 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 03 00 00 00 sdc: assuming drive cache: write through SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 03 00 00 00 sdc: assuming drive cache: write through sdc:<6>Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive. sdc1 sdc2 sd 3:0:0:0: Attached scsi disk sdc sd 3:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 [drm] Initialized radeon 1.22.0 20051229 on minor 0 agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [drm] Loading R300 Microcode agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [drm] Loading R300 Microcode - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/