Date: Tue, 7 Mar 2006 12:00:39 -0800
From: "Randy.Dunlap" <rdunlap@xenotime.net>
To: Reg Clemens <reg@dwf.com>
Cc: reg@dwf.com, rlrevell@joe-job.com, linux-kernel@vger.kernel.org
Subject: Re: vmlinuz-2.6.16-rc5-git8 still nogo with Intel D945 Motherboard
Message-Id: <20060307120039.61649a89.rdunlap@xenotime.net>
In-Reply-To: <200603071932.k27JW0UH003735@deneb.dwf.com>
References: <200603070340.k273ev0A003594@deneb.dwf.com>
	<1141703317.25487.142.camel@mindpipe>
	<200603070823.k278NE9o006674@deneb.dwf.com>
	<20060307081806.0af1d2c4.rdunlap@xenotime.net>
	<200603071820.k27IKSsm003595@deneb.dwf.com>
	<20060307104646.9b2e193d.rdunlap@xenotime.net>
	<200603071932.k27JW0UH003735@deneb.dwf.com>
Organization: YPO4
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 4162
Lines: 110

On Tue, 07 Mar 2006 12:32:00 -0700 Reg Clemens wrote:

> 
> > 
> > Both boot logs contains the Cannot messages.
> 
> Hadn't noticed that, since it worked, I hadnt looked that carefully, sorry.
> 
> > The "bad" log also contains:
> > Mar  7 10:58:41 deneb kernel: PCI: Failed to allocate mem resource #6:20000@48000000 for 0000:01:00.0
> > 
> 
> Yep.
> 
> > Is device 0:01:00.0 your Nvidia video card?
> > Is there an updated NVRM driver for it (guessing from your OK boot log)
> > for 2.6.15 or later?
> 
> Yes, I am running with the NVIDIA
>     NVIDIA-Linux-x86-1.0-6629-pkg1.run
> driver, tho the 'nv' in the system works.
> 
> > 
> > I suppose an lspci might help.  I dunno.
> 
> ---
> 
> Here is the lspci, run from 2.6.11, but I dont think that should matter...
> 
> [root@deneb reg]# /sbin/lspci
> 00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02)
> 00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port (rev 02)
> 00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition 
> Audio Controller (rev 01)
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 
> (rev 01)
> 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 
> (rev 01)
> 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 
> (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 
> (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 
> (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 
> (rev 01)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 
> (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
> Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface 
> Bridge (rev 01)
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller 
> (rev 01)
> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial 
> ATA Storage Controllers cc=IDE (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
> 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev 
> a2)
> 05:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
> 05:02.0 Multimedia audio controller: Creative Labs SB Audigy LS
> 05:03.0 Ethernet controller: D-Link System Inc Gigabit Ethernet Adapter (rev 
> 11)
> 
> ---
> 
> Did you notice that the following three pnp messages talk about the same
> memory ranges, but different devices (5 vs 6), 

Yes, I saw that.

> Mar  7 11:02:21 deneb kernel: PCI: Cannot allocate resource region 1 of device 
> 0000:05:01.0
> Mar  7 11:02:21 deneb kernel: PCI: Cannot allocate resource region 2 of device 
> 0000:05:01.0
> Mar  7 11:02:21 deneb kernel: pnp: 00:05: ioport range 0x500-0x53f has been 
> reserved
> Mar  7 11:02:21 deneb kernel: pnp: 00:05: ioport range 0x400-0x47f could not 
> be reserved
> Mar  7 11:02:21 deneb kernel: pnp: 00:05: ioport range 0x680-0x6ff has been 
> reserved
> 
> ---
> 
> Mar  7 10:58:41 deneb kernel: PCI: Cannot allocate resource region 1 of device 
> 0000:05:01.0
> Mar  7 10:58:41 deneb kernel: PCI: Cannot allocate resource region 2 of device 
> 0000:05:01.0
> Mar  7 10:58:41 deneb kernel: pnp: 00:06: ioport range 0x500-0x53f has been 
> reserved
> Mar  7 10:58:41 deneb kernel: pnp: 00:06: ioport range 0x400-0x47f could not 
> be reserved
> Mar  7 10:58:41 deneb kernel: pnp: 00:06: ioport range 0x680-0x6ff has been 
> reserved
> Mar  7 10:58:41 deneb kernel: PCI: Failed to allocate mem resource 
> #6:20000@48000000 for 0000:01:00.0
> 
> -- 
> Im not sure what the significance of that is, just noticed the difference.

Ditto.  Please send an lspci -v.

---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/