Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Date:   Wed, 29 Apr 2020 23:45:27 -0700
From:   rananta@codeaurora.org
To:     Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc:     agross@kernel.org, bjorn.andersson@linaro.org, robh+dt@kernel.org,
        jassisinghbrar@gmail.com, linux-arm-msm@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Subject: Re: [PATCH 2/2] soc: qcom: ipcc: Add support for IPCC controller
In-Reply-To: <20200430063054.18879-2-manivannan.sadhasivam@linaro.org>
References: <20200430063054.18879-1-manivannan.sadhasivam@linaro.org>
 <20200430063054.18879-2-manivannan.sadhasivam@linaro.org>
Message-ID: <93afcf6810308580a299905da2b8dad0@codeaurora.org>
User-Agent: Roundcube Webmail/1.3.9
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 2020-04-29 23:30, Manivannan Sadhasivam wrote:
> +static int qcom_ipcc_probe(struct platform_device *pdev)
> +{
> +	struct qcom_ipcc_proto_data *proto_data;
> +	int ret;
> +
> +	proto_data = devm_kzalloc(&pdev->dev, sizeof(*proto_data), 
> GFP_KERNEL);
> +	if (!proto_data)
> +		return -ENOMEM;
> +
> +	ipcc_proto_data = proto_data;
> +	proto_data->dev = &pdev->dev;
> +
> +	proto_data->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(proto_data->base)) {
> +		dev_err(&pdev->dev, "Failed to ioremap the ipcc base addr\n");
> +		return PTR_ERR(proto_data->base);
> +	}
> +
> +	proto_data->irq = platform_get_irq(pdev, 0);
> +	if (proto_data->irq < 0) {
> +		dev_err(&pdev->dev, "Failed to get the IRQ\n");
> +		return proto_data->irq;
> +	}
> +
> +	/* Perform a SW reset on this client's protocol state */
> +	writel(0x1, proto_data->base + IPCC_REG_CLIENT_CLEAR);
We can skip doing a SW reset here. Few of the subsystems may be brought 
out of reset via the bootloader and the interrupts from them might be 
pending. Doing a SW reset here would clear those interrupts.

Thank you.
Raghavendra