Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
To:     Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
        Gregory Clement <gregory.clement@bootlin.com>,
        Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
        Andrew Murray <amurray@thegoodpenguin.co.uk>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Remi Pommarel <repk@triplefau.lt>,
        =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>,
        Tomasz Maciej Nowak <tmn505@gmail.com>,
        Xogium <contact@xogium.me>
Cc:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-pci@vger.kernel.org
Subject: [PATCH v4 09/12] dt-bindings: PCI: aardvark: Describe new properties
Date:   Thu, 30 Apr 2020 10:06:22 +0200
Message-Id: <20200430080625.26070-10-pali@kernel.org>
In-Reply-To: <20200430080625.26070-1-pali@kernel.org>
References: <20200430080625.26070-1-pali@kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Marek Behún <marek.behun@nic.cz>

Document the possibility to reference a PHY and reset-gpios and to set
max-link-speed property.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
---
 Documentation/devicetree/bindings/pci/aardvark-pci.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
index 310ef7145c47..2b8ca920a7fa 100644
--- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -19,6 +19,9 @@ contain the following properties:
  - interrupt-map-mask and interrupt-map: standard PCI properties to
    define the mapping of the PCIe interface to interrupt numbers.
  - bus-range: PCI bus numbers covered
+ - phys: the PCIe PHY handle
+ - max-link-speed: see pci.txt
+ - reset-gpios: see pci.txt
 
 In addition, the Device Tree describing an Aardvark PCIe controller
 must include a sub-node that describes the legacy interrupt controller
@@ -48,6 +51,7 @@ Example:
 				<0 0 0 2 &pcie_intc 1>,
 				<0 0 0 3 &pcie_intc 2>,
 				<0 0 0 4 &pcie_intc 3>;
+		phys = <&comphy1 0>;
 		pcie_intc: interrupt-controller {
 			interrupt-controller;
 			#interrupt-cells = <1>;
-- 
2.20.1