Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Ansuel Smith <ansuelsmth@gmail.com>
To:     Bjorn Andersson <bjorn.andersson@linaro.org>
Cc:     Abhishek Sahu <absahu@codeaurora.org>,
        Ansuel Smith <ansuelsmth@gmail.com>,
        Andy Gross <agross@kernel.org>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Stanimir Varbanov <svarbanov@mm-sol.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
        Andrew Murray <amurray@thegoodpenguin.co.uk>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 03/11] PCI: qcom: change duplicate PCI reset to phy reset
Date:   Fri,  1 May 2020 00:06:10 +0200
Message-Id: <20200430220619.3169-4-ansuelsmth@gmail.com>
In-Reply-To: <20200430220619.3169-1-ansuelsmth@gmail.com>
References: <20200430220619.3169-1-ansuelsmth@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Abhishek Sahu <absahu@codeaurora.org>

The deinit issues reset_control_assert for PCI twice and does not contain
phy reset.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 2a39dfdccfc8..7a8901efc031 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -280,14 +280,14 @@ static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
 
+	clk_disable_unprepare(res->phy_clk);
 	reset_control_assert(res->pci_reset);
 	reset_control_assert(res->axi_reset);
 	reset_control_assert(res->ahb_reset);
 	reset_control_assert(res->por_reset);
-	reset_control_assert(res->pci_reset);
+	reset_control_assert(res->phy_reset);
 	clk_disable_unprepare(res->iface_clk);
 	clk_disable_unprepare(res->core_clk);
-	clk_disable_unprepare(res->phy_clk);
 	clk_disable_unprepare(res->aux_clk);
 	clk_disable_unprepare(res->ref_clk);
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
@@ -325,12 +325,6 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 		goto err_clk_core;
 	}
 
-	ret = clk_prepare_enable(res->phy_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable phy clock\n");
-		goto err_clk_phy;
-	}
-
 	if (res->aux_clk) {
 		ret = clk_prepare_enable(res->aux_clk);
 		if (ret) {
@@ -387,6 +381,12 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 		return ret;
 	}
 
+	ret = clk_prepare_enable(res->phy_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable phy clock\n");
+		goto err_deassert_ahb;
+	}
+
 	/* wait for clock acquisition */
 	usleep_range(1000, 1500);
 
@@ -404,8 +404,6 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 err_clk_ref:
 	clk_disable_unprepare(res->aux_clk);
 err_clk_aux:
-	clk_disable_unprepare(res->phy_clk);
-err_clk_phy:
 	clk_disable_unprepare(res->core_clk);
 err_clk_core:
 	clk_disable_unprepare(res->iface_clk);
-- 
2.25.1