Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Ansuel Smith <ansuelsmth@gmail.com>
To:     Bjorn Andersson <bjorn.andersson@linaro.org>
Cc:     Ansuel Smith <ansuelsmth@gmail.com>,
        Andy Gross <agross@kernel.org>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Stanimir Varbanov <svarbanov@mm-sol.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
        Andrew Murray <amurray@thegoodpenguin.co.uk>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 08/11] devicetree: bindings: pci: document PARF params bindings
Date:   Fri,  1 May 2020 00:06:15 +0200
Message-Id: <20200430220619.3169-9-ansuelsmth@gmail.com>
In-Reply-To: <20200430220619.3169-1-ansuelsmth@gmail.com>
References: <20200430220619.3169-1-ansuelsmth@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

It is now supported the editing of Tx De-Emphasis, Tx Swing and
Rx equalization params on ipq8064. Document this new optional params.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 .../devicetree/bindings/pci/qcom,pcie.txt     | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 6efcef040741..8cc5aea8a1da 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -254,6 +254,42 @@
 			- "perst-gpios"	PCIe endpoint reset signal line
 			- "wake-gpios"	PCIe endpoint wake signal line
 
+- qcom,tx-deemph-gen1:
+	Usage: optional (available for ipq/apq8064)
+	Value type: <u32>
+	Definition: Gen1 De-emphasis value.
+		    For ipq806x should be set to 24.
+
+- qcom,tx-deemph-gen2-3p5db:
+	Usage: optional (available for ipq/apq8064)
+	Value type: <u32>
+	Definition: Gen2 (3.5db) De-emphasis value.
+		    For ipq806x should be set to 24.
+
+- qcom,tx-deemph-gen2-6db:
+	Usage: optional (available for ipq/apq8064)
+	Value type: <u32>
+	Definition: Gen2 (6db) De-emphasis value.
+		    For ipq806x should be set to 34.
+
+- qcom,tx-swing-full:
+	Usage: optional (available for ipq/apq8064)
+	Value type: <u32>
+	Definition: TX launch amplitude swing_full value.
+		    For ipq806x should be set to 120.
+
+- qcom,tx-swing-low:
+	Usage: optional (available for ipq/apq8064)
+	Value type: <u32>
+	Definition: TX launch amplitude swing_low value.
+		    For ipq806x should be set to 120.
+
+- qcom,rx0-eq:
+	Usage: optional (available for ipq/apq8064)
+	Value type: <u32>
+	Definition: RX0 equalization value.
+		    For ipq806x should be set to 4.
+
 * Example for ipq/apq8064
 	pcie@1b500000 {
 		compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie";
-- 
2.25.1