Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH 0/5] soc: ti: add k3 platforms chipid module driver
To:     Dave Gerlach <d-gerlach@ti.com>,
        Santosh Shilimkar <ssantosh@kernel.org>,
        Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>,
        Rob Herring <robh+dt@kernel.org>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will@kernel.org>,
        Lokesh Vutla <lokeshvutla@ti.com>
CC:     Sekhar Nori <nsekhar@ti.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
References: <20200423180545.13707-1-grygorii.strashko@ti.com>
From:   Grygorii Strashko <grygorii.strashko@ti.com>
Message-ID: <23b3b069-426e-a113-a8bf-816b30f10490@ti.com>
Date:   Fri, 1 May 2020 23:55:11 +0300
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.7.0
MIME-Version: 1.0
In-Reply-To: <20200423180545.13707-1-grygorii.strashko@ti.com>
Content-Type: text/plain; charset="utf-8"; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Santosh, Tero

On 23/04/2020 21:05, Grygorii Strashko wrote:
> Hi All,
> 
> This series introduces TI K3 Multicore SoC platforms chipid module driver
> which provides identification support of the TI K3 SoCs (family, revision)
> and register this information with the SoC bus. It is available under
> /sys/devices/soc0/ for user space, and can be checked, where needed,
> in Kernel using soc_device_match().
> It is also required for introducing support for new revisions of
> K3 AM65x/J721E SoCs.
> 
> Example J721E:
>    # cat /sys/devices/soc0/{machine,family,revision}
>    Texas Instruments K3 J721E SoC
>    J721E
>    SR1.0
> 
> Example AM65x:
>    # cat /sys/devices/soc0/{machine,family,revision}
>    Texas Instruments AM654 Base Board
>    AM65X
>    SR1.0
> 
> Grygorii Strashko (5):
>    dt-bindings: soc: ti: add binding for k3 platforms chipid module
>    soc: ti: add k3 platforms chipid module driver
>    arm64: arch_k3: enable chipid driver
>    arm64: dts: ti: k3-am65-wakeup: add k3 platforms chipid module node
>    arm64: dts: ti: k3-j721e-mcu-wakeup: add k3 platforms chipid module
>      node
> 
>   .../bindings/soc/ti/k3-socinfo.yaml           |  40 ++++++
>   arch/arm64/Kconfig.platforms                  |   1 +
>   arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi    |   5 +
>   .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |   5 +
>   drivers/soc/ti/Kconfig                        |  10 ++
>   drivers/soc/ti/Makefile                       |   1 +
>   drivers/soc/ti/k3-socinfo.c                   | 135 ++++++++++++++++++
>   7 files changed, 197 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
>   create mode 100644 drivers/soc/ti/k3-socinfo.c
> 

Any more comments? I'm going resend it.

-- 
Best regards,
grygorii