Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Sat, 2 May 2020 08:30:36 +0200
From:   Sam Ravnborg <sam@ravnborg.org>
To:     dillon min <dillon.minfei@gmail.com>
Cc:     Alexandre Torgue <alexandre.torgue@st.com>, airlied@linux.ie,
        Daniel Vetter <daniel@ffwll.ch>, robh+dt@kernel.org,
        dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, mcoquelin.stm32@gmail.com,
        linux-stm32@st-md-mailman.stormreply.com,
        linux-arm-kernel@lists.infradead.org, thierry.reding@gmail.com
Subject: Re: [PATCH 1/4] add dts node for drm panel driver ili9341 add dts
 i2c3 for stmpe touch add dts spi5 for gyro & ili9341
Message-ID: <20200502063036.GA9204@ravnborg.org>
References: <1588239802-11442-1-git-send-email-dillon.minfei@gmail.com>
 <33f928e7-3fde-99a2-b84d-d74a2d3f1186@st.com>
 <CAL9mu0+AqO69+rEcH=HVWRhDLbqDO52-Cjxt-PAZmg6=7QtpvQ@mail.gmail.com>
 <40bdf88c-fbc2-564c-1aec-38318bab5e61@st.com>
 <CAL9mu0KRPPrTUWggs2dQWPGjkyubUMpYx=3JzOpwTPQPHjsGhw@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CAL9mu0KRPPrTUWggs2dQWPGjkyubUMpYx=3JzOpwTPQPHjsGhw@mail.gmail.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi dillon min

> > okay, thanks alexandre, i will go through these docs. currently i'm on may
> day holiday,  will be back at  next wensday.
> after go back to work. i will separate this patch to five part with 9
> patchs , should be more clear
> 
> dts releated
>     1,  ARM: dts: stm32: Add i2c3 node for stm32f429
>     2,  ARM: dts: stm32: Add drm panel ili9341 nodes connect to ldtc
> support for stm32f429-disco board
>     3,  ARM: dts: stm32: Add stmpe811 touch screen support for
> stm32f429-disco board
>     4,  ARM: dts: stm32: Add l3gd20 gyroscope sensor support for
> stm32f429-disco board
> 
> clk releated
>     1, clk: stm32: Fix ltdc loading hang in set clk rate, pll_hw set to
> clks[PLL_VCO_SAI] but not clks[PLL_SAI]
>     2, clk: stm32: Add CLK_IGNORE_UNUSED flags for ltdc, make sure ltdc clk
> not be released after system startup
> 
> spi releated
>     1, spi: stm32: Add transfer mode SPI_SIMPLE_RX, SPI_3WIRE_RX support
> for stm32f4
> 
> drm releated
>     1, drm/panel: Add panel driver ilitek-ili9341
> 
> doc releated
>      1, dt-bindings: display: panel: Add binding document for Ilitek Ili9341

Patch separation looks good.
Please cc: me on both the binding and the panel patches.
The binding must be in DT Schema format (.yaml).
See a lot of examples in drm-misc-next for inspiration.

Looks forward to see/review your submission.

	Sam