Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: z+8C1aCJOkoJ3lT6HuKSUlbQaE2jCEDsp3Zb+lKplgk/9hVFI5SwAEXQXZO7H7AyrcqVmXTduS
 ttD6htasAS/Q==
IronPort-SDR: Dq52u6PWQtdqZ0Px8+M4c1TID7QfAh+HOAP/p6nNUDLeMMv1hJlRd8Q4jvanxUVo4vadOyl3wp
 vhi+rOAuJUHg==
Reply-To: vadivel.muruganx.ramuthevar@linux.intel.com
Subject: Re: [PATCH v4 2/2] mtd: rawnand: Add NAND controller support on Intel
 LGM SoC
To:     Boris Brezillon <boris.brezillon@collabora.com>
Cc:     tglx@linutronix.de, cheol.yong.kim@intel.com,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        masonccyang@mxic.com.tw, anders.roxell@linaro.org, vigneshr@ti.com,
        arnd@arndb.de, hauke.mehrtens@intel.com, richard@nod.at,
        brendanhiggins@google.com, linux-mips@vger.kernel.org,
        robh+dt@kernel.org, linux-mtd@lists.infradead.org,
        miquel.raynal@bootlin.com, qi-ming.wu@intel.com,
        andriy.shevchenko@intel.com
References: <20200429104205.18780-1-vadivel.muruganx.ramuthevar@linux.intel.com>
 <20200429104205.18780-3-vadivel.muruganx.ramuthevar@linux.intel.com>
 <20200429162249.55d38ee8@collabora.com>
 <9d77c64c-d0f9-7a13-3391-d05bf458bdb1@linux.intel.com>
 <20200429164832.6800fc70@collabora.com>
 <2e83a2f7-853c-f0e2-f686-daf1e0649eae@linux.intel.com>
 <20200429173107.5c6d2f55@collabora.com>
 <1de9ba29-30f1-6829-27e0-6f141e9bb1e6@linux.intel.com>
 <20200430102114.29b6552f@collabora.com>
 <1df71cf7-4cae-4cd0-864c-0812bb2cc123@linux.intel.com>
 <20200430103658.4b0b979e@collabora.com>
 <1d5aec11-a7b5-01c2-6614-16e57c64511b@linux.intel.com>
 <20200430143600.27031639@collabora.com>
 <20200430150124.7856d112@collabora.com>
 <df7c1952-bc9b-bad7-bf31-d09707a0829e@linux.intel.com>
 <20200504090824.1eb16b78@collabora.com>
 <854521ed-b0f9-0f0f-2cd7-5ad11b2d059a@linux.intel.com>
 <20200504091755.0d0e73aa@collabora.com>
 <db023399-8b4d-c75c-30c8-b35e38e2e5f8@linux.intel.com>
 <20200504105828.72aaf7b8@collabora.com>
From:   "Ramuthevar, Vadivel MuruganX" 
        <vadivel.muruganx.ramuthevar@linux.intel.com>
Message-ID: <b9c2bda4-39e0-a53f-528e-9beb50549acf@linux.intel.com>
Date:   Mon, 4 May 2020 17:17:03 +0800
User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:68.0) Gecko/20100101
 Thunderbird/68.7.0
MIME-Version: 1.0
In-Reply-To: <20200504105828.72aaf7b8@collabora.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Boris,

On 4/5/2020 4:58 pm, Boris Brezillon wrote:
> On Mon, 4 May 2020 16:50:08 +0800
> "Ramuthevar, Vadivel MuruganX"
> <vadivel.muruganx.ramuthevar@linux.intel.com> wrote:
> 
>> Hi Boris,
>>
>> On 4/5/2020 3:17 pm, Boris Brezillon wrote:
>>> On Mon, 4 May 2020 15:15:08 +0800
>>> "Ramuthevar, Vadivel MuruganX"
>>> <vadivel.muruganx.ramuthevar@linux.intel.com> wrote:
>>>    
>>>> Hi Boris,
>>>>
>>>>      Thank you very much for the prompt review and suggestions...
>>>>
>>>> On 4/5/2020 3:08 pm, Boris Brezillon wrote:
>>>>> On Mon, 4 May 2020 10:02:35 +0800
>>>>> "Ramuthevar, Vadivel MuruganX"
>>>>> <vadivel.muruganx.ramuthevar@linux.intel.com>  wrote:
>>>>>       
>>>>>> Hi Boris,
>>>>>>
>>>>>> On 30/4/2020 9:01 pm, Boris Brezillon wrote:
>>>>>>> On Thu, 30 Apr 2020 14:36:00 +0200
>>>>>>> Boris Brezillon<boris.brezillon@collabora.com>  wrote:
>>>>>>>          
>>>>>>>> On Thu, 30 Apr 2020 17:07:03 +0800
>>>>>>>> "Ramuthevar, Vadivel MuruganX"
>>>>>>>> <vadivel.muruganx.ramuthevar@linux.intel.com>  wrote:
>>>>>>>>         
>>>>>>>>>>>> The question is, is it the same value we have in nand_pa or it is
>>>>>>>>>>>> different?
>>>>>>>>>>>>                  
>>>>>>>>>>> Different address which is 0xE1400000 NAND_BASE_PHY address.
>>>>>>>>>> Then why didn't you tell me they didn't match when I suggested to pass
>>>>>>>>> sorry, because you keep asking nand_pa after that only I realized that.
>>>>>>>>>             
>>>>>>>>>> nand_pa? So now the question is, what does this address represent?
>>>>>>>>>                     EBU-MODULE
>>>>>>>>>       _________     _______________________
>>>>>>>>> |         |   |            |NAND CTRL  |
>>>>>>>>> | FPI BUS |==>| CS0(0x174) | 0xE100    ( 0xE14/0xE1C) NAND_PHY_BASE
>>>>>>>>> |_________|   |_CS1(0x17C)_|__________ |
>>>>>>>>>
>>>>>>>>> EBU_CONRTROLLER_BASE : 0xE0F0_0000
>>>>>>>>> HSNAND_BASE: 0xE100_0000
>>>>>>>>> NAND_CS0: 0xE140_0000
>>>>>>>>> NAND_CS1: 0xE1C0_0000
>>>>>>>>>
>>>>>>>>> MEM_REGION_BASE_CS0: 0x17400 (internal to ebu controller )
>>>>>>>>> MEM_REGION_BASE_CS1: 0x17C00
>>>>>>>>>             
>>>>>>>> Hm, I wonder if we shouldn't use a 'ranges' property to describe this
>>>>>>>> address translation. Something like
>>>>>>>>
>>>>>>>> 	ebu@xxx {
>>>>>>>> 		ranges = <0x17400000 0xe1400000 0x1000>,
>>>>>>>> 			 <0x17c00000 0xe1c00000 0x1000>;
>>>>>>>> 		reg = <0x17400000>, <0x17c00000>;
>>>>>>>> 		reg-names = "cs-0", "cs-1";
>>>>>>>> 	}
>>>>>>>>
>>>>>>>> The translated address (0xE1X00000) will be available in res->start,
>>>>>>>> and the non-translated one (0x17X00000) can be retrieved with
>>>>>>>> of_get_address(). All you'd have to do then would be calculate the
>>>>>>>> mask:
>>>>>>>>
>>>>>>>> 	mask = (translated_address & original_address) >> 22;
>>>>>>>> 	num_comp_bits = fls(mask);
>>>>>>>> 	WARN_ON(mask != GENMASK(num_comp_bits - 1, 0));
>>>>>>>>
>>>>>>>> Which allows you to properly set the ADDR_SEL() register without
>>>>>>>> relying on some hardcoded values:
>>>>>>>>
>>>>>>>> 	writel(original_address | EBU_ADDR_SEL_REGEN |
>>>>>>>> 	       EBU_ADDR_COMP_BITS(num_comp_bits),
>>>>>>>> 	       ebu_host->ebu + EBU_ADDR_SEL(csid));
>>>>>>>>
>>>>>>>> That's quite important if we want to merge the xway NAND driver with
>>>>>>>> this one.
>>>>>>> Looks like the translation is done at the FPI bus declaration level (see
>>>>>>> [1]). We really need to see the big picture to take a wise decision
>>>>>>> about the bindings. Would you mind pasting your dsti/dts files
>>>>>>> somewhere? It feels like the NAND controller is a sub-part of a more
>>>>>>> generic 'memory' controller, in which case the NAND controller should be
>>>>>>> declared as a child of this generic memory bus (called localbus in [1],
>>>>>>> but maybe EBU is more accurate).
>>>>>>>
>>>>>>> [1]https://github.com/xieyaxiongfly/Atheros_CSI_tool_OpenWRT_src/blob/master/target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi#L162
>>>>>>
>>>>>>      ebu_nand: ebu_nand@e0f00000 {
>>>>>>                      compatible = "intel,lgm-ebu-nand";
>>>>>>                      reg = <0xe0f00000 0x100
>>>>>>                      0xe1000000 0x300
>>>>>>                      0xe1400000 0x80000
>>>>>>                      0xe1c00000 0x10000>;
>>>>>>                      reg-names = "ebunand", "hsnand", "nand_cs0", nand_cs1";
>>>>>>                      dmas = <&dma0 8>, <&dma0 9>;
>>>>>>                      dma-names = "ebu_rx", "ebu_tx";
>>>>>>                      clocks =  <&cgu0 LGM_GCLK_EBU>;
>>>>>>              };
>>>>>>
>>>>>>
>>>>>> 	 &ebu_nand {
>>>>>> 	         status = "disabled";
>>>>>> 	        nand,cs = <1>;
>>>>>> 	        nand-ecc-mode = "hw";
>>>>>> 	        pinctrl-names = "default";
>>>>>> 	        pinctrl-0 = <&ebu_nand_base &ebu_cs1>;
>>>>>> 	};
>>>>>>      
>>>>>>>          
>>>>> Ok. If I understand the SoC topology correctly it should actually be
>>>>> something like that:
>>>>>
>>>>> {
>>>>> 	...
>>>>> 	fpi@xxxxx {
>>>>> 		compatible = "intel,lgm-fpi", "simple-bus";
>>>>>
>>>>> 		/* You might have other ranges to define here */
>>>>> 		ranges = <0x16000000 0xe0000000 0x1000000>;
>>>>>
>>>>> 		...
>>>>
>>>> Sorry, we do not have fpi tree node in our dts/dtsi file instead we have
>>>> the below one.. , that also not included the major peripherals
>>>> controllers node.
>>>>            /* Special part from CPU core */
>>>>            core: core {
>>>>                    compatible = "intel,core", "simple-bus";
>>>>                    #address-cells = <1>;
>>>>                    #size-cells = <1>;
>>>>                    ranges;
>>>>
>>>>                    ioapic1: interrupt-controller@fec00000 {
>>>>                            #interrupt-cells = <2>;
>>>>                            #address-cells = <0>;
>>>>                            compatible = "intel,ce4100-ioapic";
>>>>                            interrupt-controller;
>>>>                            reg = <0xfec00000 0x1000>;
>>>>                            nr_entries = <256>;
>>>>                    };
>>>>
>>>>                    hpet: timer@fed00000 {
>>>>                            compatible = "intel,ce4100-hpet";
>>>>                            reg = <0xfed00000 0x400>;
>>>>                    };
>>>>
>>>>                    lapic0: interrupt-controller@fee00000 {
>>>>                            compatible = "intel,ce4100-lapic";
>>>>                            reg = <0xfee00000 0x1000>;
>>>>                            no_pic_mode;
>>>>                    };
>>>>            };
>>>>
>>>> other than this, rest all in independent node .
>>>
>>> But you do have an FPI bus, right? If this is the case it should be
>>> represented.
>>
>> Yes, FPI bus is slave to core which connects all the peripherals.
>>
>>    Or is the "intel,core" bus actually the FPI bus that you
>>> named differently?
>>
>> FPI slave bus connects to core bus by OCP bridge, so here it is named
>> FPI bus, but SW perspective didn't have root tree which has all
>> sub-nodes, as of now each peripheral has its own node.
> 
> Duh, not sure that's a good idea to hide that, especially since you
> have to describe the address translation that happens when crossing the
> FPI bus (the ranges thing I mentioned previously).

Thanks Boris, Sure I will do as you have suggested.

can I proceed to send next patch-set.

Regards
Vadivel