Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH v2] of: Documentation: change overlay example to use
 current syntax
From:   Frank Rowand <frowand.list@gmail.com>
To:     Rob Herring <robh+dt@kernel.org>, pantelis.antoniou@konsulko.com
Cc:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Geert Uytterhoeven <geert+renesas@glider.be>,
        Alan Tull <atull@kernel.org>,
        Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
References: <1580171838-1770-1-git-send-email-frowand.list@gmail.com>
Message-ID: <03f21610-895f-7223-806b-23c002c6f047@gmail.com>
Date:   Mon, 4 May 2020 15:16:40 -0500
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
 Thunderbird/60.9.0
MIME-Version: 1.0
In-Reply-To: <1580171838-1770-1-git-send-email-frowand.list@gmail.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Rob,

Ping.

There is a conflict between this and Mauro's v3 patch at:

  https://lore.kernel.org/r/cover.1586961793.git.mchehab+huawei@kernel.org

I pointed out the conflict to Mauro in his v2 patch, and he said he would
rebase on a new -next to resolve the conflict.  Unfortunately my patch
was not in -next, so the conflict remains.

If Mauro's patches should go in first, I can redo my patches on top of
his, after his go in.

-Frank

On 1/27/20 6:37 PM, frowand.list@gmail.com wrote:
> From: Frank Rowand <frank.rowand@sony.com>
> 
> The overlay implementation details in the compiled (DTB) file are
> now properly implemented by the dtc compiler and should no longer
> be hard coded in the source file.
> 
> Signed-off-by: Frank Rowand <frank.rowand@sony.com>
> ---
> 
> changes since v1:
>   - fixed typo in patch comment (implementation)
> 
>  Documentation/devicetree/overlay-notes.txt | 85 ++++++++++++------------------
>  1 file changed, 35 insertions(+), 50 deletions(-)
> 
> diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt
> index 725fb8d255c1..fddc63da7dba 100644
> --- a/Documentation/devicetree/overlay-notes.txt
> +++ b/Documentation/devicetree/overlay-notes.txt
> @@ -19,6 +19,7 @@ Lets take an example where we have a foo board with the following base tree:
>  
>  ---- foo.dts -----------------------------------------------------------------
>  	/* FOO platform */
> +	/dts-v1/;
>  	/ {
>  		compatible = "corp,foo";
>  
> @@ -30,30 +31,25 @@ Lets take an example where we have a foo board with the following base tree:
>  		ocp: ocp {
>  			/* peripherals that are always instantiated */
>  			peripheral1 { ... };
> -		}
> +		};
>  	};
>  ---- foo.dts -----------------------------------------------------------------
>  
> -The overlay bar.dts, when loaded (and resolved as described in [1]) should
> +The overlay bar.dts,
>  
> ----- bar.dts -----------------------------------------------------------------
> -/plugin/;	/* allow undefined label references and record them */
> -/ {
> -	....	/* various properties for loader use; i.e. part id etc. */
> -	fragment@0 {
> -		target = <&ocp>;
> -		__overlay__ {
> -			/* bar peripheral */
> -			bar {
> -				compatible = "corp,bar";
> -				... /* various properties and child nodes */
> -			}
> +---- bar.dts - overlay target location by label ------------------------------
> +	/dts-v1/;
> +	/plugin/;
> +	&ocp {
> +		/* bar peripheral */
> +		bar {
> +			compatible = "corp,bar";
> +			... /* various properties and child nodes */
>  		};
>  	};
> -};
>  ---- bar.dts -----------------------------------------------------------------
>  
> -result in foo+bar.dts
> +when loaded (and resolved as described in [1]) should result in foo+bar.dts
>  
>  ---- foo+bar.dts -------------------------------------------------------------
>  	/* FOO platform + bar peripheral */
> @@ -73,8 +69,8 @@ result in foo+bar.dts
>  			bar {
>  				compatible = "corp,bar";
>  				... /* various properties and child nodes */
> -			}
> -		}
> +			};
> +		};
>  	};
>  ---- foo+bar.dts -------------------------------------------------------------
>  
> @@ -82,6 +78,27 @@ As a result of the overlay, a new device node (bar) has been created
>  so a bar platform device will be registered and if a matching device driver
>  is loaded the device will be created as expected.
>  
> +If the base DT was not compiled with the -@ option then the "&ocp" label
> +will not be available to resolve the overlay node(s) to the proper location
> +in the base DT. In this case, the target path can be provided. The target
> +location by label syntax is preferred because the overlay can be applied to
> +any base DT containing the label, no matter where the label occurs in the DT.
> +
> +The above bar.dts example modified to use target path syntax is:
> +
> +---- bar.dts - overlay target location by explicit path ----------------------
> +	/dts-v1/;
> +	/plugin/;
> +	&{/ocp} {
> +		/* bar peripheral */
> +		bar {
> +			compatible = "corp,bar";
> +			... /* various properties and child nodes */
> +		}
> +	};
> +---- bar.dts -----------------------------------------------------------------
> +
> +
>  Overlay in-kernel API
>  --------------------------------
>  
> @@ -105,35 +122,3 @@ enum of_overlay_notify_action for details.
>  Note that a notifier callback is not supposed to store pointers to a device
>  tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
>  respective node it received.
> -
> -Overlay DTS Format
> -------------------
> -
> -The DTS of an overlay should have the following format:
> -
> -{
> -	/* ignored properties by the overlay */
> -
> -	fragment@0 {	/* first child node */
> -
> -		target=<phandle>;	/* phandle target of the overlay */
> -	or
> -		target-path="/path";	/* target path of the overlay */
> -
> -		__overlay__ {
> -			property-a;	/* add property-a to the target */
> -			node-a {	/* add to an existing, or create a node-a */
> -				...
> -			};
> -		};
> -	}
> -	fragment@1 {	/* second child node */
> -		...
> -	};
> -	/* more fragments follow */
> -}
> -
> -Using the non-phandle based target method allows one to use a base DT which does
> -not contain a __symbols__ node, i.e. it was not compiled with the -@ option.
> -The __symbols__ node is only required for the target=<phandle> method, since it
> -contains the information required to map from a phandle to a tree location.
>